Diametric splitting tests on unsaturated expansive soil with different dry densities based on particle image velocimetry technique

Abstract

There is a close relationship between tensile strength of soil and crack development, but the tensile stress-strain in full failure process is rarely studied because challenges exist in accurately measuring shear strain using traditional methods. In this paper, we employed a newly developed diametric splitting testing apparatus and particle image velocimetry (PIV) system to study the tensile strength of compacted unsaturated expansive soil with different water contents and initial dry densities. Soil water characteristic curves of compacted expansive soil with different initial dry densities were determined using the filter paper method. Test results show that the tensile strength increases first and then decreases with increasing water content, and there is a critical water content for the peak load vs. water content curve. The diametric splitting test process can be divided into four stages on the basis of the plotted load-displacement curves: a stress contact adjustment stage (I); stress approximately linear increasing stage (II); tensile failure stage (III); and residual stage (IV). Under the same water content, the angle between the major directions of the displacement vector and the major crack decreases with increasing the dry density, especially when the fissure appears. Using the particle image velocimetry technique, the displacement and strain during the test process recorded is helpful for better understanding the soil failure mechanism.