Influence of Non-Parallelism on the Micro-Interface Lubrication Mechanism of Water-Lubricated Bearings

Abstract

Water-lubricated bearings can effectively solve the pollution problem caused by lubricant leakage and are used in offshore engineering equipment for this reason. Aiming at the problems of unclear and undefined micro-interface lubrication mechanisms of water-lubricated bearings, this paper investigates the influence of non-parallel micro-cavities on the micro-interface lubrication mechanism of bearings. Based on a single micro-cavity model, the lubrication mechanism of micro-cavities is studied in this paper. Lubrication models of the non-parallel contact friction pairs model are built, and the effect of the non-parallelism on the lubrication performance of the micro-cavities is obtained using the computational fluid dynamics method. The results show that, under the same Reynolds number and cavitation pressure, the wedge effect caused by the non-parallelism causes the pressure at the inlet to rise, thus increasing the load-carrying capacity. The existence of non-parallelism limits the rise of the high pressure of the inertia effect on the micro-cavities and reduces the load-carrying capacity. The presence of non-parallelism decreases the area of the negative pressure proportion and increases the proportion of the positive pressure zone inside the micro-cavities, thus increasing the load-carrying capacity.