Aris Ansori, S. Soeparman, D. Widhiyanuriyawan, T. Widodo
{"title":"USE OF TIO2 AS A REINFORCEMENT OF CASSAVA STARCH/PVA COMPOSITES ON MOISTURE-RESISTANT PROPERTIES OF TRIBOELECTRIC NANOGENERATORS (TENG) FILM","authors":"Aris Ansori, S. Soeparman, D. Widhiyanuriyawan, T. Widodo","doi":"10.31436/iiumej.v24i2.2554","DOIUrl":null,"url":null,"abstract":"High humidity environments can accelerate the transmission, neutralization, or dissipation of frictional charges on the frictional surface of solid-solid triboelectric nanogenerator films (TENGs), which can reduce the output power. The moisture resistance properties of the TENG triboelectric film are needed to overcome these problems. Therefore, this study discusses the role of the TiO2 nanofiller in cassava starch (CS) and polyvinyl alcohol (PVA) nanocomposite matrix that can increase triboelectricity through the formation of hydrogen bonds and the provision of oxygen-free electrons. The research method was to incorporate different concentrations of TiO2 nanoparticles (0%, 0.5%, 1%, 5%, 10% wt, and 15% wt) into the CS-PVA nanocomposite matrix using the solvent casting method. The results showed an increase in surface polarity which was more triboelectric-positive due to the CS-PVA hydroxyl group interacting with water molecules. Increasing the concentration above 5% wt TiO2 increases the density of the CS-PVA nanocomposite film which can significantly reduce water vapor permeability (WVP) and increase water resistance. The TENG performance of the CS-PVA/TiO2 nanocomposite film with a concentration of 15% wt TiO2 under conditions of high humidity (RH, 95%) resulted in an output voltage of 2.5-fold (~70.5 V to ~180 V), and the output current increased 2.6-fold (~5.2 ?A to ~13.7 ?A).\nABSTRAK: Persekitaran berkelembapan tinggi dapat mempercepatkan penghantaran, peneutralan, atau pelesapan cas geseran pada permukaan geseran filem nanopengeluaran triboelektrik pepejal (TENG), di mana mengurangkan pengeluaran tenaga. Sifat rintangan lembapan filem triboelektrik TENG diperlukan bagi mengatasi masalah ini. Oleh itu, kajian ini membincangkan peranan pengisi nano TiO2 dalam matriks nanokomposit kanji ubi kayu (CS) dan polivinil alkohol (PVA) yang dapat meningkatkan triboelektrik melalui pembentukan ikatan hidrogen dan bekalan elektron bebas oksigen. Kaedah kajian ini adalah dengan menggabungkan kepekatan nanozarah TiO2 berbeza (0%, 0.5%, 1%, 5%, 10%, dan 15%) ke dalam matriks nanokomposit CS-PVA menggunakan kaedah tuangan pelarut. Dapatan kajian menunjukkan peningkatan kekutuban permukaan yang lebih positif-triboelektrik adalah disebabkan oleh kumpulan hidroksil CS-PVA yang berinteraksi dengan molekul air. Pertambahan jisim kepekatan TiO2 melebihi 5% meningkatkan ketumpatan filem nanokomposit CS-PVA yang boleh mengurangkan kebolehtelapan wap air dan meningkatkan rintangan air dengan ketara. Prestasi TENG filem nanokomposit CS-PVA/TiO2 dengan jisim kepekatan TiO2 15% dalam keadaan berkelembapan tinggi (RH, 95%) menghasilkan voltan keluaran sebanyak 2.5 kali ganda (~70,5 V kepada ~ 180 V), dan arus keluaran meningkat 2.6 kali ganda (~ 5,2 ?A kepada ~ 13,7 ?A). ","PeriodicalId":13439,"journal":{"name":"IIUM Engineering Journal","volume":"16 1","pages":""},"PeriodicalIF":0.6000,"publicationDate":"2023-07-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IIUM Engineering Journal","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31436/iiumej.v24i2.2554","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0
Abstract
High humidity environments can accelerate the transmission, neutralization, or dissipation of frictional charges on the frictional surface of solid-solid triboelectric nanogenerator films (TENGs), which can reduce the output power. The moisture resistance properties of the TENG triboelectric film are needed to overcome these problems. Therefore, this study discusses the role of the TiO2 nanofiller in cassava starch (CS) and polyvinyl alcohol (PVA) nanocomposite matrix that can increase triboelectricity through the formation of hydrogen bonds and the provision of oxygen-free electrons. The research method was to incorporate different concentrations of TiO2 nanoparticles (0%, 0.5%, 1%, 5%, 10% wt, and 15% wt) into the CS-PVA nanocomposite matrix using the solvent casting method. The results showed an increase in surface polarity which was more triboelectric-positive due to the CS-PVA hydroxyl group interacting with water molecules. Increasing the concentration above 5% wt TiO2 increases the density of the CS-PVA nanocomposite film which can significantly reduce water vapor permeability (WVP) and increase water resistance. The TENG performance of the CS-PVA/TiO2 nanocomposite film with a concentration of 15% wt TiO2 under conditions of high humidity (RH, 95%) resulted in an output voltage of 2.5-fold (~70.5 V to ~180 V), and the output current increased 2.6-fold (~5.2 ?A to ~13.7 ?A).
ABSTRAK: Persekitaran berkelembapan tinggi dapat mempercepatkan penghantaran, peneutralan, atau pelesapan cas geseran pada permukaan geseran filem nanopengeluaran triboelektrik pepejal (TENG), di mana mengurangkan pengeluaran tenaga. Sifat rintangan lembapan filem triboelektrik TENG diperlukan bagi mengatasi masalah ini. Oleh itu, kajian ini membincangkan peranan pengisi nano TiO2 dalam matriks nanokomposit kanji ubi kayu (CS) dan polivinil alkohol (PVA) yang dapat meningkatkan triboelektrik melalui pembentukan ikatan hidrogen dan bekalan elektron bebas oksigen. Kaedah kajian ini adalah dengan menggabungkan kepekatan nanozarah TiO2 berbeza (0%, 0.5%, 1%, 5%, 10%, dan 15%) ke dalam matriks nanokomposit CS-PVA menggunakan kaedah tuangan pelarut. Dapatan kajian menunjukkan peningkatan kekutuban permukaan yang lebih positif-triboelektrik adalah disebabkan oleh kumpulan hidroksil CS-PVA yang berinteraksi dengan molekul air. Pertambahan jisim kepekatan TiO2 melebihi 5% meningkatkan ketumpatan filem nanokomposit CS-PVA yang boleh mengurangkan kebolehtelapan wap air dan meningkatkan rintangan air dengan ketara. Prestasi TENG filem nanokomposit CS-PVA/TiO2 dengan jisim kepekatan TiO2 15% dalam keadaan berkelembapan tinggi (RH, 95%) menghasilkan voltan keluaran sebanyak 2.5 kali ganda (~70,5 V kepada ~ 180 V), dan arus keluaran meningkat 2.6 kali ganda (~ 5,2 ?A kepada ~ 13,7 ?A).
高湿环境会加速摩擦电荷在固体-固体摩擦纳米发电机薄膜(TENGs)摩擦表面的传递、中和或耗散,从而降低输出功率。为了克服这些问题,需要提高TENG摩擦电膜的耐湿性能。因此,本研究探讨了TiO2纳米填料在木薯淀粉(CS)和聚乙烯醇(PVA)纳米复合基体中的作用,通过形成氢键和提供无氧电子来增加摩擦电。研究方法是采用溶剂浇铸法将不同浓度的TiO2纳米颗粒(0%、0.5%、1%、5%、10% wt和15% wt)加入CS-PVA纳米复合基体中。结果表明,由于CS-PVA羟基与水分子相互作用,表面极性增加,更具有摩擦电正电性。当TiO2浓度高于5% wt时,CS-PVA纳米复合膜的密度增加,可显著降低水蒸气渗透性(WVP),提高水阻。当TiO2浓度为15%时,CS-PVA/TiO2纳米复合膜在高湿(RH, 95%)条件下的TENG性能使输出电压增加2.5倍(~70.5 V至~180 V),输出电流增加2.6倍(~5.2 a至~13.7 a)。摘要:Persekitaran berkelembapan tinggi dapat mempercepatkan penghantaran, pentralan, atau pelesapan cas geseran padpermukaan geseran film nanopengeluaran triboelektrik pepejal (TENG), dimana mengurangkan peneluaran tenaga。Sifat rattan lembapan电影triboelektrik TENG diperlukan bagi mengatasi masalah ini。纳米二氧化钛材料纳米复合材料kanji ubi kayu (CS)和polivinil醇(PVA) yang dapat meningkatkan triboelektrik melalui pembentukan ikatan氢和bekalan elektron beksien。二氧化钛berbeza(0%、0.5%、1%、5%、10%、15%)的纳米复合材料CS-PVA menggunakan Kaedah tuangan pelarut。Dapatan kajian menunjukkan peningkatan kekutuban permukaan yang lebih positifi -triboelektrik adalah disebabkan oleh kumpulan hidroksil c - pva yang berinteraksi dengan molecular air。Pertambahan jisim kepekatan TiO2 melebihi 5% meningkatkan ketumpatan薄膜纳米复合材料CS-PVA yang boleh mengurangkan kebolehtelapan wap air dan meningkatkan rairan air dengan ketara。Prestasi TENG膜纳米复合材料CS-PVA/TiO2 dengan jisim kepekatan TiO2 15% dalam keadaan berkelembapan tinggi (RH, 95%) menghasilkan voltan keluaran sebanyak 2.5 kali ganda (~ 705,5 V kepada ~ 180 V), dan arus keluaran meningkat 2.6 kali ganda (~ 5,2 ?A kepada ~ 13,7 ?A)。
期刊介绍:
The IIUM Engineering Journal, published biannually (June and December), is a peer-reviewed open-access journal of the Faculty of Engineering, International Islamic University Malaysia (IIUM). The IIUM Engineering Journal publishes original research findings as regular papers, review papers (by invitation). The Journal provides a platform for Engineers, Researchers, Academicians, and Practitioners who are highly motivated in contributing to the Engineering disciplines, and Applied Sciences. It also welcomes contributions that address solutions to the specific challenges of the developing world, and address science and technology issues from an Islamic and multidisciplinary perspective. Subject areas suitable for publication are as follows: -Chemical and Biotechnology Engineering -Civil and Environmental Engineering -Computer Science and Information Technology -Electrical, Computer, and Communications Engineering -Engineering Mathematics and Applied Science -Materials and Manufacturing Engineering -Mechanical and Aerospace Engineering -Mechatronics and Automation Engineering