Epoxy composite dust reinforced novel polypropylene composites: An eco‐friendly approach toward sustainable resource management

Abstract

This study presents an innovative technique for recycling leftover epoxy composites reinforced with natural fillers. The waste epoxy composites were successfully ground into a 75–150 μm fine powder. With the aid of extrusion injection molding, this powder was subsequently utilized to create polypropylene matrix‐based polymer composites with variable filler loadings ranging from 10% to 30%. The mechanical, thermal, thermomechanical, and morphological properties of the developed composites were assessed. The greatest tensile strength of the polypropylene composites produced with 10% filler loading was found to be 24.15 MPa. The addition of epoxy composite filler increased the thermal stability. During morphological investigations, it was discovered that pits, voids, and filler agglomerations predominated the fractured surface of the developed composites. Overall, it can be concluded that there is a lot of promise for value‐added recycling of thermosetting resin‐based composites using this low‐cost, high‐efficiency, and ecologically benign process, which would lessen the environmental impact of plastic.Highlights Novel polypropylene composites using epoxy composite dust was developed. Mechanical, thermal, thermomechanical, and morphological studies were performed. Toys, tableware, mementos, and furniture can be the potential applications. The developed composites can reduce plastic load on the environment.