{"title":"Al2O3/Si3N4双层栅介质AlGaN/GaN miss - hemts中热载子降解的提取方法及机理分析","authors":"Jen-Wei Huang;Po-Hsun Chen;Tsung-Han Yeh;Xin-Ying Tsai;Pei-Yu Wu","doi":"10.1109/TDMR.2023.3312667","DOIUrl":null,"url":null,"abstract":"High-electron-mobility transistor (HEMT) based on Gallium Nitride (GaN) material is often designed for high-voltage operating conditions because of the high electric critical field of GaN material. However, such devices are often prone to the hot carrier stress (HCS) effect under high drain voltage and on-state conditions. Therefore, the HCS effect is an important consideration for reliable GaN HEMT devices. The Al2O3/Si3N4 bilayer gate dielectric AlGaN/GaN metal–insulator–semiconductor (MIS) HEMT has many advantages such as low gate leakage current and interface defects. However, the degradation phenomena observed in this device under HCS is very different from those of Si3N4 MIS HEMTs discussed in several reported studies. In this work, the HCS degradation results of Si3N4 MIS HEMTs and Al2O3/Si3N4 bilayer MIS HEMTs are both investigated and compared. The HCS degradations in Al2O3/Si3N4 bilayer MIS HEMTs are also examined and illustrated in depth. Finally, different stress voltage conditions of HCS are applied and the C-V measurements are carried out in order to confirm the degradation behaviors of MIS HEMT device.","PeriodicalId":448,"journal":{"name":"IEEE Transactions on Device and Materials Reliability","volume":"23 4","pages":"510-515"},"PeriodicalIF":2.5000,"publicationDate":"2023-09-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Analysis of the Extraction Method and Mechanism of Hot Carrier Degradation in Al2O3/Si3N4 Bilayer Gate Dielectric AlGaN/GaN MIS-HEMTs\",\"authors\":\"Jen-Wei Huang;Po-Hsun Chen;Tsung-Han Yeh;Xin-Ying Tsai;Pei-Yu Wu\",\"doi\":\"10.1109/TDMR.2023.3312667\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"High-electron-mobility transistor (HEMT) based on Gallium Nitride (GaN) material is often designed for high-voltage operating conditions because of the high electric critical field of GaN material. However, such devices are often prone to the hot carrier stress (HCS) effect under high drain voltage and on-state conditions. Therefore, the HCS effect is an important consideration for reliable GaN HEMT devices. The Al2O3/Si3N4 bilayer gate dielectric AlGaN/GaN metal–insulator–semiconductor (MIS) HEMT has many advantages such as low gate leakage current and interface defects. However, the degradation phenomena observed in this device under HCS is very different from those of Si3N4 MIS HEMTs discussed in several reported studies. In this work, the HCS degradation results of Si3N4 MIS HEMTs and Al2O3/Si3N4 bilayer MIS HEMTs are both investigated and compared. The HCS degradations in Al2O3/Si3N4 bilayer MIS HEMTs are also examined and illustrated in depth. Finally, different stress voltage conditions of HCS are applied and the C-V measurements are carried out in order to confirm the degradation behaviors of MIS HEMT device.\",\"PeriodicalId\":448,\"journal\":{\"name\":\"IEEE Transactions on Device and Materials Reliability\",\"volume\":\"23 4\",\"pages\":\"510-515\"},\"PeriodicalIF\":2.5000,\"publicationDate\":\"2023-09-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IEEE Transactions on Device and Materials Reliability\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://ieeexplore.ieee.org/document/10251398/\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE Transactions on Device and Materials Reliability","FirstCategoryId":"5","ListUrlMain":"https://ieeexplore.ieee.org/document/10251398/","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0
摘要
基于氮化镓(GaN)材料的高电子迁移率晶体管(HEMT)通常被设计用于高压工作条件,因为氮化镓(GaN)材料具有高电临界场。然而,这种器件在高漏极电压和导通状态下往往容易产生热载流子应力(HCS)效应。因此,HCS效应是可靠GaN HEMT器件的重要考虑因素。Al2O3/Si3N4双层栅介质AlGaN/GaN金属绝缘体半导体HEMT具有栅漏电流小、界面缺陷少等优点。然而,该装置在HCS下观察到的降解现象与一些报道中讨论的Si3N4 MIS hemt有很大不同。本文对Si3N4 MIS hemt和Al2O3/Si3N4双层MIS hemt的HCS降解结果进行了研究和比较。HCS在Al2O3/Si3N4双层MIS hemt中的降解也进行了深入的研究和说明。最后,采用不同的HCS应力电压条件,进行了C-V测量,以确定MIS HEMT器件的退化行为。
Analysis of the Extraction Method and Mechanism of Hot Carrier Degradation in Al2O3/Si3N4 Bilayer Gate Dielectric AlGaN/GaN MIS-HEMTs
High-electron-mobility transistor (HEMT) based on Gallium Nitride (GaN) material is often designed for high-voltage operating conditions because of the high electric critical field of GaN material. However, such devices are often prone to the hot carrier stress (HCS) effect under high drain voltage and on-state conditions. Therefore, the HCS effect is an important consideration for reliable GaN HEMT devices. The Al2O3/Si3N4 bilayer gate dielectric AlGaN/GaN metal–insulator–semiconductor (MIS) HEMT has many advantages such as low gate leakage current and interface defects. However, the degradation phenomena observed in this device under HCS is very different from those of Si3N4 MIS HEMTs discussed in several reported studies. In this work, the HCS degradation results of Si3N4 MIS HEMTs and Al2O3/Si3N4 bilayer MIS HEMTs are both investigated and compared. The HCS degradations in Al2O3/Si3N4 bilayer MIS HEMTs are also examined and illustrated in depth. Finally, different stress voltage conditions of HCS are applied and the C-V measurements are carried out in order to confirm the degradation behaviors of MIS HEMT device.
期刊介绍:
The scope of the publication includes, but is not limited to Reliability of: Devices, Materials, Processes, Interfaces, Integrated Microsystems (including MEMS & Sensors), Transistors, Technology (CMOS, BiCMOS, etc.), Integrated Circuits (IC, SSI, MSI, LSI, ULSI, ELSI, etc.), Thin Film Transistor Applications. The measurement and understanding of the reliability of such entities at each phase, from the concept stage through research and development and into manufacturing scale-up, provides the overall database on the reliability of the devices, materials, processes, package and other necessities for the successful introduction of a product to market. This reliability database is the foundation for a quality product, which meets customer expectation. A product so developed has high reliability. High quality will be achieved because product weaknesses will have been found (root cause analysis) and designed out of the final product. This process of ever increasing reliability and quality will result in a superior product. In the end, reliability and quality are not one thing; but in a sense everything, which can be or has to be done to guarantee that the product successfully performs in the field under customer conditions. Our goal is to capture these advances. An additional objective is to focus cross fertilized communication in the state of the art of reliability of electronic materials and devices and provide fundamental understanding of basic phenomena that affect reliability. In addition, the publication is a forum for interdisciplinary studies on reliability. An overall goal is to provide leading edge/state of the art information, which is critically relevant to the creation of reliable products.