Research on Flare Burner for Venting in Gas Transmission Station

With the widespread application of natural gas, the venting of remaining natural gas is an issue that cannot be ignored. Direct venting causes serious environmental pollution, so thermal venting, also known as combustion venting, has become an important way to solve environmental pollution problems. This simulation first established two different types of burners, cluster and array, to quantitatively analyze the flame combustion characteristics. It simulated the distribution patterns of velocity, temperature, and key component concentrations of the two burners under the same number of holes and fuel flow rate. The research results indicate that due to the existence of oblique jet flow in the converging and array types, a reflux zone is formed at the outlet of the diffuser, and natural gas and air are mixed more thoroughly, resulting in a more stable flame. By comparing the burnout rate and combustion failure rate of the two types of burners, it was found that the convergent flame height and residual natural gas content during combustion were the lowest, resulting in better combustion efficiency. On this basis, while ensuring the same flow rate, the number of converging combustion holes was increased, the model parameters were improved, and it was found that the flame height was further reduced. At the same time, while maintaining the combustion removal rate, the burnout rate was improved. The development of the above-mentioned flare burner is of great significance in improving combustion efficiency, reducing flame height, and reducing environmental pollution caused by venting.