BIO-OIL AND BIOGAS FROM THE PYROLYSIS OF SEWAGE SLUDGE, AND NON-ISOTHERMAL DEGRADATION ON USY ZEOLITE

M. Pedroza, J. F. Souza, G. E. G. Vieira, M. Bezerra
{"title":"BIO-OIL AND BIOGAS FROM THE PYROLYSIS OF SEWAGE SLUDGE, AND NON-ISOTHERMAL DEGRADATION ON USY ZEOLITE","authors":"M. Pedroza, J. F. Souza, G. E. G. Vieira, M. Bezerra","doi":"10.5419/BJPG2017-0013","DOIUrl":null,"url":null,"abstract":"This paper examines the pyrolyzation of sewage sludge using a bench scale reactor and the characterization of its products. Non-isothermal degradation via thermogravimetry was used to estimate activation energy of regular and catalytic degradation under inert atmosphere. The pyrolysis reactor, a rotating cylinder coupled to a gas-washing column with a centrifuge at the top, was used to condensate pyrolysis vapors. The experimental procedure was divided into two parts: (I) pyrolysis of a sewage sludge guided by a 23 experimental design with center point, at temperatures of 520, 560, and 600 °C; inert flow rates of 3, 4.5, and 6 L h-1; centrifugation rotation frequencies of 20, 23, and 26 Hz; under a constant biomass flow rate of 408 g h-1; (II) determination of the activation energy of thermal degradation, with and without the USY zeolite catalyst, using an isoconversional analysis of integration. For the later, three heating rates were tested: 5, 10, and 20 °C min-1. The bio-oil obtained in the bench-scale pyrolysis reactor had the following characteristics: pH from 6.0 to 8.1, density from 1.0 to 1.1 g mL-1, solid contents from 0.7 to 0.8%, and higher heating values from 17.4 to 18.4 MJ kg-1. The bio-oil consisted mostly of aliphatic and monoaromatic hydrocarbons, substituted aromatics, polyaromatic hydrocarbons, long amides, and amines. The components found in the gas phase were: H2, CO, CO2, CH4, C2, C3, C4, C5, and C6. The syngas maximum content was 59.2%. Results from the thermal analysis showed that the USY was effective in decreasing the thermal degradation activation energy. Near the temperature when the pyrolysis occurred, the activation energy dropped from 78.5 to 62.6 kJ mol-1, and the conversion was 80%. The average values observed for the activation energy with and without catalyst, at conversions from 40 to 80%, were 103.9 and 155.0 kJ mol-1, respectively, which indicates that the USY zeolite successfully enabled a new pathway for the sewage sludge’s thermal degradation.","PeriodicalId":9312,"journal":{"name":"Brazilian Journal of Petroleum and Gas","volume":"50 1","pages":"149-163"},"PeriodicalIF":0.0000,"publicationDate":"2017-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Brazilian Journal of Petroleum and Gas","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.5419/BJPG2017-0013","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 6

Abstract

This paper examines the pyrolyzation of sewage sludge using a bench scale reactor and the characterization of its products. Non-isothermal degradation via thermogravimetry was used to estimate activation energy of regular and catalytic degradation under inert atmosphere. The pyrolysis reactor, a rotating cylinder coupled to a gas-washing column with a centrifuge at the top, was used to condensate pyrolysis vapors. The experimental procedure was divided into two parts: (I) pyrolysis of a sewage sludge guided by a 23 experimental design with center point, at temperatures of 520, 560, and 600 °C; inert flow rates of 3, 4.5, and 6 L h-1; centrifugation rotation frequencies of 20, 23, and 26 Hz; under a constant biomass flow rate of 408 g h-1; (II) determination of the activation energy of thermal degradation, with and without the USY zeolite catalyst, using an isoconversional analysis of integration. For the later, three heating rates were tested: 5, 10, and 20 °C min-1. The bio-oil obtained in the bench-scale pyrolysis reactor had the following characteristics: pH from 6.0 to 8.1, density from 1.0 to 1.1 g mL-1, solid contents from 0.7 to 0.8%, and higher heating values from 17.4 to 18.4 MJ kg-1. The bio-oil consisted mostly of aliphatic and monoaromatic hydrocarbons, substituted aromatics, polyaromatic hydrocarbons, long amides, and amines. The components found in the gas phase were: H2, CO, CO2, CH4, C2, C3, C4, C5, and C6. The syngas maximum content was 59.2%. Results from the thermal analysis showed that the USY was effective in decreasing the thermal degradation activation energy. Near the temperature when the pyrolysis occurred, the activation energy dropped from 78.5 to 62.6 kJ mol-1, and the conversion was 80%. The average values observed for the activation energy with and without catalyst, at conversions from 40 to 80%, were 103.9 and 155.0 kJ mol-1, respectively, which indicates that the USY zeolite successfully enabled a new pathway for the sewage sludge’s thermal degradation.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
污水污泥热解产生的生物油和沼气,以及在沸石上的非等温降解
本文研究了在实验规模反应器中对污水污泥的热解反应及其产物的表征。用热重法测定了惰性气氛下正常降解和催化降解的活化能。热解反应器是一个旋转圆筒,与顶部有离心机的气体洗涤塔相连,用于冷凝热解蒸汽。实验过程分为两部分:(1)采用23中心点实验设计,在520、560和600℃温度下对污泥进行热解;惰性流速分别为3、4.5和6l h-1;离心旋转频率分别为20、23、26 Hz;恒定生物质流量为408 g h-1;(2)利用积分等转换分析,测定了在使用和不使用USY沸石催化剂时热降解的活化能。对于后者,测试了三种加热速率:5、10和20°C min-1。在实验规模热解反应器中得到的生物油具有以下特点:pH值为6.0 ~ 8.1,密度为1.0 ~ 1.1 g mL-1,固含量为0.7 ~ 0.8%,热值为17.4 ~ 18.4 MJ kg-1。生物油主要由脂肪族和单芳烃、取代芳烃、多芳烃、长酰胺和胺类化合物组成。在气相中发现的成分有:H2, CO, CO2, CH4, C2, C3, C4, C5和C6。合成气最高含量为59.2%。热分析结果表明,USY能有效降低热降解活化能。在发生热解的温度附近,活化能从78.5下降到62.6 kJ mol-1,转化率为80%。在转化率从40%到80%的范围内,有催化剂和无催化剂的平均活化能分别为103.9和155.0 kJ mol-1,这表明USY沸石成功地为污泥的热降解开辟了一条新的途径。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
IMMISCIBLE VISCOUS FINGERING MODELING OF TERTIARY POLYMER FLOODING BASED ON REAL CASE OF HEAVY OIL RESERVOIR MODEL SYNTHETIC WATER-IN-OIL EMULSIONS: EFFECT OF OIL COMPOSITION ON STABILITY AND DEMULSIFIER PERFORMANCE WELL-TO-WELL (W2W) ELECTROMAGNETIC TOMOGRAPHY MODELING ADVANCEMENT: IMPROVING PRECISION AND EFFECTIVENESS WITH REGULARIZATION SCALE INHIBITOR SQUEEZE TREATMENT: AN ADVANCED BIBLIOMETRIC ANALYSIS REACTIVE FLOW IN CARBONATE ROCKS FROM LACUSTRINE ENVIRONMENTS: THE EFFECTS OF PRESSURE AND FLUID SALINITY
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1