{"title":"Effect of piezoelectric sensor debonding failure on structural health monitoring system based on lamb wave signals","authors":"Xuerong Liu, Yuanming Xu, Ning Li, Weifang Zhang","doi":"10.1007/s10999-022-09627-4","DOIUrl":null,"url":null,"abstract":"<div><p>The piezoelectric sensor in the structural health monitoring (SHM) system may be debonded due to complex service environment. However, there are little attention on the debonding behavior of piezoelectric element, which could affect the reliability of the monitoring network. This paper considers the effect of left and right debonding of sensor on receiving signal with different debonding length (2, 4, 6 and 8 mm, respectively) and debonding directions (which are 90°, 180° and 270°, respectively). A finite element model was established to simulate the interface debonding between piezo disc and Aluminium matrix, and both an experimental investigation using a real Aluminium plate is made to further comparison with the simulation results. The characteristic parameters including the amplitude and phase of time domain receiving Lamb wave signals were extracted. The simulation results show the voltage distributions of piezoelectric sensor under different debonding length and direction. In addition, receiving signal indicates that there is not a monotonic downward trend of signal amplitude with the increase of right debonding length of the sensor. And when the wave propagation direction is parallel to the sensor debonding direction (180°), the signal amplitude of the sensor is greater than that perpendicular to the debonding direction (90° and 270°).</p></div>","PeriodicalId":593,"journal":{"name":"International Journal of Mechanics and Materials in Design","volume":"19 2","pages":"285 - 298"},"PeriodicalIF":2.7000,"publicationDate":"2022-12-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Mechanics and Materials in Design","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s10999-022-09627-4","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0
Abstract
The piezoelectric sensor in the structural health monitoring (SHM) system may be debonded due to complex service environment. However, there are little attention on the debonding behavior of piezoelectric element, which could affect the reliability of the monitoring network. This paper considers the effect of left and right debonding of sensor on receiving signal with different debonding length (2, 4, 6 and 8 mm, respectively) and debonding directions (which are 90°, 180° and 270°, respectively). A finite element model was established to simulate the interface debonding between piezo disc and Aluminium matrix, and both an experimental investigation using a real Aluminium plate is made to further comparison with the simulation results. The characteristic parameters including the amplitude and phase of time domain receiving Lamb wave signals were extracted. The simulation results show the voltage distributions of piezoelectric sensor under different debonding length and direction. In addition, receiving signal indicates that there is not a monotonic downward trend of signal amplitude with the increase of right debonding length of the sensor. And when the wave propagation direction is parallel to the sensor debonding direction (180°), the signal amplitude of the sensor is greater than that perpendicular to the debonding direction (90° and 270°).
期刊介绍：
It is the objective of this journal to provide an effective medium for the dissemination of recent advances and original works in mechanics and materials'' engineering and their impact on the design process in an integrated, highly focused and coherent format. The goal is to enable mechanical, aeronautical, civil, automotive, biomedical, chemical and nuclear engineers, researchers and scientists to keep abreast of recent developments and exchange ideas on a number of topics relating to the use of mechanics and materials in design.
Analytical synopsis of contents:
The following non-exhaustive list is considered to be within the scope of the International Journal of Mechanics and Materials in Design:
Intelligent Design:
Nano-engineering and Nano-science in Design;
Smart Materials and Adaptive Structures in Design;
Mechanism(s) Design;
Design against Failure;
Design for Manufacturing;
Design of Ultralight Structures;
Design for a Clean Environment;
Impact and Crashworthiness;
Microelectronic Packaging Systems.
Advanced Materials in Design:
Newly Engineered Materials;
Smart Materials and Adaptive Structures;
Micromechanical Modelling of Composites;
Damage Characterisation of Advanced/Traditional Materials;
Alternative Use of Traditional Materials in Design;
Functionally Graded Materials;
Failure Analysis: Fatigue and Fracture;
Multiscale Modelling Concepts and Methodology;
Interfaces, interfacial properties and characterisation.
Design Analysis and Optimisation:
Shape and Topology Optimisation;
Structural Optimisation;
Optimisation Algorithms in Design;
Nonlinear Mechanics in Design;
Novel Numerical Tools in Design;
Geometric Modelling and CAD Tools in Design;
FEM, BEM and Hybrid Methods;
Integrated Computer Aided Design;
Computational Failure Analysis;
Coupled Thermo-Electro-Mechanical Designs.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
