Assessment of the strength deterioration of a coal pillar using a strain-softening time-dependent constitutive model

IF 2.1 4区 材料科学 Q2 MATERIALS SCIENCE, CHARACTERIZATION & TESTING Mechanics of Time-Dependent Materials Pub Date : 2024-04-16 DOI:10.1007/s11043-024-09692-6
Prudhvi Raju Gadepaka,  Sonu, Ashok Jaiswal
{"title":"Assessment of the strength deterioration of a coal pillar using a strain-softening time-dependent constitutive model","authors":"Prudhvi Raju Gadepaka,&nbsp; Sonu,&nbsp;Ashok Jaiswal","doi":"10.1007/s11043-024-09692-6","DOIUrl":null,"url":null,"abstract":"<div><p>In this study, a time-dependent constitutive model of a coal pillar was developed using the Hoek–Brown strain-softening model, which is useful for studying the strength deterioration of a coal pillar over time. A database of 32 failed cases of coal pillars of different ages from the Witbank Coalfield has been utilized to deduce the strength parameters of the coal seam through back analysis. A three-dimensional finite-difference method (FDM) has been chosen to simulate the failed cases. The simulation results have been obtained in terms of pillar strength and FOS of the pillar concerning time. Based on the simulation results the life of the pillar is considered when FOS is nearly equal to 1. The appropriate strength parameters have been derived as peak strength parameters: <span>\\(m_{i} = 1.47\\)</span> and <span>\\(s_{i} = 0.01\\)</span>; residual parameters: <span>\\(m_{r} = 0.125\\)</span> and <span>\\(s_{r} = 0.00001\\)</span>; strength-reduction parameters: <span>\\(\\alpha = 0.04\\)</span>, <span>\\(\\beta = 200\\)</span> for a coal mass. 39 stable cases from the same coalfields (Witbank) have been considered to validate the strength parameters. The simulation results of all the stable cases were showing FOS &gt; 1. The proposed constitutive model is suitable for assessing a pillar’s time-dependent strength deterioration and creep behavior. The deterioration/yielding of the pillar is observed to be initiated from the skin/side, extending deeper into the pillar’s core with time and ultimately forming an hourglass shape. It is also observed that the FOS of the pillar decreases with time.</p></div>","PeriodicalId":698,"journal":{"name":"Mechanics of Time-Dependent Materials","volume":"28 4","pages":"2841 - 2858"},"PeriodicalIF":2.1000,"publicationDate":"2024-04-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Mechanics of Time-Dependent Materials","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11043-024-09692-6","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, CHARACTERIZATION & TESTING","Score":null,"Total":0}
引用次数: 0

Abstract

In this study, a time-dependent constitutive model of a coal pillar was developed using the Hoek–Brown strain-softening model, which is useful for studying the strength deterioration of a coal pillar over time. A database of 32 failed cases of coal pillars of different ages from the Witbank Coalfield has been utilized to deduce the strength parameters of the coal seam through back analysis. A three-dimensional finite-difference method (FDM) has been chosen to simulate the failed cases. The simulation results have been obtained in terms of pillar strength and FOS of the pillar concerning time. Based on the simulation results the life of the pillar is considered when FOS is nearly equal to 1. The appropriate strength parameters have been derived as peak strength parameters: \(m_{i} = 1.47\) and \(s_{i} = 0.01\); residual parameters: \(m_{r} = 0.125\) and \(s_{r} = 0.00001\); strength-reduction parameters: \(\alpha = 0.04\), \(\beta = 200\) for a coal mass. 39 stable cases from the same coalfields (Witbank) have been considered to validate the strength parameters. The simulation results of all the stable cases were showing FOS > 1. The proposed constitutive model is suitable for assessing a pillar’s time-dependent strength deterioration and creep behavior. The deterioration/yielding of the pillar is observed to be initiated from the skin/side, extending deeper into the pillar’s core with time and ultimately forming an hourglass shape. It is also observed that the FOS of the pillar decreases with time.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
利用应变软化随时间变化的构成模型评估煤柱的强度劣化情况
本研究利用霍克-布朗应变软化模型建立了煤柱随时间变化的构成模型,该模型有助于研究煤柱强度随时间变化的情况。利用维特班克煤田 32 个不同年代煤柱的失败案例数据库,通过回溯分析推导出煤层的强度参数。采用三维有限差分法(FDM)对失效案例进行模拟。模拟结果显示了煤柱强度和煤柱随时间变化的 FOS。根据模拟结果,当 FOS 几乎等于 1 时,支柱的寿命被认为是合适的:\(m_{i} = 1.47\) and \(s_{i} = 0.01\); 剩余参数:\(m_{r} = 0.125\) and\(s_{r} = 0.00001\); 强度降低参数:\(\α = 0.04\),\(\beta = 200\) for a coal mass.为验证强度参数,考虑了来自同一煤田(Witbank)的 39 个稳定案例。所有稳定案例的模拟结果均显示为 FOS > 1。 所提出的构成模型适用于评估煤柱随时间变化的强度劣化和蠕变行为。据观察,支柱的劣化/屈服从表皮/侧面开始,随着时间的推移向支柱核心的纵深延伸,最终形成沙漏状。此外,还观察到支柱的 FOS 随时间推移而减小。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Mechanics of Time-Dependent Materials
Mechanics of Time-Dependent Materials 工程技术-材料科学:表征与测试
CiteScore
4.90
自引率
8.00%
发文量
47
审稿时长
>12 weeks
期刊介绍: Mechanics of Time-Dependent Materials accepts contributions dealing with the time-dependent mechanical properties of solid polymers, metals, ceramics, concrete, wood, or their composites. It is recognized that certain materials can be in the melt state as function of temperature and/or pressure. Contributions concerned with fundamental issues relating to processing and melt-to-solid transition behaviour are welcome, as are contributions addressing time-dependent failure and fracture phenomena. Manuscripts addressing environmental issues will be considered if they relate to time-dependent mechanical properties. The journal promotes the transfer of knowledge between various disciplines that deal with the properties of time-dependent solid materials but approach these from different angles. Among these disciplines are: Mechanical Engineering, Aerospace Engineering, Chemical Engineering, Rheology, Materials Science, Polymer Physics, Design, and others.
期刊最新文献
Analysis of solid lubricating materials microstructures properties in the frame of cylindrical coordinates system and reduced micromorphic model Quadratic regression model for response surface methodology based on sensitivity analysis of heat transport in mono nanofluids with suction and dual stretching in a rectangular frame Thermomechanical characterisation and plane stress linear viscoelastic modelling of ethylene-tetra-fluoroethylene foils Finite element modelling of ultrasonic assisted hot pressing of metal powder Implementation of finite element scheme to study thermal and mass transportation in water-based nanofluid model under quadratic thermal radiation in a disk
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1