T. T. Dang, D. Pham, N. Phạm, Ngoc Ha Vu, Thi To Quynh Cung, Minh Tan Nguyen
{"title":"Evaluation of the Novel Dehydration Concept for Wild Multi Floral Honey in Vietnam","authors":"T. T. Dang, D. Pham, N. Phạm, Ngoc Ha Vu, Thi To Quynh Cung, Minh Tan Nguyen","doi":"10.3303/CET2187055","DOIUrl":null,"url":null,"abstract":"Dehydration of honey is an essential step during honey production in tropical countries to prevent rapid deterioration in quality because of the fermentation. In this study, honey dehydration at atmospheric pressure and temperatures of 36°C, 42°C, and 52°C in a pilot dehydration plant based on JEVA concept was carried out to reduce the moisture content of honey to below 17%. Honey dehydration at a temperature range of 36°C - 42°C achieved a high dehydration rate and low energy simultaneously due to integrating a heat pump into the processing loop. The temperature range of 36°C - 42°C was found out to be the most favourable processing temperature for honey dehydration since at these operational conditions, minimal colour degradation of honey, a low decline in diastase number and high retention of TPC and TFC (87.0% - 88.2% and 74.8% - 80.6%) were achieved. Moreover, honey samples dehydrated at 36°C and 42°C preserved antibacterial activity for strains of MRSE, Salmonella Typhimurium, Proteus Vulgaris, and Pseudomonas aeruginosa compared to raw honey. Under similar operational conditions, the proposed dehydration plant has been found to be better than that of other honey dehydrators reported in the literature in terms of dehydration rate, energy consumption, and lighter impacts on physiochemical characteristics.","PeriodicalId":9695,"journal":{"name":"Chemical engineering transactions","volume":"51 1","pages":"325-330"},"PeriodicalIF":0.0000,"publicationDate":"2021-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Chemical engineering transactions","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3303/CET2187055","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Chemical Engineering","Score":null,"Total":0}
引用次数: 0
Abstract
Dehydration of honey is an essential step during honey production in tropical countries to prevent rapid deterioration in quality because of the fermentation. In this study, honey dehydration at atmospheric pressure and temperatures of 36°C, 42°C, and 52°C in a pilot dehydration plant based on JEVA concept was carried out to reduce the moisture content of honey to below 17%. Honey dehydration at a temperature range of 36°C - 42°C achieved a high dehydration rate and low energy simultaneously due to integrating a heat pump into the processing loop. The temperature range of 36°C - 42°C was found out to be the most favourable processing temperature for honey dehydration since at these operational conditions, minimal colour degradation of honey, a low decline in diastase number and high retention of TPC and TFC (87.0% - 88.2% and 74.8% - 80.6%) were achieved. Moreover, honey samples dehydrated at 36°C and 42°C preserved antibacterial activity for strains of MRSE, Salmonella Typhimurium, Proteus Vulgaris, and Pseudomonas aeruginosa compared to raw honey. Under similar operational conditions, the proposed dehydration plant has been found to be better than that of other honey dehydrators reported in the literature in terms of dehydration rate, energy consumption, and lighter impacts on physiochemical characteristics.
期刊介绍:
Chemical Engineering Transactions (CET) aims to be a leading international journal for publication of original research and review articles in chemical, process, and environmental engineering. CET begin in 2002 as a vehicle for publication of high-quality papers in chemical engineering, connected with leading international conferences. In 2014, CET opened a new era as an internationally-recognised journal. Articles containing original research results, covering any aspect from molecular phenomena through to industrial case studies and design, with a strong influence of chemical engineering methodologies and ethos are particularly welcome. We encourage state-of-the-art contributions relating to the future of industrial processing, sustainable design, as well as transdisciplinary research that goes beyond the conventional bounds of chemical engineering. Short reviews on hot topics, emerging technologies, and other areas of high interest should highlight unsolved challenges and provide clear directions for future research. The journal publishes periodically with approximately 6 volumes per year. Core topic areas: -Batch processing- Biotechnology- Circular economy and integration- Environmental engineering- Fluid flow and fluid mechanics- Green materials and processing- Heat and mass transfer- Innovation engineering- Life cycle analysis and optimisation- Modelling and simulation- Operations and supply chain management- Particle technology- Process dynamics, flexibility, and control- Process integration and design- Process intensification and optimisation- Process safety- Product development- Reaction engineering- Renewable energy- Separation processes- Smart industry, city, and agriculture- Sustainability- Systems engineering- Thermodynamic- Waste minimisation, processing and management- Water and wastewater engineering