Study on mechanical properties of a roadbed rehabilitation polyurethane grouting material after freeze–thaw cycles

IF 3.2 4区 工程技术 Q2 ENGINEERING, CHEMICAL Polymer Engineering and Science Pub Date : 2024-09-13 DOI:10.1002/pen.26946
Zixuan Wang, Mingrui Du, Hongyuan Fang, Chao Zhang, Peng Zhao, Xupei Yao, Feng Xiao
{"title":"Study on mechanical properties of a roadbed rehabilitation polyurethane grouting material after freeze–thaw cycles","authors":"Zixuan Wang, Mingrui Du, Hongyuan Fang, Chao Zhang, Peng Zhao, Xupei Yao, Feng Xiao","doi":"10.1002/pen.26946","DOIUrl":null,"url":null,"abstract":"<jats:label/>The mechanical properties of roadbed rehabilitation polyurethane grouting material (RhPU) under freeze–thaw cycles are the theoretical basis for evaluating its long‐term performance in cold regions, but are currently not well understood. Freeze–thaw cycle tests were conducted on RhPU grouting materials of different densities using a rapid freezing method to investigate the effects of damage characteristics of RhPU. The experimental results indicate that the frost damage of RhPU is a fatigue failure process from the outside to the inside. During the freeze–thaw cycle, water‐filled cells experience compression damage due to freezing expansion and interconnected, forming more water seepage channels, accelerating the internal damage of RhPU. Therefore, the dynamic elastic modulus, longitudinal wave velocity, rigidity, and compressive strength of RhPU all decrease with an increase in freeze–thaw cycles. Moreover, at the same freeze–thaw cycles, the lower the density of RhPU, the greater the loss rate of the dynamic elastic modulus, longitudinal wave velocity, rigidity, and compressive strength. The square of the longitudinal wave velocity of RhPU samples before and after freeze–thaw cycles correlates well with density, and the longitudinal wave velocity loss rate better quantifies the internal damage of RhPU samples. Through scanning electron microscopy, the microstructure of RhPU after freeze–thaw cycles was observed, revealing that the lower density of RhPU exhibits more severe freeze–thaw damage compared to higher density RhPU, attributed to its larger cell diameter and greater contact area between adjacent cells. This indicates poorer freeze resistance performance for low‐density RhPU.Highlights<jats:list list-type=\"bullet\"> <jats:list-item>The variations of surface damage of RhPU after freeze–thaw cycles were studied.</jats:list-item> <jats:list-item>The correlation between and density of RhPU after freeze–thaw cycles was found.</jats:list-item> <jats:list-item>The effect of freeze–thaw cycles on mechanical properties of RhPU was analyzed.</jats:list-item> <jats:list-item>The microscale freeze–thaw damage mechanism of RhPU was revealed.</jats:list-item> </jats:list>","PeriodicalId":20281,"journal":{"name":"Polymer Engineering and Science","volume":"15 1","pages":""},"PeriodicalIF":3.2000,"publicationDate":"2024-09-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Polymer Engineering and Science","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1002/pen.26946","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

Abstract

The mechanical properties of roadbed rehabilitation polyurethane grouting material (RhPU) under freeze–thaw cycles are the theoretical basis for evaluating its long‐term performance in cold regions, but are currently not well understood. Freeze–thaw cycle tests were conducted on RhPU grouting materials of different densities using a rapid freezing method to investigate the effects of damage characteristics of RhPU. The experimental results indicate that the frost damage of RhPU is a fatigue failure process from the outside to the inside. During the freeze–thaw cycle, water‐filled cells experience compression damage due to freezing expansion and interconnected, forming more water seepage channels, accelerating the internal damage of RhPU. Therefore, the dynamic elastic modulus, longitudinal wave velocity, rigidity, and compressive strength of RhPU all decrease with an increase in freeze–thaw cycles. Moreover, at the same freeze–thaw cycles, the lower the density of RhPU, the greater the loss rate of the dynamic elastic modulus, longitudinal wave velocity, rigidity, and compressive strength. The square of the longitudinal wave velocity of RhPU samples before and after freeze–thaw cycles correlates well with density, and the longitudinal wave velocity loss rate better quantifies the internal damage of RhPU samples. Through scanning electron microscopy, the microstructure of RhPU after freeze–thaw cycles was observed, revealing that the lower density of RhPU exhibits more severe freeze–thaw damage compared to higher density RhPU, attributed to its larger cell diameter and greater contact area between adjacent cells. This indicates poorer freeze resistance performance for low‐density RhPU.Highlights The variations of surface damage of RhPU after freeze–thaw cycles were studied. The correlation between and density of RhPU after freeze–thaw cycles was found. The effect of freeze–thaw cycles on mechanical properties of RhPU was analyzed. The microscale freeze–thaw damage mechanism of RhPU was revealed.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
路基修复聚氨酯灌浆材料冻融循环后的力学性能研究
路基修复聚氨酯灌浆材料(RhPU)在冻融循环下的力学性能是评估其在寒冷地区长期性能的理论依据,但目前对其了解不多。采用快速冻结法对不同密度的 RhPU 灌浆材料进行了冻融循环试验,以研究 RhPU 的破坏特征对其性能的影响。实验结果表明,RhPU 的冻害是一个由外向内的疲劳破坏过程。在冻融循环过程中,充满水的单元格因冻胀而发生压缩破坏,并相互连接,形成更多的渗水通道,加速了 RhPU 的内部破坏。因此,随着冻融循环次数的增加,RhPU 的动态弹性模量、纵波速度、刚度和抗压强度都会降低。此外,在相同的冻融循环下,RhPU 的密度越低,其动态弹性模量、纵波速度、刚度和抗压强度的损失率就越大。冻融循环前后 RhPU 样品纵波速度的平方与密度有很好的相关性,纵波速度损失率能更好地量化 RhPU 样品的内部损伤。通过扫描电子显微镜观察冻融循环后 RhPU 的微观结构,发现与高密度 RhPU 相比,低密度 RhPU 的冻融损伤更严重,这是因为其细胞直径更大,相邻细胞之间的接触面积更大。要点 研究了冻融循环后 RhPU 表面损伤的变化。发现了冻融循环后 RhPU 表面损伤与密度之间的相关性。分析了冻融循环对 RhPU 力学性能的影响。揭示了 RhPU 的微观冻融损伤机理。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Polymer Engineering and Science
Polymer Engineering and Science 工程技术-高分子科学
CiteScore
5.40
自引率
18.80%
发文量
329
审稿时长
3.7 months
期刊介绍: For more than 30 years, Polymer Engineering & Science has been one of the most highly regarded journals in the field, serving as a forum for authors of treatises on the cutting edge of polymer science and technology. The importance of PE&S is underscored by the frequent rate at which its articles are cited, especially by other publications - literally thousand of times a year. Engineers, researchers, technicians, and academicians worldwide are looking to PE&S for the valuable information they need. There are special issues compiled by distinguished guest editors. These contain proceedings of symposia on such diverse topics as polyblends, mechanics of plastics and polymer welding.
期刊最新文献
Epoxy composite dust reinforced novel polypropylene composites: An eco‐friendly approach toward sustainable resource management Nanosilica reinforced epoxy under super high strain rate loading Study on mechanical properties of a roadbed rehabilitation polyurethane grouting material after freeze–thaw cycles Synchronously enhanced thermal conductivity and dielectric properties of silicone rubber composites filled with the AlN‐PPy‐KH570 multilayer core‐shell hybrid structure PLA/CB and HDPE/CB conductive polymer composites: Effect of polymer matrix structure on the rheological and electrical percolation threshold
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1