PRODUCTIVITY AND QUALITY IN THE PROCESSING WOOD OPERATION FOR ENERGY

IF 0.6 4区 农林科学 Q4 FORESTRY Revista Arvore Pub Date : 2023-06-26 DOI:10.1590/1806-908820230000009
Eloise Prates, E. S. Lopes, C. K. Rodrigues, M. K. C. Silva, D. A. Silva
{"title":"PRODUCTIVITY AND QUALITY IN THE PROCESSING WOOD OPERATION FOR ENERGY","authors":"Eloise Prates, E. S. Lopes, C. K. Rodrigues, M. K. C. Silva, D. A. Silva","doi":"10.1590/1806-908820230000009","DOIUrl":null,"url":null,"abstract":"ABSTRACT Optimizing resources is essential for the excellence and competitiveness of a forestry company. In this context, this study evaluated the productivity and quality of eucalyptus wood processing for energy purposes. The study was conducted in a forestry company in Paraná State in stands of Eucalyptus urophylla × Eucalyptus grandis and Eucalyptus saligna clones named stands 1 and 2, respectively, with an age of 7 years old. The trees were processed with a harvester and included the following four stem diameter limits for pulp production and co-products for energy purposes: 8, 10, 12, and 14 cm; and pulp logs with a length of 7.20 m. The technical analysis of the operation determined the average operating cycle times, utilization rate and machine productivity. In addition, a quality analysis determined the stem diameter limits for production of the co-products and the lengths of the pulp logs; the limit diameters were compared by the Tukey’s test, and the stands by the Student’s t-test (α ≤ 0.05). The results showed that the processing time decreased with increasing limit diameter, with the highest values being in stand 1 due to the higher number of branches and forked trees. The processing logs at 10 cm limit diameter provided higher harvester productivity, with 59.5 m³ PMH-¹ and 62.2 m³ PMH-¹ in stands 1 and 2, respectively. Furthermore, the best quality in the limit diameter measurement was obtained at 10 cm. Thus, the effects of forest stand and limit diameters on processing and operation quality were evident.","PeriodicalId":21214,"journal":{"name":"Revista Arvore","volume":null,"pages":null},"PeriodicalIF":0.6000,"publicationDate":"2023-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Revista Arvore","FirstCategoryId":"97","ListUrlMain":"https://doi.org/10.1590/1806-908820230000009","RegionNum":4,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"FORESTRY","Score":null,"Total":0}
引用次数: 0

Abstract

ABSTRACT Optimizing resources is essential for the excellence and competitiveness of a forestry company. In this context, this study evaluated the productivity and quality of eucalyptus wood processing for energy purposes. The study was conducted in a forestry company in Paraná State in stands of Eucalyptus urophylla × Eucalyptus grandis and Eucalyptus saligna clones named stands 1 and 2, respectively, with an age of 7 years old. The trees were processed with a harvester and included the following four stem diameter limits for pulp production and co-products for energy purposes: 8, 10, 12, and 14 cm; and pulp logs with a length of 7.20 m. The technical analysis of the operation determined the average operating cycle times, utilization rate and machine productivity. In addition, a quality analysis determined the stem diameter limits for production of the co-products and the lengths of the pulp logs; the limit diameters were compared by the Tukey’s test, and the stands by the Student’s t-test (α ≤ 0.05). The results showed that the processing time decreased with increasing limit diameter, with the highest values being in stand 1 due to the higher number of branches and forked trees. The processing logs at 10 cm limit diameter provided higher harvester productivity, with 59.5 m³ PMH-¹ and 62.2 m³ PMH-¹ in stands 1 and 2, respectively. Furthermore, the best quality in the limit diameter measurement was obtained at 10 cm. Thus, the effects of forest stand and limit diameters on processing and operation quality were evident.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
木材能源加工作业的生产率和质量
资源优化是林业企业实现卓越和竞争力的关键。在此背景下,本研究评估了用于能源目的的桉树木材加工的生产力和质量。本研究在帕南州某林业公司的尾叶桉×大桉和盐柳桉无性系林分进行,林分分别命名为林分1和林分2,树龄为7岁。这些树是用一台收割机处理的,包括以下四种用于纸浆生产和能源副产品的茎直径限制:8、10、12和14厘米;长7.20 m的纸浆原木。通过对操作的技术分析,确定了平均操作周期次数、利用率和机器生产率。此外,质量分析确定了副产物生产的管材直径限制和纸浆测井长度;极限直径比较采用Tukey检验,采用Student’s t检验(α≤0.05)。结果表明:处理时间随着极限直径的增大而减小,其中1号林分枝条和分枝数量较多,处理时间最大;10 cm极限直径的加工原木提供了更高的收获效率,1号和2号展台分别为59.5 m³PMH-¹和62.2 m³PMH-¹。在10 cm处的极限直径测量质量最好。因此,林分和极限直径对加工和经营质量的影响是明显的。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Revista Arvore
Revista Arvore FORESTRY-
CiteScore
1.00
自引率
0.00%
发文量
32
审稿时长
4-8 weeks
期刊介绍: A Revista Árvore é um veículo de comunicação científica da Sociedade de Investigações Florestais – SIF. O jornal é de acesso gratuito, revisado por pares, que publica bimestralmente trabalhos científicos originais no campo da Ciência Florestal. As áreas temáticas para publicação são: Ambiência e Conservação da Natureza, Manejo Florestal, Silvicultura e Tecnologia da Madeira e Utilização de Produtos Florestais. A política editorial visa manter alta conduta ética em relação à publicação e aos seus funcionários, rigor na qualidade dos artigos científicos, seleção de revisores qualificados, respeito profissional aos autores e processo de tomada de decisão imparcial. A Revista Árvore publica artigos apenas em inglês. Artigos de revisão podem ser publicados se houver uma discussão relevante resumindo o estado da arte sobre o assunto. A revisão estrita da literatura não é aceita.
期刊最新文献
MIXED MODELS FOR NUTRIENTS PREDICTION IN SPECIES OF THE BRAZILIAN CAATINGA BIOME EMERGENCE, INITIAL GROWTH, AND SEEDLING QUALITY OF Eremanthus incanus: SUBSIDIES FOR GENETIC BREEDING AND CONSERVATION VEGETATIVE RESCUE AND PROPAGATION OF NATIVE Ilex paraguariensis POPULATIONS IN SANTA CATARINA STATE, BRAZIL EFFECT OF pH ON THE ANTIBACTERIAL AND ANTIFUNGAL ACTIVITY OF WOOD VINEGAR (PYROLIGNEOUS EXTRACT) FROM EUCALYPTUS CHARACTERISTIC STRENGTHS IN THE COMPRESSION AND IN THE STATIC BENDING AS PARAMETERS TO ESTIMATE CHARACTERISTIC SHEAR STRENGTH FOR TIMBER DESIGN
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1