Test bench development and implementation for experimental determination of mechanical losses in single cylinder internal combustion engines

As mechanical efficiency has great relevance in the alternative engine performance, the authors research in the development of testing facilities to characterize the sources of engine mechanical losses. The present paper deals with the realization of a hardware platform to conduct experimental studies in small combustion engines to experimentally characterize the mechanical losses of a single-cylinder internal combustion engine by means of the indicated diagram and motoring methods. The system was completed by means of an electrical motor-generator coupled to a single-cylinder air-cooled spark ignition engine, a self-developed electronic hardware control, and a PC-based instrumentation and data acquisition system. Specifications of load-motoring-starting system, including the description of the proprietary electronic load regulation system, are detailed. Also, the instrumentation system of in-cylinder and intake pressures; Temperatures of intake air, exhaust gases, lubricant oil, and engine block; effective torque and crankshaft position are described, including the signal acquisition system. The methodologies for indicated diagram and motoring method are described, mentioning the required measurements to apply each method and the engine load-temperature considerations when an engine is tested in fired or motored conditions. The platform was used to study the mechanical losses of the engine under motored and fired conditions under a wide range of rotational speeds and throttle openings, allowing to draw conclusions about the operating features of the developed test bench in itself, and also about the mechanical losses of the engine tested. Initially, samples of cylinder pressure, torque, intake pressure as function of crank angle and indicate diagram were obtained, showing similar waveforms present in related literature. Then, variations of the aforementioned temperatures against rotation speed and throttle opening and results for the mechanical losses determined by indicated diagram and motoring methods are shown. Finally, two empirical correlations are proposed to estimate the mechanical losses. In the future the hardware platform will be utilized to investigate in-cylinder engine parameters, detailed thermal and mechanical engine performance