Effect of aging of Al–Mg–Si/rare earth alloys: Microstructure and hardness

Nicolas Macías, Maribel Amú, Yesid Aguilar, Edgar Franco
{"title":"Effect of aging of Al–Mg–Si/rare earth alloys: Microstructure and hardness","authors":"Nicolas Macías, Maribel Amú, Yesid Aguilar, Edgar Franco","doi":"10.1556/1848.2024.00744","DOIUrl":null,"url":null,"abstract":"Thermomechanical treatments and variations in chemical composition during the production of these alloys allow their properties to be adjusted as necessary. In the present research, the influence of chemical modification was analyzed by adding a combination of two rare earth elements (lanthanum and cerium) and performing a pretreatment before natural and artificial aging. With this, it was observed that said chemical modification led to an increase in hardness after artificial aging and specific suppression of the hardening speed at room temperature, combined with a pretreatment process to improve the density of the nucleation site and take advantage of the possible vacancy capture effect. Furthermore, microstructural changes were observed in the study alloys by scanning electron microscopy. The above allows the design of alloy production processes according to the requirements of each application.","PeriodicalId":37508,"journal":{"name":"International Review of Applied Sciences and Engineering","volume":"31 15","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Review of Applied Sciences and Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1556/1848.2024.00744","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0

Abstract

Thermomechanical treatments and variations in chemical composition during the production of these alloys allow their properties to be adjusted as necessary. In the present research, the influence of chemical modification was analyzed by adding a combination of two rare earth elements (lanthanum and cerium) and performing a pretreatment before natural and artificial aging. With this, it was observed that said chemical modification led to an increase in hardness after artificial aging and specific suppression of the hardening speed at room temperature, combined with a pretreatment process to improve the density of the nucleation site and take advantage of the possible vacancy capture effect. Furthermore, microstructural changes were observed in the study alloys by scanning electron microscopy. The above allows the design of alloy production processes according to the requirements of each application.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
铝镁硅稀土合金的时效效应:显微结构和硬度
在这些合金的生产过程中,通过热机械处理和化学成分的变化,可以对其性能进行必要的调整。在本研究中,通过添加两种稀土元素(镧和铈)的组合,并在自然老化和人工老化前进行预处理,分析了化学改性的影响。结果表明,上述化学改性可提高人工老化后的硬度,并抑制室温下的硬化速度,同时通过预处理过程提高成核点的密度并利用可能的空位捕获效应。此外,还通过扫描电子显微镜观察了研究合金的微观结构变化。通过上述研究,可以根据不同应用的要求设计合金生产工艺。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
International Review of Applied Sciences and Engineering
International Review of Applied Sciences and Engineering Materials Science-Materials Science (miscellaneous)
CiteScore
2.30
自引率
0.00%
发文量
27
审稿时长
46 weeks
期刊介绍: International Review of Applied Sciences and Engineering is a peer reviewed journal. It offers a comprehensive range of articles on all aspects of engineering and applied sciences. It provides an international and interdisciplinary platform for the exchange of ideas between engineers, researchers and scholars within the academy and industry. It covers a wide range of application areas including architecture, building services and energetics, civil engineering, electrical engineering and mechatronics, environmental engineering, mechanical engineering, material sciences, applied informatics and management sciences. The aim of the Journal is to provide a location for reporting original research results having international focus with multidisciplinary content. The published papers provide solely new basic information for designers, scholars and developers working in the mentioned fields. The papers reflect the broad categories of interest in: optimisation, simulation, modelling, control techniques, monitoring, and development of new analysis methods, equipment and system conception.
期刊最新文献
Robust energy management system for electric vehicle BIM based collision tracking at the intersections of different building engineering systems at the design stage Possibility assessment for using protective coatings and polymer materials on tubing to prevent inorganic scaling on the inner surface of pipes Waste management and plastic waste recycling in Japan, China, Singapore and South Korea – What trends can be observed under different regulations Effect of aging of Al–Mg–Si/rare earth alloys: Microstructure and hardness
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1