Novel CO2/N2 Foam Concept and Optimization Scheme for Improving CO2-foam EOR Process

Abstract

Nitrogen and Carbon dioxide are the most common gases utilized in enhanced oil recovery (EOR) techniques. Most of the gas injection process suffers from the gravity override and viscous fingering resulting in lower oil recovery. Foam is introduced in enhanced oil recovery (EOR) to mitigate these problems encountered during gas flooding. When it comes to the CO2-gas injection the CO2-becomes supercritical at a typical reservoir condition giving it difficulty to form CO2-foam at reservoir condition. The CO2-foam has a common problem to become weaker above its supercritical conditions of 1100 psi and 31°C. As a result, the advantages of using CO2 foam are diminished due to the weakness of CO2-foam at supercritical conditions and results in a lower recovery. However, CO2-foam can be generated by replacing a portion of CO2 with N2 gas. It lacks the understating of mixture properties and its effect on EOR. This study evaluates the performance of CO2/N2 foam at supercritical conditions for EOR. It aims to improve recovery under supercritical conditions by using N2/CO2 mixture foam and optimize the foam quality and CO2/N2 ratio. The results from the experiments showed that the CO2/N2 foam flooding recovered an additional oil of Original Initial Oil in Place (OIIP) indicating that foam flooding succeeded in producing more oil than pure CO2-foam injection processes. Also, the results of foam flooding at different foam quality and CO2/N2 ratio significantly affected the performance and recovery of the process. Hence it is necessary to optimize the CO2/N2 foam parameters flooding process which is affected by the parameters such as foam quality and CO2/N2 ratio. The study also shows an experimental approach for optimizing CO2/N2 foam parameters. The concept of adding N2 to CO2 is a novel way of generating CO2 foam at supercritical conditions. Although investigators are trying different ways to generate the strong and stable CO2- foam, adding N2 to CO2 can be considered to be the easiest way for foam generation as CO2 is always having some impurities in the form of other gases and N2 can be considered as one of such gas helps in generating the foam.