NbC TRANSFORMATION DURING AGING IN HP40-Nb HEAT RESISTANT ALLOY

IF 1.1 Q3 METALLURGY & METALLURGICAL ENGINEERING Acta Metallurgica Slovaca Pub Date : 2022-09-24 DOI:10.36547/ams.28.3.1562
M. H. Sosa Lissarrague, C. Lanz
{"title":"NbC TRANSFORMATION DURING AGING IN HP40-Nb HEAT RESISTANT ALLOY","authors":"M. H. Sosa Lissarrague, C. Lanz","doi":"10.36547/ams.28.3.1562","DOIUrl":null,"url":null,"abstract":"In this work, the evolution of MC-type Nb-rich primary carbides in a 35Ni-25Cr-Nb-type refractory alloy, commonly known as HP40-Nb, and its transformation into Ni-Nb silicide known as G-phase (Ni16Nb6Si7), has been studied. For this purpose, the experimental technique of scanning electron microscopy was used together with X-ray microanalysis to detect changes in the chemical composition of niobium carbide over time and at a given aging temperature. The microstructure of the studied alloy, in its as-cast condition, consists of an austenitic matrix strengthened by a network of primary eutectic-like carbides rich in chromium and niobium of the M23C6 and MC types, respectively. During aging of the alloy at high temperatures, microstructural changes take place such as the secondary precipitation of M23C6 type carbides and the transformation of the primary Nb-rich carbide towards the Ni-Nb-rich silicide. It has been found that the transformation begins at the interface of the niobium carbides with the matrix, progressing towards their interior with the development of aging.","PeriodicalId":44511,"journal":{"name":"Acta Metallurgica Slovaca","volume":" ","pages":""},"PeriodicalIF":1.1000,"publicationDate":"2022-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Metallurgica Slovaca","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.36547/ams.28.3.1562","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

Abstract

In this work, the evolution of MC-type Nb-rich primary carbides in a 35Ni-25Cr-Nb-type refractory alloy, commonly known as HP40-Nb, and its transformation into Ni-Nb silicide known as G-phase (Ni16Nb6Si7), has been studied. For this purpose, the experimental technique of scanning electron microscopy was used together with X-ray microanalysis to detect changes in the chemical composition of niobium carbide over time and at a given aging temperature. The microstructure of the studied alloy, in its as-cast condition, consists of an austenitic matrix strengthened by a network of primary eutectic-like carbides rich in chromium and niobium of the M23C6 and MC types, respectively. During aging of the alloy at high temperatures, microstructural changes take place such as the secondary precipitation of M23C6 type carbides and the transformation of the primary Nb-rich carbide towards the Ni-Nb-rich silicide. It has been found that the transformation begins at the interface of the niobium carbides with the matrix, progressing towards their interior with the development of aging.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
HP40-Nb耐热合金时效过程中的NbC相变
在这项工作中,研究了35Ni-25Cr-Nb型难熔合金(通常称为HP40Nb)中MC型富Nb初生碳化物的演变,以及其转变为被称为G相的Ni-Nb硅化物(Ni16Nb6Si7)。为此,将扫描电子显微镜的实验技术与X射线显微分析结合起来,检测碳化铌的化学成分在给定老化温度下随时间的变化。所研究合金在铸态条件下的微观结构由奥氏体基体组成,该基体由分别富含M23C6和MC型铬和铌的初生共晶状碳化物网络增强。在合金在高温下时效期间,发生微观结构变化,例如M23C6型碳化物的二次沉淀和初级富Nb碳化物向富Ni Nb硅化物的转变。研究发现,转变开始于铌碳化物与基体的界面,随着时效的发展向内部发展。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Acta Metallurgica Slovaca
Acta Metallurgica Slovaca METALLURGY & METALLURGICAL ENGINEERING-
CiteScore
2.00
自引率
30.00%
发文量
22
审稿时长
12 weeks
期刊最新文献
PHYSICO-MECHANICAL PROPERTIES OF POLYMER MATRIX COMPOSITE MATERIAL REINFORCED WITH CARBONIZED CASSAVA BACK PEEL AND IRON FILLINGS EFFECT OF MIXING METHODS PRIOR THE DECOMPOSITION PROCESS ON THE DECOMPOSED FERRONICKEL SLAG WEAR AND ADHESION PROPERTIES OF MULTILAYER Ti/TiN ,(TiC)/TiCN/TaN THIN FILMS DEPOSITED ON Ti13Nb13Zr ALLOY BY CLOSE FIELD UNBALANCED MAGNETRON SPUTTERING Explicit and Implicit Integration of Constitutive Equations of Chaboche Isotropic-Kinematic Hardening Material Model INFLUENCE OF SINTERING TEMPERATURE ON THE STRUCTURAL OF Mg2Si0.3Sn0.7 ALLOY PREPARED BY POWDER METALLURGY
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1