Wear mechanism and three-phase synergistic effect of self-mated SiC/Si/graphite composites in unlubricated sliding

IF 5.3 1区 工程技术 Q1 ENGINEERING, MECHANICAL Wear Pub Date : 2024-11-28 DOI:10.1016/j.wear.2024.205674
Haifeng Du , Zhibao Hou , Zhenrong Tang , Zhenqiang Yao
{"title":"Wear mechanism and three-phase synergistic effect of self-mated SiC/Si/graphite composites in unlubricated sliding","authors":"Haifeng Du ,&nbsp;Zhibao Hou ,&nbsp;Zhenrong Tang ,&nbsp;Zhenqiang Yao","doi":"10.1016/j.wear.2024.205674","DOIUrl":null,"url":null,"abstract":"<div><div>With the aim of applying SiC/Si/graphite composites as thrust-bearing pads and runners under conditions of dry friction start-stop cycles and a transient absence of lubrication, the tribological behaviors of self-mated SiC/Si/graphite composites were investigated using pin-on-disc tribology tests under various applied loads and sliding speeds without lubricants. The results show that the friction coefficient values range between 0.10 and 0.21, and the total specific wear rates of the discs and pins are below 9.5 × 10<sup>−6</sup> mm<sup>3</sup>/N·m. When the flash temperature is greater than 1500 °C, the main wear mechanism changes from two-body abrasive wear between SiC and graphite to oxidation wear of SiC and Si, three-body abrasive wear and adhesive wear of graphite and tribological film. The synergistic effects of Si, SiC, and graphite on wear reduction and tribological film formation were also elucidated.</div></div>","PeriodicalId":23970,"journal":{"name":"Wear","volume":"564 ","pages":"Article 205674"},"PeriodicalIF":5.3000,"publicationDate":"2024-11-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Wear","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0043164824004393","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

Abstract

With the aim of applying SiC/Si/graphite composites as thrust-bearing pads and runners under conditions of dry friction start-stop cycles and a transient absence of lubrication, the tribological behaviors of self-mated SiC/Si/graphite composites were investigated using pin-on-disc tribology tests under various applied loads and sliding speeds without lubricants. The results show that the friction coefficient values range between 0.10 and 0.21, and the total specific wear rates of the discs and pins are below 9.5 × 10−6 mm3/N·m. When the flash temperature is greater than 1500 °C, the main wear mechanism changes from two-body abrasive wear between SiC and graphite to oxidation wear of SiC and Si, three-body abrasive wear and adhesive wear of graphite and tribological film. The synergistic effects of Si, SiC, and graphite on wear reduction and tribological film formation were also elucidated.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
求助全文
约1分钟内获得全文 去求助
来源期刊
Wear
Wear 工程技术-材料科学:综合
CiteScore
8.80
自引率
8.00%
发文量
280
审稿时长
47 days
期刊介绍: Wear journal is dedicated to the advancement of basic and applied knowledge concerning the nature of wear of materials. Broadly, topics of interest range from development of fundamental understanding of the mechanisms of wear to innovative solutions to practical engineering problems. Authors of experimental studies are expected to comment on the repeatability of the data, and whenever possible, conduct multiple measurements under similar testing conditions. Further, Wear embraces the highest standards of professional ethics, and the detection of matching content, either in written or graphical form, from other publications by the current authors or by others, may result in rejection.
期刊最新文献
The novel rapid curing pavement maintenance seal with a low environmental impact: Preparation and performance evaluation Arc erosion mechanism and surface characteristics of TiN particles reinforced Ag based electrical contact materials Mechanism data-driven modeling of stochastic wear and degradation of rolls in hot finishing mill Improving wear resistance of yttria-stabilized tetragonal zirconia in air and high vacuum environments by multi-cycle annealing Study on the Fretting and sliding composite wear behavior of Ni-Al bronze under seawater lubrication
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1