Feasibility Study of Carbon Dioxide Methanation: Assessment of Various Supported Nickel Catalyst

N. Berahim, A. Seman, M. G. M. Noh
{"title":"Feasibility Study of Carbon Dioxide Methanation: Assessment of Various Supported Nickel Catalyst","authors":"N. Berahim, A. Seman, M. G. M. Noh","doi":"10.2118/193294-MS","DOIUrl":null,"url":null,"abstract":"\n Carbon dioxide (CO2) management is vital for ensuring the economic and environment viability for monetization of high CO2 gas field. Apart from the great technical challenge in separating high concentration of CO2 in gas field economically, the management of separated CO2 is a fine balance between the sink-in value by sequestration and creation of value via conversion to product, constrained by the thermodynamic challenge in breaking the stable CO2 molecule. Conversion to methane is one the exploratory idea due to ease of integration to current product line-up of PETRONAS. Catalytic conversion of CO2 to methane are reported here over various supported nickel base catalyst, namely ZrO2, La2O3, and Al2O3 at temperature ranging from 300 to 400°C under atmospheric pressure. The catalysts with fixed Ni loadings were prepared by wet impregnation technique, characterized and their performances were evaluated in a parallel reactor under Sabatier-based CO2 conversion. Reaction temperature and GHSV were taken into account as two important parameters with fixed H2/CO2 molar ratio. Experimental results indicate that among all catalysts, Ni/Al2O3 give the highest CO2 conversion of 74% and high CH4 selectivity of 99% at temperature of 380°C and GHSV 10000 h-1. This asserted Ni supported on Al2O3 as a potential catalyst for CO2 conversion and promising methanation performance over a low cost catalyst.","PeriodicalId":11014,"journal":{"name":"Day 1 Mon, November 12, 2018","volume":"3 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2018-11-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Day 1 Mon, November 12, 2018","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2118/193294-MS","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

Carbon dioxide (CO2) management is vital for ensuring the economic and environment viability for monetization of high CO2 gas field. Apart from the great technical challenge in separating high concentration of CO2 in gas field economically, the management of separated CO2 is a fine balance between the sink-in value by sequestration and creation of value via conversion to product, constrained by the thermodynamic challenge in breaking the stable CO2 molecule. Conversion to methane is one the exploratory idea due to ease of integration to current product line-up of PETRONAS. Catalytic conversion of CO2 to methane are reported here over various supported nickel base catalyst, namely ZrO2, La2O3, and Al2O3 at temperature ranging from 300 to 400°C under atmospheric pressure. The catalysts with fixed Ni loadings were prepared by wet impregnation technique, characterized and their performances were evaluated in a parallel reactor under Sabatier-based CO2 conversion. Reaction temperature and GHSV were taken into account as two important parameters with fixed H2/CO2 molar ratio. Experimental results indicate that among all catalysts, Ni/Al2O3 give the highest CO2 conversion of 74% and high CH4 selectivity of 99% at temperature of 380°C and GHSV 10000 h-1. This asserted Ni supported on Al2O3 as a potential catalyst for CO2 conversion and promising methanation performance over a low cost catalyst.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
二氧化碳甲烷化的可行性研究:不同负载镍催化剂的评价
二氧化碳(CO2)管理对于确保高二氧化碳气田货币化的经济和环境可行性至关重要。除了从经济上分离气田高浓度二氧化碳的巨大技术挑战外,分离后的二氧化碳的管理是在封存的吸收价值和转化为产品的价值创造之间的微妙平衡,受到破坏稳定的二氧化碳分子的热力学挑战的约束。转化为甲烷是一个探索性的想法,因为易于整合到马来西亚国家石油公司目前的产品线。本文报道了不同负载型镍基催化剂(ZrO2、La2O3和Al2O3)在300 ~ 400℃的常压下催化CO2转化为甲烷。采用湿浸渍法制备了固定负载Ni的催化剂,并在Sabatier-based CO2转化的平行反应器中对其进行了表征和性能评价。反应温度和GHSV是固定H2/CO2摩尔比的两个重要参数。实验结果表明,在380℃、10000 h-1 GHSV条件下,Ni/Al2O3催化剂的CO2转化率最高,达到74%,CH4选择性最高,达到99%。这表明,与低成本的催化剂相比,氧化铝负载的Ni是一种潜在的二氧化碳转化催化剂,具有良好的甲烷化性能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Does the kappa number method accurately reflect lignin content in nonwood pulps? Using multistage models to evaluate how pulp washing after the first extraction stage impacts elemental chlorine-free bleach demand Understanding the risks and rewards of using 50% vs. 10% strength peroxide in pulp bleach plants Understanding the pulping and bleaching performances of eucalyptus woods affected by physiological disturbance Measurements of the Inorganic Scale Buildup Rate on Downhole Completion Equipment – Debris Barrier Screens
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1