Optimized microbial fuel cell-powered electro-Fenton processes to enhance electricity and bisphenol A removal by varying external resistance and electrolyte concentrations

Abstract

This study is the first to investigate the effects of external resistance and electrolyte concentration on the performance of a bioelectro-Fenton (BEF) system, involving measurements of power density, H₂O₂ generation, and bisphenol A (BPA) removal efficiency. With optimized operating conditions (external resistance of 1.12 kΩ and cathodic NaCl concentration of 1,657 mg/L), the BEF system achieved a maximum power density of 38.59 mW/m², which is about 3.5 times higher than with 1 kΩ external resistance and no NaCl. This system featured a 71.7 % reduction in total internal resistance. The optimized BEF also accelerated the oxygen reduction reaction rate, increasing H₂O₂ generation by 4.4 times compared to the unoptimized system. Moreover, it exhibited superior BPA degradation performance, removing over 99 % of BPA within 14 hs, representing a 1.1 to 3.3-fold improvement over the unoptimized BEF. By the fifth cycle (70 h), the optimized BEF still removed 70 % of BPA. Optimizing the operating conditions significantly increased the abundance of electrochemically active bacteria (Pseudomonadaceae) from 2.2 % to 20 %, facilitating rapid acclimation. The study demonstrates the strong potential of an optimized BEF system for removing persistent pollutants.