Scientific Substantiation of Aspen Wood Use in Wooden Glued Structures

A. Titunin, Alexander A. Fedotov, T. N. Vakhnina, I. Susoeva, Meline S. Gevorgyan
{"title":"Scientific Substantiation of Aspen Wood Use in Wooden Glued Structures","authors":"A. Titunin, Alexander A. Fedotov, T. N. Vakhnina, I. Susoeva, Meline S. Gevorgyan","doi":"10.37482/0536-1036-2023-6-149-161","DOIUrl":null,"url":null,"abstract":"One of the promising materials for construction are wooden glued structures. According to the current regulatory documents, for the production of such structures coniferous wood is usually used, the reserves of which in industrially developed areas have significantly decreased over the last decades. At the same time, in a number of regions of Russia there is a significant raw material reserve of aspen wood, which has been successfully used in the construction of buildings and structures for many centuries. Its physical and mechanical characteristics differ from pine wood from 3.2 to 18.6 %. Therefore, it can be considered as an alternative source of raw materials for wooden house construction enterprises. To assess the degree influence of the combination of coniferous and aspen wood on the strength of the glue joint, as one of the main indicators of the quality of wooden glued structures, a set of theoretical and experimental studies was carried out. Maximum tangential and normal stresses of glue joint in pine and aspen blanks, which are significantly higher than those of solid wood, were determined by calculation. The values of shear strength in glued pine and aspen lamellas (4.46–8.06 MPa), obtained during the experiments at the 1st stage of research, were close to the strength of solid wood. At the 2nd stage the method of dispersion analysis was used, the results confirmed the assumption that when gluing lamellas up to 20 mm thick, the difference in the strength of the glue joint of structures made of pine and structures made of pine and aspen is insignificant. The obtained data serve as a basis for further work on diversification of raw material resources in the production of wooden glued structures due to the involvement of low-demand aspen wood in processing. For citation: Titunin A.A., Gevorgyan M.S., Fedotov A.A., Vakhnina T.N., Susoeva I.V. Scientific Substantiation of Aspen Wood Use in Wooden Glued Structures. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 6, pp. 149–161. (In Russ.). https://doi.org/10.37482/0536-1036-2023-6-149-161","PeriodicalId":508281,"journal":{"name":"Lesnoy Zhurnal (Forestry Journal)","volume":"42 2","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Lesnoy Zhurnal (Forestry Journal)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.37482/0536-1036-2023-6-149-161","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

One of the promising materials for construction are wooden glued structures. According to the current regulatory documents, for the production of such structures coniferous wood is usually used, the reserves of which in industrially developed areas have significantly decreased over the last decades. At the same time, in a number of regions of Russia there is a significant raw material reserve of aspen wood, which has been successfully used in the construction of buildings and structures for many centuries. Its physical and mechanical characteristics differ from pine wood from 3.2 to 18.6 %. Therefore, it can be considered as an alternative source of raw materials for wooden house construction enterprises. To assess the degree influence of the combination of coniferous and aspen wood on the strength of the glue joint, as one of the main indicators of the quality of wooden glued structures, a set of theoretical and experimental studies was carried out. Maximum tangential and normal stresses of glue joint in pine and aspen blanks, which are significantly higher than those of solid wood, were determined by calculation. The values of shear strength in glued pine and aspen lamellas (4.46–8.06 MPa), obtained during the experiments at the 1st stage of research, were close to the strength of solid wood. At the 2nd stage the method of dispersion analysis was used, the results confirmed the assumption that when gluing lamellas up to 20 mm thick, the difference in the strength of the glue joint of structures made of pine and structures made of pine and aspen is insignificant. The obtained data serve as a basis for further work on diversification of raw material resources in the production of wooden glued structures due to the involvement of low-demand aspen wood in processing. For citation: Titunin A.A., Gevorgyan M.S., Fedotov A.A., Vakhnina T.N., Susoeva I.V. Scientific Substantiation of Aspen Wood Use in Wooden Glued Structures. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 6, pp. 149–161. (In Russ.). https://doi.org/10.37482/0536-1036-2023-6-149-161
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
在木质胶合结构中使用杨木的科学依据
木质胶合结构是最有前途的建筑材料之一。根据现行法规文件,生产此类结构通常使用针叶木,而在过去几十年中,工业发达地区的针叶木储量已大幅减少。同时,在俄罗斯的一些地区,杨木的原材料储备量很大,许多世纪以来,杨木一直被成功地用于建筑和结构的建造。其物理和机械特性与松木相差 3.2% 至 18.6%。因此,可以将其视为木屋建筑企业的替代原材料来源。为了评估针叶木和杨木的组合对作为木质胶合结构质量主要指标之一的胶合接头强度的影响程度,我们进行了一系列理论和实验研究。通过计算确定了松木和杨木坯料胶接处的最大切向应力和法向应力,它们明显高于实木。在研究的第一阶段,实验中获得的松木和杨木胶合薄片的剪切强度值(4.46-8.06 兆帕)接近实木的强度。在第二阶段使用了分散分析方法,结果证实了这样的假设,即在粘合厚度达 20 毫米的薄片时,松木结构与松木和杨木结构的胶合强度差异很小。由于在加工过程中使用了需求量较小的杨木,因此所获得的数据可作为进一步开展木质胶合结构生产中原材料资源多样化工作的基础。供引用:Titunin A.A.、Gevorgyan M.S.、Fedotov A.A.、Vakhnina T.N.、Susoeva I.V.《木质胶合结构中使用杨木的科学依据》。Lesnoy Zhurnal = 俄罗斯林业杂志,2023 年,第 6 期,第 149-161 页。(In Russ.). https://doi.org/10.37482/0536-1036-2023-6-149-161
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
The Archives of Clones of Scots Pine Plus Trees in the Republic of Karelia The Genetic Structure Features of the Pinus sylvestris L. Population in the Steppe Zone of European Russia Optimization of the Design Parameters of the Regenerative Rod of a Logging Road Train Formation of Tree Morphology in Cultivated Pine Stands Identification of Damage to Coniferous Stands Based on Comprehensive Analysis of the Results of Remote Sensing of the Earth and Ground Surveys
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1