{"title":"Effects of Nitrogen Doping on Microstructures and Irradiation Resistance of Ti–Zr–Nb–V–Mo Refractory High-Entropy Alloy","authors":"Huanzhi Zhang, Tianxin Li, Qianqian Wang, Zhenbo Zhu, Hefei Huang, Yiping Lu","doi":"10.1007/s40195-024-01686-0","DOIUrl":null,"url":null,"abstract":"<div><p>Interstitial strengthening with nitrogen (N) is one of the effective ways to improve the mechanical properties of HEAs, but the effects of N on the microstructures and mechanical properties of the irradiated HEAs have not been studied extensively. Here, the microstructures and mechanical properties of N-free and N-doped Ti<sub>2</sub>ZrNbV<sub>0.5</sub>Mo<sub>0.2</sub> HEAs before and after He irradiation were investigated. The results showed that the solid solution strengthening caused by interstitial N improved the yield strength at room temperature and 1023 K without significantly reducing plasticity. N doping significantly promoted the growth, aggregation and wider spatial distribution of He bubbles by enhancing the mobility of He atoms/He-vacancy complexes, with the average size of He bubbles increasing from 10.4 nm in N-free HEA to 31.0 nm in N-doped HEA. In addition, N-doped HEA showed a much higher irradiation hardness increment and hardening fraction than N-free HEA. Contrary to conventional materials doped with N, the introduction of N into Ti<sub>2</sub>ZrNbV<sub>0.5</sub>Mo<sub>0.2</sub> HEA had adverse effects on its resistance to He bubble growth and irradiation hardening. The results of this study indicated that N doping may not improve the irradiation resistance of HEAs.</p></div>","PeriodicalId":457,"journal":{"name":"Acta Metallurgica Sinica-English Letters","volume":null,"pages":null},"PeriodicalIF":2.9000,"publicationDate":"2024-04-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Metallurgica Sinica-English Letters","FirstCategoryId":"1","ListUrlMain":"https://link.springer.com/article/10.1007/s40195-024-01686-0","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0
Abstract
Interstitial strengthening with nitrogen (N) is one of the effective ways to improve the mechanical properties of HEAs, but the effects of N on the microstructures and mechanical properties of the irradiated HEAs have not been studied extensively. Here, the microstructures and mechanical properties of N-free and N-doped Ti2ZrNbV0.5Mo0.2 HEAs before and after He irradiation were investigated. The results showed that the solid solution strengthening caused by interstitial N improved the yield strength at room temperature and 1023 K without significantly reducing plasticity. N doping significantly promoted the growth, aggregation and wider spatial distribution of He bubbles by enhancing the mobility of He atoms/He-vacancy complexes, with the average size of He bubbles increasing from 10.4 nm in N-free HEA to 31.0 nm in N-doped HEA. In addition, N-doped HEA showed a much higher irradiation hardness increment and hardening fraction than N-free HEA. Contrary to conventional materials doped with N, the introduction of N into Ti2ZrNbV0.5Mo0.2 HEA had adverse effects on its resistance to He bubble growth and irradiation hardening. The results of this study indicated that N doping may not improve the irradiation resistance of HEAs.
用氮(N)进行间隙强化是改善 HEA 力学性能的有效方法之一,但氮对辐照 HEA 的微观结构和力学性能的影响尚未得到广泛研究。本文研究了无 N 和 N 掺杂 Ti2ZrNbV0.5Mo0.2 HEA 在 He 辐照前后的微观结构和力学性能。结果表明,间隙 N 引起的固溶强化提高了室温和 1023 K 时的屈服强度,而塑性并没有显著降低。通过提高 He 原子/He 空位复合物的迁移率,掺杂 N 显著促进了 He 气泡的生长、聚集和更广泛的空间分布,He 气泡的平均尺寸从无 N HEA 的 10.4 nm 增加到 N 掺杂 HEA 的 31.0 nm。此外,与不含 N 的 HEA 相比,掺 N 的 HEA 显示出更高的辐照硬度增量和硬化分数。与掺杂 N 的传统材料相反,在 Ti2ZrNbV0.5Mo0.2 HEA 中引入 N 会对其抗 He 气泡生长和辐照硬化产生不利影响。这项研究的结果表明,掺入 N 并不能提高 HEA 的抗辐照性能。
期刊介绍:
This international journal presents compact reports of significant, original and timely research reflecting progress in metallurgy, materials science and engineering, including materials physics, physical metallurgy, and process metallurgy.