Characteristics of Leachate Upon Hydrothermal Treatment Processing: Case Study of Ampang District Municipal Solid Waste Leachate

IF 0.6 Q3 ENGINEERING, MULTIDISCIPLINARY IIUM Engineering Journal Pub Date : 2022-07-04 DOI:10.31436/iiumej.v23i2.2196
Hadi Purwanto, S. S. Khamis, H. Mohd Salleh, A. N. Rozhan, M. Abd. Rahman, R. Othman
{"title":"Characteristics of Leachate Upon Hydrothermal Treatment Processing: Case Study of Ampang District Municipal Solid Waste Leachate","authors":"Hadi Purwanto, S. S. Khamis, H. Mohd Salleh, A. N. Rozhan, M. Abd. Rahman, R. Othman","doi":"10.31436/iiumej.v23i2.2196","DOIUrl":null,"url":null,"abstract":"Municipal solid waste (MSW) leachate is a hazardous liquid produced from decomposition of solid waste with high amount of organic matter and ammonia-nitrogen with obnoxious smell. This study aimed to investigate the behavior of MSW leachate when subjected to hydrothermal treatment using an autoclave set up at below water critical points (temperatures of 100 °C, 150 °C, and 200 °C at 0.1 MPa, 0.4 MPa and 1.6 MPa, respectively) with 15 min and 60 min holding time. Physicochemical characterization of the setup at 200 °C and 1.6 MPa at 60 min holding time indicates a feasible parameter when materials that caused the dark color and obnoxious smell were almost completely removed. Over 99% of chemical oxygen demand and ammonia nitrogen was eliminated when treated with hydrothermal treatment and yielded a condensed liquid product that complied with permissible limits set by the National Water Quality Standard Malaysia and the World Health Organization for wastewater discharges for irrigation purposes. Chromatographic analysis indicated that most of the organic compounds present in the raw leachate was removed. This processing is believed to be an environmentally friendly method that can treat MSW leachate rapidly, and it has the potential to be used as an effective alternative to existing leachate treatment technologies.\nABSTRAK Larut lesap daripada sisa pepejal perbandaran merupakan cecair merbahaya yang berlaku semasa penguraian sisa pepejal dengan jumlah bahan organik dan ammonia-nitrogen yang tinggi dengan bau menjengkelkan. Kajian ini bertujuan bagi mengkaji sifat larut lesap ini apabila melalui rawatan hidroterma menggunakan autoklaf yang ditetapkan di bawah titik kritikal air (suhu 100 °C, 150 °C, dan 200 °C pada 0.1 MPa, 0.4 MPa dan 1.6 MPa masing-masing) dengan tempoh masa 15 minit dan 60 minit. Sifat fizikal kimia yang dirawat pada suhu 200 °C, 1.6 MPa selama 60 minit menunjukkan satu parameter yang boleh dilaksanakan apabila warna gelap dan bau yang menjengkelkan hampir dikurangkan sepenuhnya. Lebih 99% ammonia nitrogen disingkirkan apabila dirawat dengan rawatan hidrotherma dan menghasilkan air bersih yang mematuhi had yang dibenarkan oleh Piawaian Kualiti Air Kebangsaan Malaysia (NWQSM) dan Pertubuhan Kesihatan Sedunia (WHO) bagi pelupusan air sisa pepejal bagi tujuan pengairan. Analisis kromatografi menunjukkan bahawa sebahagian besar sebatian organik yang terdapat dalam larut resap telah disingkirkan. Pemprosesan ini diyakini merupakan kaedah mesra alam yang dapat merawat dengan cepat, dan berpotensi digunakan sebagai alternatif efektif untuk teknologi rawatan larut lesap sedia ada.","PeriodicalId":13439,"journal":{"name":"IIUM Engineering Journal","volume":"79 1","pages":""},"PeriodicalIF":0.6000,"publicationDate":"2022-07-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IIUM Engineering Journal","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31436/iiumej.v23i2.2196","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

Municipal solid waste (MSW) leachate is a hazardous liquid produced from decomposition of solid waste with high amount of organic matter and ammonia-nitrogen with obnoxious smell. This study aimed to investigate the behavior of MSW leachate when subjected to hydrothermal treatment using an autoclave set up at below water critical points (temperatures of 100 °C, 150 °C, and 200 °C at 0.1 MPa, 0.4 MPa and 1.6 MPa, respectively) with 15 min and 60 min holding time. Physicochemical characterization of the setup at 200 °C and 1.6 MPa at 60 min holding time indicates a feasible parameter when materials that caused the dark color and obnoxious smell were almost completely removed. Over 99% of chemical oxygen demand and ammonia nitrogen was eliminated when treated with hydrothermal treatment and yielded a condensed liquid product that complied with permissible limits set by the National Water Quality Standard Malaysia and the World Health Organization for wastewater discharges for irrigation purposes. Chromatographic analysis indicated that most of the organic compounds present in the raw leachate was removed. This processing is believed to be an environmentally friendly method that can treat MSW leachate rapidly, and it has the potential to be used as an effective alternative to existing leachate treatment technologies. ABSTRAK Larut lesap daripada sisa pepejal perbandaran merupakan cecair merbahaya yang berlaku semasa penguraian sisa pepejal dengan jumlah bahan organik dan ammonia-nitrogen yang tinggi dengan bau menjengkelkan. Kajian ini bertujuan bagi mengkaji sifat larut lesap ini apabila melalui rawatan hidroterma menggunakan autoklaf yang ditetapkan di bawah titik kritikal air (suhu 100 °C, 150 °C, dan 200 °C pada 0.1 MPa, 0.4 MPa dan 1.6 MPa masing-masing) dengan tempoh masa 15 minit dan 60 minit. Sifat fizikal kimia yang dirawat pada suhu 200 °C, 1.6 MPa selama 60 minit menunjukkan satu parameter yang boleh dilaksanakan apabila warna gelap dan bau yang menjengkelkan hampir dikurangkan sepenuhnya. Lebih 99% ammonia nitrogen disingkirkan apabila dirawat dengan rawatan hidrotherma dan menghasilkan air bersih yang mematuhi had yang dibenarkan oleh Piawaian Kualiti Air Kebangsaan Malaysia (NWQSM) dan Pertubuhan Kesihatan Sedunia (WHO) bagi pelupusan air sisa pepejal bagi tujuan pengairan. Analisis kromatografi menunjukkan bahawa sebahagian besar sebatian organik yang terdapat dalam larut resap telah disingkirkan. Pemprosesan ini diyakini merupakan kaedah mesra alam yang dapat merawat dengan cepat, dan berpotensi digunakan sebagai alternatif efektif untuk teknologi rawatan larut lesap sedia ada.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
水热处理后渗滤液的特性研究——以安邦区生活垃圾渗滤液为例
城市生活垃圾渗滤液是城市生活垃圾分解后产生的含有大量有机物和氨氮的有害液体,具有恶臭。本研究旨在研究城市生活垃圾渗滤液在低于水临界温度(温度分别为100°C、150°C和200°C,温度分别为0.1 MPa、0.4 MPa和1.6 MPa)、保温时间为15 min和60 min时的行为。在200°C、1.6 MPa、60 min的保温条件下对该装置进行了理化表征,结果表明,当导致颜色变深和难闻气味的材料几乎完全去除时,该参数是可行的。经水热处理后,99%以上的化学需氧量和氨氮被消除,产生的浓缩液体产品符合马来西亚国家水质标准和世界卫生组织为灌溉目的排放的废水所规定的允许限度。色谱分析表明,原渗滤液中存在的大部分有机化合物被去除。这种处理方法被认为是一种环境友好的方法,可以快速处理城市固体废物渗滤液,并有可能成为现有渗滤液处理技术的有效替代方案。摘要:Larut lesap daripada sisa pepejal perbandaran merupakan cecair merbahaya yang berlaku semasa penguraian sisa pepejal dengan jumlah bahan有机氮氮氮氮氮氮氮氮氮氮氮氮氮氮氮氮氮氮氮氮。空气临界温度(苏湖100℃,150℃,丹200℃,0.1 MPa, 0.4 MPa, 1.6 MPa),登干时间15分钟,丹60分钟。Sifat fizikal kimia yang dirawat padsuhu 200°C, 1.6 MPa selama 60 min menunjukkan satu parameter yang boleh dilaksanakan apabila warna gelap dan bau yang menjengkelkan hampir dikurangkan sepenuhnya。Lebih 99%氨氮disingkirkan apabila dirawat dengan rawatan hidrotherma dan menghasilkan air bersih yang mematuhi had yang dibenarkan oleh Piawaian Kualiti air Kebangsaan Malaysia (NWQSM) dan Pertubuhan Kesihatan Sedunia (WHO) bagi pelupusan air sisa pepejal bagi tujuan pengairan。分析血象图,分析血象图,分析血象图,分析血象图,分析血象图,分析血象图,分析血象图。Pemprosesan ini diyakini merupakan kaedah mesra alam yang dapat merupakan dengan cepat,但berpotensi digunakan sebagai替代有效的技术,rawati和larapesap sebagai。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
IIUM Engineering Journal
IIUM Engineering Journal ENGINEERING, MULTIDISCIPLINARY-
CiteScore
2.10
自引率
20.00%
发文量
57
审稿时长
40 weeks
期刊介绍: The IIUM Engineering Journal, published biannually (June and December), is a peer-reviewed open-access journal of the Faculty of Engineering, International Islamic University Malaysia (IIUM). The IIUM Engineering Journal publishes original research findings as regular papers, review papers (by invitation). The Journal provides a platform for Engineers, Researchers, Academicians, and Practitioners who are highly motivated in contributing to the Engineering disciplines, and Applied Sciences. It also welcomes contributions that address solutions to the specific challenges of the developing world, and address science and technology issues from an Islamic and multidisciplinary perspective. Subject areas suitable for publication are as follows: -Chemical and Biotechnology Engineering -Civil and Environmental Engineering -Computer Science and Information Technology -Electrical, Computer, and Communications Engineering -Engineering Mathematics and Applied Science -Materials and Manufacturing Engineering -Mechanical and Aerospace Engineering -Mechatronics and Automation Engineering
期刊最新文献
PHOTOVOLTAIC MODULE TEMPERATURE ESTIMATION MODEL FOR THE ONE-TIME-POINT DAILY ESTIMATION METHOD BIPHASIC CRUDE PALM OIL DECHLORINATION: EFFECT OF VOLUME RATIO AND CONCENTRATION OF SODIUM SILICATE TO HYDROXIDE ION DISTRIBUTION MIXING SEQUENCE EFFECT OF CEMENT COMPOSITES WITH CARBON FIBRES EFFECTS OF SOIL ERODIBILITY ON RIVERBANK EROSION AND FAILURES KEY SUCCESS FACTORS IN ROAD MAINTENANCE MANAGEMENT PROJECTS (A CASE STUDY OF MAYSAN PROVINCE, IRAQ)
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1