A Classical Molecular Dynamics Study of the Effect of the Atomic Force Microscope Tip Shape, Size and Deformation on the Tribological Properties of the Graphene/Au(111) Interface

Atomic force microscopes are used, besides their principal function as surface imaging tools, in the surface manipulation and measurement of interfacial properties. In particular, they can be modified to measure lateral friction forces that occur during the sliding of the tip against the underlying substrate. However, the shape, size, and deformation of the tips profoundly affect the measurements in a manner that is difficult to predict. In this work, we investigate the contribution of these effect to the magnitude of the lateral forces during sliding. The surface substrate is chosen to be a few-layer AB-stacked graphene surface, whereas the tip is initially constructed from face-centered cubic gold. In order to separate the effect of deformation from the shape, the rigid tips of three different shapes were considered first, namely, a cone, a pyramid and a hemisphere. The shape was seen to dictate all aspects of the interface during sliding, from temperature dependence to stick–slip behavior. Deformation was investigated next by comparing a rigid hemispherical tip to one of an identical shape and size but with all but the top three layers of atoms being free to move. The deformation, as also verified by an indentation analysis, occurs by means of the lower layers collapsing on the upper ones, thereby increasing the contact area. This collapse mitigates the friction force and decreases it with respect to the rigid tip for the same vertical distance. Finally, the size effect is studied by means of calculating the friction forces for a much larger hemispherical tip whose atoms are free to move. In this case, the deformation is found to be much smaller, but the stick–slip behavior is much more clearly seen.