New insights into the role of highly reactive pozzolans in the early hydration process of C3S and C3A monitored by conductometry, calorimetry, phase composition and microstructure analyses
{"title":"New insights into the role of highly reactive pozzolans in the early hydration process of C3S and C3A monitored by conductometry, calorimetry, phase composition and microstructure analyses","authors":"","doi":"10.1016/j.conbuildmat.2024.138950","DOIUrl":null,"url":null,"abstract":"<div><div>The presented research aimed at understanding the effect of a highly reactive pozzolan (HRP) on the early age hydration of alite (C<sub>3</sub>S) and tricalcium aluminate (C<sub>3</sub>A). Five supplementary cementitious materials of varying activity were used throughout the investigation. The hydration process was continuously monitored by examining the heat release rate of hydrating pastes (calorimetry) and the conductivity changes of alite and tricalcium aluminate hydrating suspensions (conductometry). Moreover, at specific time intervals, phase composition was analyzed using X-ray diffraction and thermal analysis, along with the liquid phase composition of hydrating suspensions (ICP-OES). The microstructure of hydration products was also observed using TEM and SEM. The results showed that the position of the ‘aluminate peak’ observed in the calorimetric curves is most likely the result of a synergy of two interactions: the effect of acceleration of C<sub>3</sub>S hydration process and the effect of HRP on the hydration of C<sub>3</sub>A. The lack of a linear relationship between the amount of heat released and the specific surface area indicated, that despite the significance of physical presence of SCMs, the chemical interactions within the system are more important. The C<sub>3</sub>A reaction is associated with the release of a large amount of heat. In a hydrating C<sub>3</sub>A system, the saturation of the solution with calcium hydroxide has a significant effect on the course of the reaction. During hydration in water, the degree of C<sub>3</sub>A reaction is greater in the presence of HRP, whereas when the system reacts in saturated calcium hydroxide, the degree of C<sub>3</sub>A reaction is lower. It seems that the factor accelerating the C<sub>3</sub>A hydration is the nucleation of products on the surface of HRP grains, leading to the formation of a larger amount of hydrated calcium sulfoaluminates, with simultaneous acceleration of C<sub>3</sub>A dissolution. In saturated Ca(OH)<sub>2</sub>, HRP promotes the formation of ettringite and, most importantly, affects its stability in the solution. Silicate ions originating from the HRP are likely incorporated into the crystallizing phases. In both environments, HRP affects the formation of hydrogarnets (C<sub>3</sub>AH<sub>6</sub>).</div></div>","PeriodicalId":288,"journal":{"name":"Construction and Building Materials","volume":null,"pages":null},"PeriodicalIF":7.4000,"publicationDate":"2024-11-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Construction and Building Materials","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0950061824040923","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CONSTRUCTION & BUILDING TECHNOLOGY","Score":null,"Total":0}
引用次数: 0
Abstract
The presented research aimed at understanding the effect of a highly reactive pozzolan (HRP) on the early age hydration of alite (C3S) and tricalcium aluminate (C3A). Five supplementary cementitious materials of varying activity were used throughout the investigation. The hydration process was continuously monitored by examining the heat release rate of hydrating pastes (calorimetry) and the conductivity changes of alite and tricalcium aluminate hydrating suspensions (conductometry). Moreover, at specific time intervals, phase composition was analyzed using X-ray diffraction and thermal analysis, along with the liquid phase composition of hydrating suspensions (ICP-OES). The microstructure of hydration products was also observed using TEM and SEM. The results showed that the position of the ‘aluminate peak’ observed in the calorimetric curves is most likely the result of a synergy of two interactions: the effect of acceleration of C3S hydration process and the effect of HRP on the hydration of C3A. The lack of a linear relationship between the amount of heat released and the specific surface area indicated, that despite the significance of physical presence of SCMs, the chemical interactions within the system are more important. The C3A reaction is associated with the release of a large amount of heat. In a hydrating C3A system, the saturation of the solution with calcium hydroxide has a significant effect on the course of the reaction. During hydration in water, the degree of C3A reaction is greater in the presence of HRP, whereas when the system reacts in saturated calcium hydroxide, the degree of C3A reaction is lower. It seems that the factor accelerating the C3A hydration is the nucleation of products on the surface of HRP grains, leading to the formation of a larger amount of hydrated calcium sulfoaluminates, with simultaneous acceleration of C3A dissolution. In saturated Ca(OH)2, HRP promotes the formation of ettringite and, most importantly, affects its stability in the solution. Silicate ions originating from the HRP are likely incorporated into the crystallizing phases. In both environments, HRP affects the formation of hydrogarnets (C3AH6).
期刊介绍:
Construction and Building Materials offers an international platform for sharing innovative and original research and development in the realm of construction and building materials, along with their practical applications in new projects and repair practices. The journal publishes a diverse array of pioneering research and application papers, detailing laboratory investigations and, to a limited extent, numerical analyses or reports on full-scale projects. Multi-part papers are discouraged.
Additionally, Construction and Building Materials features comprehensive case studies and insightful review articles that contribute to new insights in the field. Our focus is on papers related to construction materials, excluding those on structural engineering, geotechnics, and unbound highway layers. Covered materials and technologies encompass cement, concrete reinforcement, bricks and mortars, additives, corrosion technology, ceramics, timber, steel, polymers, glass fibers, recycled materials, bamboo, rammed earth, non-conventional building materials, bituminous materials, and applications in railway materials.