Effect of thermal cycling on the isotropic consolidation and triaxial shear behavior of lateritic clay

It is crucial to comprehend soil thermomechanical behavior while designing underground energy structures to ensure safety. Studies on the soil response to thermal cycles in terms of the generation of thermal-induced volume change and pore water pressure are rare, and relevant research on how these responses might affect soil consolidation parameters and shear strength is very limited. To experimentally investigate the effect of thermal cycling under drained and undrained conditions on the isotropic consolidation parameters and triaxial shear strength of lateritic clay, this paper employs a temperature-controlled triaxial apparatus to conduct a series of isotropic mechanical consolidation and thermal consolidation tests, as well as undrained triaxial shear tests. The thermal response in volume change and pore water pressure are discussed, and the changes in the consolidation parameters, the preconsolidation pressure, and the shear strength are identified. It is concluded that increments of irreversible contraction of lateritic clay are observed during thermal cycling under drained conditions and further lead to a slight increase in the preconsolidation pressure. Nevertheless, thermal cycling hardly affects the swelling and compression index. The shear strength increases after being subjected to thermal cycling under drained conditions, which can be attributed to the increase in cohesion. When drainage is not allowed during thermal cycling, the generation of pore water pressure occurs during temperature variations and completely dissipates after the thermal cycling phase, and its reversibility is unaffected by the stress level and number of cycles. Furthermore, thermal cycling has little effect on the consolidation parameters, preconsolidation pressure, and shear strength. This study provides new insights into the mechanisms controlling the response of clay to thermal cycling.