V. Yu. Goltsev, A. V. Osintsev, A. S. Plotnikov, V. I. Polskij
{"title":"Diametral Compression of Short Cylinders with a Central Hole as a Method for Assessing the Tensile Strength of Brittle Materials","authors":"V. Yu. Goltsev, A. V. Osintsev, A. S. Plotnikov, V. I. Polskij","doi":"10.1134/s0020168524700201","DOIUrl":null,"url":null,"abstract":"<h3 data-test=\"abstract-sub-heading\">Abstract</h3><p>The possibility of assessing the fracture resistance of brittle materials by testing short cylinders, solid and with a central hole, under diametral compression has been investigated. The computational analysis was performed using the finite element method with the ANSYS program. It was shown that the stress distribution in a disk with a hole is similar to that in a disk without a hole, but it has disturbances caused by the stress concentrator in the form of the hole. The normalized values of the maximum principal stresses for a disk with a hole are more than 5 times higher than those for a disk without a hole. Experimental analysis was carried out by testing short cylinders made of brittle materials—cast iron and graphite—both solid and with a central hole. It was found that the fracture resistance determined by the formula of the ASTM D3967-95a standard is practically the same for solid cast iron specimens, while for graphite specimens it differs by 1.5 times from the true fracture resistance of the materials. When testing specimens of cast iron and graphite with a central hole, the fracture resistance differs from the standard by 1.5 and almost 2.5 times, respectively. The different nature of specimen failure was also noted—slow controlled fracture for cast iron and dynamic fracture for graphite, according to their respective deformation diagrams. As an example, the results of testing real cylindrical specimens with a central hole—uranium dioxide fuel pellets—are presented. It is shown that the results of testing graphite ARV-1 specimens and fuel pellets are in good agreement. Thus, the possibility of testing small short cylinders using the diametral compression scheme for indirect assessment of tensile strength of brittle materials is confirmed. A calculation equation is proposed for the indirect assessment of the tensile strength of brittle materials based on the results of testing small short cylinders with and without a central hole under diametral compression.</p>","PeriodicalId":585,"journal":{"name":"Inorganic Materials","volume":"202 1","pages":""},"PeriodicalIF":0.9000,"publicationDate":"2024-07-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Inorganic Materials","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1134/s0020168524700201","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0
Abstract
The possibility of assessing the fracture resistance of brittle materials by testing short cylinders, solid and with a central hole, under diametral compression has been investigated. The computational analysis was performed using the finite element method with the ANSYS program. It was shown that the stress distribution in a disk with a hole is similar to that in a disk without a hole, but it has disturbances caused by the stress concentrator in the form of the hole. The normalized values of the maximum principal stresses for a disk with a hole are more than 5 times higher than those for a disk without a hole. Experimental analysis was carried out by testing short cylinders made of brittle materials—cast iron and graphite—both solid and with a central hole. It was found that the fracture resistance determined by the formula of the ASTM D3967-95a standard is practically the same for solid cast iron specimens, while for graphite specimens it differs by 1.5 times from the true fracture resistance of the materials. When testing specimens of cast iron and graphite with a central hole, the fracture resistance differs from the standard by 1.5 and almost 2.5 times, respectively. The different nature of specimen failure was also noted—slow controlled fracture for cast iron and dynamic fracture for graphite, according to their respective deformation diagrams. As an example, the results of testing real cylindrical specimens with a central hole—uranium dioxide fuel pellets—are presented. It is shown that the results of testing graphite ARV-1 specimens and fuel pellets are in good agreement. Thus, the possibility of testing small short cylinders using the diametral compression scheme for indirect assessment of tensile strength of brittle materials is confirmed. A calculation equation is proposed for the indirect assessment of the tensile strength of brittle materials based on the results of testing small short cylinders with and without a central hole under diametral compression.
期刊介绍：
Inorganic Materials is a journal that publishes reviews and original articles devoted to chemistry, physics, and applications of various inorganic materials including high-purity substances and materials. The journal discusses phase equilibria, including P–T–X diagrams, and the fundamentals of inorganic materials science, which determines preparatory conditions for compounds of various compositions with specified deviations from stoichiometry. Inorganic Materials is a multidisciplinary journal covering all classes of inorganic materials. The journal welcomes manuscripts from all countries in the English or Russian language.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
