{"title":"气动力喷涂工艺参数对铜、锌、刚玉混合颗粒地层涂层的影响","authors":"V. E. Arhipov, G. Moskvitin, M. Pugachev","doi":"10.36652/1813-1336-2021-17-10-455-460","DOIUrl":null,"url":null,"abstract":"The results of a study of the effect of the spraying temperature and the overlap coefficient on the formation of the coating structure based on a mixture of Cu, Zn and Al2O3 particles applied by cold gas-dynamic spraying are presented. X-ray diffraction analysis has shown a decrease in the size of coherent scattering regions (CSR) from 200 nm to 90 nm for copper and to 64 nm for zinc when using an overlap coefficient of 55 % and more significant (up to 22 nm) with an overlap of 64 %. The CSR sizes of electronic type compounds CuZn3 (ε-phase) and Cu5 Zn8 (γ-phase) are quite close to the CSR size of zinc. The microdeformation of copper decreases from 187 to 119 % with an increase in the deposition temperature and does not depend on the overlap coefficient. For the electronic compound of the ε-phase, the microstrain value increases, and the γ-phase decreases by 2 times (from 0.31 to 0.17 %). The mass fraction of aluminum oxide (corundum) decreases from 5.4 to 2.2 % with an increase in the spraying temperature. The use of the maximum spraying temperature of 450 °C is accompanied by the formation of zinc oxide, the mass fraction of which is 4.3 % with 64 % overlap.","PeriodicalId":178558,"journal":{"name":"Strengthening Technologies and Coatings","volume":"11 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Technological parameters of gas-dynamic spraying affecting the formation coating based on mixture of particles copper, zinc and corundum\",\"authors\":\"V. E. Arhipov, G. Moskvitin, M. Pugachev\",\"doi\":\"10.36652/1813-1336-2021-17-10-455-460\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The results of a study of the effect of the spraying temperature and the overlap coefficient on the formation of the coating structure based on a mixture of Cu, Zn and Al2O3 particles applied by cold gas-dynamic spraying are presented. X-ray diffraction analysis has shown a decrease in the size of coherent scattering regions (CSR) from 200 nm to 90 nm for copper and to 64 nm for zinc when using an overlap coefficient of 55 % and more significant (up to 22 nm) with an overlap of 64 %. The CSR sizes of electronic type compounds CuZn3 (ε-phase) and Cu5 Zn8 (γ-phase) are quite close to the CSR size of zinc. The microdeformation of copper decreases from 187 to 119 % with an increase in the deposition temperature and does not depend on the overlap coefficient. For the electronic compound of the ε-phase, the microstrain value increases, and the γ-phase decreases by 2 times (from 0.31 to 0.17 %). The mass fraction of aluminum oxide (corundum) decreases from 5.4 to 2.2 % with an increase in the spraying temperature. The use of the maximum spraying temperature of 450 °C is accompanied by the formation of zinc oxide, the mass fraction of which is 4.3 % with 64 % overlap.\",\"PeriodicalId\":178558,\"journal\":{\"name\":\"Strengthening Technologies and Coatings\",\"volume\":\"11 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1900-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Strengthening Technologies and Coatings\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.36652/1813-1336-2021-17-10-455-460\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Strengthening Technologies and Coatings","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.36652/1813-1336-2021-17-10-455-460","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Technological parameters of gas-dynamic spraying affecting the formation coating based on mixture of particles copper, zinc and corundum
The results of a study of the effect of the spraying temperature and the overlap coefficient on the formation of the coating structure based on a mixture of Cu, Zn and Al2O3 particles applied by cold gas-dynamic spraying are presented. X-ray diffraction analysis has shown a decrease in the size of coherent scattering regions (CSR) from 200 nm to 90 nm for copper and to 64 nm for zinc when using an overlap coefficient of 55 % and more significant (up to 22 nm) with an overlap of 64 %. The CSR sizes of electronic type compounds CuZn3 (ε-phase) and Cu5 Zn8 (γ-phase) are quite close to the CSR size of zinc. The microdeformation of copper decreases from 187 to 119 % with an increase in the deposition temperature and does not depend on the overlap coefficient. For the electronic compound of the ε-phase, the microstrain value increases, and the γ-phase decreases by 2 times (from 0.31 to 0.17 %). The mass fraction of aluminum oxide (corundum) decreases from 5.4 to 2.2 % with an increase in the spraying temperature. The use of the maximum spraying temperature of 450 °C is accompanied by the formation of zinc oxide, the mass fraction of which is 4.3 % with 64 % overlap.