Grain boundary diffusion in additively manufactured CoCrFeMnNi high-entropy alloys: Impact of non-equilibrium state, temperature and relaxation

Abstract

Grain boundary diffusion of Ni in the equiatomic CoCrFeMnNi high-entropy alloy, produced by additive manufacturing, is measured using a radiotracer technique in an extended temperature interval of 350 to 703 K. A strongly non-monotonic temperature dependence of the Ni grain boundary diffusion coefficients (with a spectacular intermittent retardation of the diffusion rates with increasing temperature) is seen and explained by relaxation of a non-equilibrium state induced by rapid solidification during fabrication. The grain boundary excess energy of the non-equilibrium state of these grain boundaries, as estimated from the diffusion data, is found to be larger than 0.3 J/m${}^2$. This corresponds to an increase of about 30% of the interface energy compared to relaxed general high-angle grain boundaries. The temperature-induced evolution of the grain boundary state is analyzed in terms of the concomitant structure evolution, segregation, phase stability and precipitation in the multi-component alloy.