Maintenance of Pole Mounted Circuit Breaker as Medium Voltage Network Protection at PT PLN (Persero) UP3 Sidoarjo

Abstract

The increasing demand for electricity requires PT PLN (Persero) to provide a sufficient, reliable, safe, high-quality, and efficient source of electrical energy. In serving customers, especially those in the Medium Voltage (MV) category, good protective equipment is needed. However, conventional protective equipment often tends to be large, requires ample land space, and installation is time-consuming. This research covers variables such as contact resistance measurement, PMT (Power Circuit Breaker) synchronism testing, and insulation resistance measurement. Using the Research and Development (R&D) method, the results of maintenance on the 20 kV PMT at PMCB KPI P. Sidomulyo, Buduran Subdistrict, revealed that the contact resistance measurement values for phases R, S, and T were below 100 µΩ, indicating good contact resistance. PMT synchronism testing produced time difference values that were within the permissible standard limits. The time difference when opening (open) was 0.7 ms, while when closing (close), it was 1.05 ms. Insulation resistance measurements showed values that met the standards, which were above 20 MΩ. Based on the research results, PMCB KPI P. Sidomulyo, Buduran Subdistrict, can still be considered suitable for use. With good protective equipment and measurements that meet the standards, the use of 20 kV PMT can remain efficient and safe for consumers. Highlights: Rising Electricity Demand: PT PLN (Persero) faces increasing electricity needs. Advanced Protection Solutions: Innovative equipment addresses conventional limitations. Research Insights: Findings ensure safety and reliability in medium voltage systems. Keywords: Contact Resistance, Insulation Resistance, PMCB, Synchronism Testing