Enhanced photoluminescence and structural properties of Zn-doped anatase TiO2 nanoparticles

IF 1.8 4区 材料科学 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY Materials Research Express Pub Date : 2024-07-16 DOI:10.1088/2053-1591/ad59ee
Moges Tsega Yihunie
{"title":"Enhanced photoluminescence and structural properties of Zn-doped anatase TiO2 nanoparticles","authors":"Moges Tsega Yihunie","doi":"10.1088/2053-1591/ad59ee","DOIUrl":null,"url":null,"abstract":"Undoped and zinc-doped TiO2 nanoparticles (NPs) were synthesized by the sol–gel method. The XRD spectra revealed that both synthesized undoped and Zn-doped TiO2 NPs remain in the anatase phase after calcined at 500 °C. The crystallite size was increased from 17 to 52 nm as the Zn content was increased from 0 to 0.2 mol%, which implies also a decrease of the micro-strain and surface area. The agglomerated spherical-like morphology with a diameter of roughly 10–20 nm was shown by SEM and TEM micrographs. The bandgap values were found to be decreased from 3.2 to 3.0 eV when Zn concentration increased from 0 to 0.2 mol%. A reduction in bandgap with an increase in dopant concentration may due to the increased in crystallite size along with enhanced lattice parameters (i.e., a and c) and d-spacing. From PL spectra, all samples exhibited a broad emission band in the visible region of about 400–500 nm centered at 430 nm. The highest PL emission was obtained for 0.2 mol% Zn doping. The broad PL emission over the visible range is greatly reduced at 0.4 mol% Zn due to concentration quenching. It is suggested that the Zn2+ doping induced oxygen vacancies which could promote the photoluminescence processes.","PeriodicalId":18530,"journal":{"name":"Materials Research Express","volume":null,"pages":null},"PeriodicalIF":1.8000,"publicationDate":"2024-07-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materials Research Express","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1088/2053-1591/ad59ee","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

Undoped and zinc-doped TiO2 nanoparticles (NPs) were synthesized by the sol–gel method. The XRD spectra revealed that both synthesized undoped and Zn-doped TiO2 NPs remain in the anatase phase after calcined at 500 °C. The crystallite size was increased from 17 to 52 nm as the Zn content was increased from 0 to 0.2 mol%, which implies also a decrease of the micro-strain and surface area. The agglomerated spherical-like morphology with a diameter of roughly 10–20 nm was shown by SEM and TEM micrographs. The bandgap values were found to be decreased from 3.2 to 3.0 eV when Zn concentration increased from 0 to 0.2 mol%. A reduction in bandgap with an increase in dopant concentration may due to the increased in crystallite size along with enhanced lattice parameters (i.e., a and c) and d-spacing. From PL spectra, all samples exhibited a broad emission band in the visible region of about 400–500 nm centered at 430 nm. The highest PL emission was obtained for 0.2 mol% Zn doping. The broad PL emission over the visible range is greatly reduced at 0.4 mol% Zn due to concentration quenching. It is suggested that the Zn2+ doping induced oxygen vacancies which could promote the photoluminescence processes.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
掺锌锐钛矿二氧化钛纳米粒子的增强光致发光和结构特性
采用溶胶-凝胶法合成了未掺杂和掺锌的二氧化钛纳米粒子(NPs)。XRD 图谱显示,合成的未掺杂和掺锌 TiO2 NPs 在 500 ℃ 煅烧后均保持锐钛矿相。随着 Zn 含量从 0 mol% 增加到 0.2 mol%,结晶尺寸从 17 nm 增加到 52 nm,这也意味着微应变和表面积的减小。SEM 和 TEM 显微照片显示了直径约为 10-20 nm 的团聚球状形态。当锌浓度从 0 摩尔%增加到 0.2 摩尔%时,带隙值从 3.2 eV 下降到 3.0 eV。带隙随着掺杂剂浓度的增加而减小,这可能是由于晶粒尺寸增大以及晶格参数(即 a 和 c)和 d 间距增大所致。从聚光光谱来看,所有样品都在可见光区域(约 400-500 纳米)显示出以 430 纳米为中心的宽发射带。掺杂 0.2 摩尔% Zn 的样品的 PL 发射率最高。当 Zn 的掺杂量为 0.4 摩尔%时,由于浓度淬灭作用,可见光范围内宽泛的 PL 发射大大减弱。这表明 Zn2+ 的掺杂诱导了氧空位,从而促进了光致发光过程。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Materials Research Express
Materials Research Express MATERIALS SCIENCE, MULTIDISCIPLINARY-
CiteScore
4.50
自引率
4.30%
发文量
640
审稿时长
12 weeks
期刊介绍: A broad, rapid peer-review journal publishing new experimental and theoretical research on the design, fabrication, properties and applications of all classes of materials.
期刊最新文献
Effect of scanning speeds on microstructure evolution and properties of 70Cr8Ni2Y coatings by direct laser deposition A simple green synthesis of carbon quantum dots from Prunus Armeniaca and their application as fluorescent probes for the selective and sensitive detection of Cd2+ metal ion Growth, magnetic, and electronic properties of Ni-Zn ferrites thin films Effect of Y content on microstructure evolution and tensile properties of Mg-8Li-3Al-2Sn-xY alloys Effect of x-ray irradiation on magnetocaloric materials, (MnNiSi)1-x(Fe2Ge)x and LaFe13-x-yMnxSiyHz
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1