Microstructure and Mechanical Properties of a New Al0.5CrFeMnCo2 High Entropy Alloy

IF 1.6 4区 材料科学 Q2 Materials Science Transactions of The Indian Institute of Metals Pub Date : 2024-08-08 DOI:10.1007/s12666-024-03438-1
Yang Zhang, Yang Shen, Xiaoyang Chen, Shunping Sun, Mengqi Cong, Yanlei Li
{"title":"Microstructure and Mechanical Properties of a New Al0.5CrFeMnCo2 High Entropy Alloy","authors":"Yang Zhang, Yang Shen, Xiaoyang Chen, Shunping Sun, Mengqi Cong, Yanlei Li","doi":"10.1007/s12666-024-03438-1","DOIUrl":null,"url":null,"abstract":"<p>In this study, a new Al<sub>0.5</sub>CrFeMnCo<sub>2</sub> (molar ratio) high entropy alloy was designed. The microstructure and mechanical properties of as-cast and annealed Al<sub>0.5</sub>CrFeMnCo<sub>2</sub> high entropy alloy were investigated. FCC+BCC duplex-phase structure is formed in as-cast Al<sub>0.5</sub>CrFeMnCo<sub>2</sub> high entropy alloy. Dendritic FCC phase is the predominant constituent phase, and BCC/B2 coherent structure is formed in the inter-dendritic BCC phase. A large number of short-rod small-sized BCC phases are precipitated within FCC dendrites after annealing at 1000 °C for 6 h but unobserved after annealing at 1100 °C and 1200 °C for 6 h. The as-cast Al<sub>0.5</sub>CrFeMnCo<sub>2</sub> high entropy alloy exhibits favorable comprehensive mechanical properties, with a compressive fracture strength of 1493 MPa and a plastic strain of 28.3%. After annealing at 1000 °C for 6 h, the compressive fracture strength and plastic strain reached are improved to 1676 MPa and 32.6%, respectively. However, further increase in annealing temperature results in gradual decrease in mechanical properties.</p>","PeriodicalId":23224,"journal":{"name":"Transactions of The Indian Institute of Metals","volume":"39 1","pages":""},"PeriodicalIF":1.6000,"publicationDate":"2024-08-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Transactions of The Indian Institute of Metals","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s12666-024-03438-1","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Materials Science","Score":null,"Total":0}
引用次数: 0

Abstract

In this study, a new Al0.5CrFeMnCo2 (molar ratio) high entropy alloy was designed. The microstructure and mechanical properties of as-cast and annealed Al0.5CrFeMnCo2 high entropy alloy were investigated. FCC+BCC duplex-phase structure is formed in as-cast Al0.5CrFeMnCo2 high entropy alloy. Dendritic FCC phase is the predominant constituent phase, and BCC/B2 coherent structure is formed in the inter-dendritic BCC phase. A large number of short-rod small-sized BCC phases are precipitated within FCC dendrites after annealing at 1000 °C for 6 h but unobserved after annealing at 1100 °C and 1200 °C for 6 h. The as-cast Al0.5CrFeMnCo2 high entropy alloy exhibits favorable comprehensive mechanical properties, with a compressive fracture strength of 1493 MPa and a plastic strain of 28.3%. After annealing at 1000 °C for 6 h, the compressive fracture strength and plastic strain reached are improved to 1676 MPa and 32.6%, respectively. However, further increase in annealing temperature results in gradual decrease in mechanical properties.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
新型 Al0.5CrFeMnCo2 高熵合金的显微结构和力学性能
本研究设计了一种新型 Al0.5CrFeMnCo2(摩尔比)高熵合金。研究了铸造和退火 Al0.5CrFeMnCo2 高熵合金的微观结构和力学性能。在铸造的 Al0.5CrFeMnCo2 高熵合金中形成了 FCC+BCC 双相结构。树枝状 FCC 相是主要的组成相,树枝状 BCC 相间形成 BCC/B2 相干结构。在 1000 ℃ 退火 6 小时后,FCC 树枝状相中析出了大量短棒小尺寸 BCC 相,但在 1100 ℃ 和 1200 ℃ 退火 6 小时后未观察到这种现象。在 1000 °C 下退火 6 小时后,抗压断裂强度和塑性应变分别提高到 1676 兆帕和 32.6%。然而,进一步提高退火温度会导致机械性能逐渐下降。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Transactions of The Indian Institute of Metals
Transactions of The Indian Institute of Metals Materials Science-Metals and Alloys
CiteScore
2.60
自引率
6.20%
发文量
3
期刊介绍: Transactions of the Indian Institute of Metals publishes original research articles and reviews on ferrous and non-ferrous process metallurgy, structural and functional materials development, physical, chemical and mechanical metallurgy, welding science and technology, metal forming, particulate technologies, surface engineering, characterization of materials, thermodynamics and kinetics, materials modelling and other allied branches of Metallurgy and Materials Engineering. Transactions of the Indian Institute of Metals also serves as a forum for rapid publication of recent advances in all the branches of Metallurgy and Materials Engineering. The technical content of the journal is scrutinized by the Editorial Board composed of experts from various disciplines of Metallurgy and Materials Engineering. Editorial Advisory Board provides valuable advice on technical matters related to the publication of Transactions.
期刊最新文献
Effect of Impact Energy on the Interface Microstructure of Explosively Clad Mild Steel and Titanium Surface Characteristics of Low Plasticity Burnished Laser Directed Energy Deposition Alloy IN718 Enhancement of Elastic Modulus by TiC Reinforcement in Low-Density Steel Microstructure Evolution and Mechanical Properties of NiAl-TiB2 Nanocomposite Produced by Heat Treatment Post Mechanical Alloying Effect of Boron and its Influence on Mechanically Alloyed FeCo Nanocrystals
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1