Microwave-assisted alkaline fusion followed by water-leaching for the selective extraction of the refractory metals tungsten, niobium and tantalum from low-grade ores and tailings

Abstract

The refractory metals tungsten, tantalum and niobium are considered critical raw materials in Europe. Diversifying the supply of such materials, for instance by recovering refractory metals from local low-grade ore materials could reduce their supply risks. However, the extraction processes require to be efficient with a low energy and material consumption and a minimal environmental impact. In this work, microwave (MW) assisted alkaline fusion was explored to extract tungsten from scheelite containing ore materials with different grades (high to very low) and tantalum and niobium from a columbite-tantalite [(Fe,Mn)(Nb,Ta)₂O₆] concentrate. During the fusion process scheelite was converted into soluble alkali tungstate salts [Na₂WO₄, K₂WO₄ and/or K₃Na(WO₄)₂] and the reaction temperature could be lowered to 150–200 °C by fusion with a low-melting eutectic alkali salt system of an 1:1 (m/m) NaOH:KOH mixture. The application of MW-assisted heating allowed for fast and volumetric heating, thereby lowering reaction times to 10 min – 30 min. After fusion, tungsten was extracted by a simple water leaching step leading to extraction efficiencies ranging from 77 % to 97 %. Noteworthily, also P, S and As, which all form soluble oxyanions were extracted from the studied materials. Extraction of niobium and tantalum was also achieved though MW-assisted alkaline fusion as an alternative to acidic fluorine-based hydrometallurgical processes. MW-assisted heating allowed for a fast conversion of the (Fe,Mn)(Nb,Ta)₂O₆ into alkali tantalate and niobate salts. Under optimal conditions, MW-assisted fusion with KOH (salt:sample = 3:1 (m/m)) at 400 °C for 10 min leached ca. 74 %–88 % of tantalum and 77 %–86 % of niobium into water (L/S=10) at 40 °C for 120 min, while the main matrix elements Mn and Fe displayed limited dissolution (<4%). Due to the low solubility of sodium tantalate and niobate salts in water, MW-assisted alkaline fusion in an eutectic NaOH:KOH mixture followed by water leaching was not efficient.