{"title":"Research on the dynamics of flame propagation and overpressure evolution in full-scale residential gas deflagration","authors":"","doi":"10.1016/j.csite.2024.105204","DOIUrl":null,"url":null,"abstract":"<div><div>To determine the effect of ignition height on indoor flame spread behavior and overpressure development, a comprehensive full-scale deflagration testing facility was established. Extensive experimental research was conducted within this facility. The findings indicate that indoor flame reignition and the occurrence of secondary explosions are most pronounced with intermediate ignition. Furthermore, the explosion overpressure generated during the reverse turn of shock wave propagation is greater than that produced by the forward turn. In comparison to the peak overpressure <em>P</em><sub>ext</sub> in the master bedroom for top, middle, and bottom ignition, the peak overpressure <em>P</em><sub>ext</sub> in the second bedroom increased by approximately 14.48 %, 15.04 %, and 19.20 %, respectively. When comparing middle ignition to top ignition, the propagation speed of shock waves in the kitchen balcony, restroom, second bedroom, and master bedroom was enhanced by 34.21 %, 40.85 %, 40.70 %, and 34.65 %, respectively. Furthermore, when comparing middle ignition to bottom ignition, the propagation speed of shock waves in these areas experienced a significant increase of 126.32 %, 124.39 %, 123.26 %, and 113.86 %, respectively. These research findings provide a theoretical foundation and empirical data to support the investigation and analysis of the causes of indoor gas explosion incidents.</div></div>","PeriodicalId":9658,"journal":{"name":"Case Studies in Thermal Engineering","volume":null,"pages":null},"PeriodicalIF":6.4000,"publicationDate":"2024-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Case Studies in Thermal Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2214157X24012358","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"THERMODYNAMICS","Score":null,"Total":0}
引用次数: 0
Abstract
To determine the effect of ignition height on indoor flame spread behavior and overpressure development, a comprehensive full-scale deflagration testing facility was established. Extensive experimental research was conducted within this facility. The findings indicate that indoor flame reignition and the occurrence of secondary explosions are most pronounced with intermediate ignition. Furthermore, the explosion overpressure generated during the reverse turn of shock wave propagation is greater than that produced by the forward turn. In comparison to the peak overpressure Pext in the master bedroom for top, middle, and bottom ignition, the peak overpressure Pext in the second bedroom increased by approximately 14.48 %, 15.04 %, and 19.20 %, respectively. When comparing middle ignition to top ignition, the propagation speed of shock waves in the kitchen balcony, restroom, second bedroom, and master bedroom was enhanced by 34.21 %, 40.85 %, 40.70 %, and 34.65 %, respectively. Furthermore, when comparing middle ignition to bottom ignition, the propagation speed of shock waves in these areas experienced a significant increase of 126.32 %, 124.39 %, 123.26 %, and 113.86 %, respectively. These research findings provide a theoretical foundation and empirical data to support the investigation and analysis of the causes of indoor gas explosion incidents.
期刊介绍:
Case Studies in Thermal Engineering provides a forum for the rapid publication of short, structured Case Studies in Thermal Engineering and related Short Communications. It provides an essential compendium of case studies for researchers and practitioners in the field of thermal engineering and others who are interested in aspects of thermal engineering cases that could affect other engineering processes. The journal not only publishes new and novel case studies, but also provides a forum for the publication of high quality descriptions of classic thermal engineering problems. The scope of the journal includes case studies of thermal engineering problems in components, devices and systems using existing experimental and numerical techniques in the areas of mechanical, aerospace, chemical, medical, thermal management for electronics, heat exchangers, regeneration, solar thermal energy, thermal storage, building energy conservation, and power generation. Case studies of thermal problems in other areas will also be considered.