Pub Date : 2024-06-04DOI: 10.56028/aetr.10.1.765.2024
Yan Chen, Shengxing Zhang, Lei Tang
The excessive elevation of the phreatic lines under continuous high-water levels is the cause of many dangerous situations in embankments. Therefore, accurately understanding the dynamic changes in the infiltration characteristics of embankments is of great significance for judging and evaluating the stability of engineering. This study conducted indoor model experiments and used ground penetrating radar to detect the phreatic lines of soil. By comparing the radar detection results with the measured position of the phreatic lines, it was determined that the phreatic lines appeared as a continuous strong reflection surface with similar shapes in the radargram, and the reflection below the reflection surface became weaker. Through time-domain analysis of the single waveform at different time points, it was found that the amplitude of the reflected wave at the saturation line was larger, and the energy attenuation below the saturation line was faster, resulting in a rapid decrease in amplitude; perform Fourier transform on a single channel signal to obtain a spectrogram, and perform frequency domain analysis on it. The main frequency is around 600MHz, and the second main frequency is around 900MHz. As the saturation line rises, the main frequency gradually shifts towards lower frequencies.
{"title":"Research on Response Characteristics of GPR Method for Detecting Phreatic Lines in Embankments","authors":"Yan Chen, Shengxing Zhang, Lei Tang","doi":"10.56028/aetr.10.1.765.2024","DOIUrl":"https://doi.org/10.56028/aetr.10.1.765.2024","url":null,"abstract":"The excessive elevation of the phreatic lines under continuous high-water levels is the cause of many dangerous situations in embankments. Therefore, accurately understanding the dynamic changes in the infiltration characteristics of embankments is of great significance for judging and evaluating the stability of engineering. This study conducted indoor model experiments and used ground penetrating radar to detect the phreatic lines of soil. By comparing the radar detection results with the measured position of the phreatic lines, it was determined that the phreatic lines appeared as a continuous strong reflection surface with similar shapes in the radargram, and the reflection below the reflection surface became weaker. Through time-domain analysis of the single waveform at different time points, it was found that the amplitude of the reflected wave at the saturation line was larger, and the energy attenuation below the saturation line was faster, resulting in a rapid decrease in amplitude; perform Fourier transform on a single channel signal to obtain a spectrogram, and perform frequency domain analysis on it. The main frequency is around 600MHz, and the second main frequency is around 900MHz. As the saturation line rises, the main frequency gradually shifts towards lower frequencies.","PeriodicalId":355471,"journal":{"name":"Advances in Engineering Technology Research","volume":"3 10","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141266817","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-05-14DOI: 10.56028/aetr.10.1.753.2024
Mingyu An, Daolong Yuan, Suyang Liu, Jialei Ding
Based on each index of glass samples, the indexes of all kinds of glass sample cluster analysis, and the class divide, it is to predict the chemical composition of glass samples which before weathering, the unknown glass samples for testing, and a correlation analysis of chemical composition in glass samples was carried out through the appropriate method. As for the relationship between the weathering degree of cultural relics surface and the type, ornamentation and color of glass samples, the weathering degree and the type, ornamentation and color of glass samples were corresponding to unilateral factors, and the relationship was preliminarily explored by bar charts. It was concluded that the weathering degree had a certain multiple relationship with the three indexes. In order to further study the relationship quantitatively, we used the correlation thermogram to analyze. It can be concluded that the type of cultural relics has the strongest correlation with surface weathering, the correlation degree reaches 0.4, while the correlation of color and ornamentation are 0.013 and 0.12, which are relatively low.
{"title":"Research on the composition of glass relics based on CART model","authors":"Mingyu An, Daolong Yuan, Suyang Liu, Jialei Ding","doi":"10.56028/aetr.10.1.753.2024","DOIUrl":"https://doi.org/10.56028/aetr.10.1.753.2024","url":null,"abstract":"Based on each index of glass samples, the indexes of all kinds of glass sample cluster analysis, and the class divide, it is to predict the chemical composition of glass samples which before weathering, the unknown glass samples for testing, and a correlation analysis of chemical composition in glass samples was carried out through the appropriate method. As for the relationship between the weathering degree of cultural relics surface and the type, ornamentation and color of glass samples, the weathering degree and the type, ornamentation and color of glass samples were corresponding to unilateral factors, and the relationship was preliminarily explored by bar charts. It was concluded that the weathering degree had a certain multiple relationship with the three indexes. In order to further study the relationship quantitatively, we used the correlation thermogram to analyze. It can be concluded that the type of cultural relics has the strongest correlation with surface weathering, the correlation degree reaches 0.4, while the correlation of color and ornamentation are 0.013 and 0.12, which are relatively low.","PeriodicalId":355471,"journal":{"name":"Advances in Engineering Technology Research","volume":"95 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140978561","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-05-14DOI: 10.56028/aetr.10.1.759.2024
Yiheng Lan
This paper mainly analyzes and identifies ancient glass products based on the surface characteristics and chemical composition content of ancient glass products, preprocesses the given data, establishes relevant statistical models, and uses SPSS, MATLAB, PyCharm and other software to perform statistical analysis on the surface of ancient glass. Weathering chemical composition law. To classify ancient glass types, we used the BP neural network classification prediction model to train, and the classification rules obtained depended on the difference of chemical composition content, and we tested the places where there was an accuracy dispute between the two. The classification of subclasses is based on the index evaluation using the method of hierarchy-entropy weight-coefficient of variation. The chemical components of potassium oxide and lead oxide are used to subclassify different ancient glass types. According to the evaluation results, it is proved that they are reasonable, and then the classification is made. Sensitivity analysis was performed on the results, and OAT was used to adjust its parameters to achieve the best subclassification effect.
本文主要根据古玻璃制品的表面特征和化学成分含量对古玻璃制品进行分析鉴定，对给定数据进行预处理，建立相关统计模型，并利用SPSS、MATLAB、PyCharm等软件对古玻璃表面进行统计分析。风化化学成分规律。为了对古玻璃类型进行分类，我们采用 BP 神经网络分类预测模型进行训练，得到的分类规则取决于化学成分含量的差异，并对两者存在准确率争议的地方进行测试。子类的分类基于指标评价，采用层次-熵权-变异系数的方法。利用氧化钾和氧化铅的化学成分对不同的古代玻璃类型进行子分类。根据评价结果，证明它们是合理的，然后进行分类。对结果进行了灵敏度分析，并利用 OAT 调整其参数，以达到最佳的细分效果。
{"title":"Research on component content model of ancient glass products based on statistical analysis","authors":"Yiheng Lan","doi":"10.56028/aetr.10.1.759.2024","DOIUrl":"https://doi.org/10.56028/aetr.10.1.759.2024","url":null,"abstract":"This paper mainly analyzes and identifies ancient glass products based on the surface characteristics and chemical composition content of ancient glass products, preprocesses the given data, establishes relevant statistical models, and uses SPSS, MATLAB, PyCharm and other software to perform statistical analysis on the surface of ancient glass. Weathering chemical composition law. To classify ancient glass types, we used the BP neural network classification prediction model to train, and the classification rules obtained depended on the difference of chemical composition content, and we tested the places where there was an accuracy dispute between the two. The classification of subclasses is based on the index evaluation using the method of hierarchy-entropy weight-coefficient of variation. The chemical components of potassium oxide and lead oxide are used to subclassify different ancient glass types. According to the evaluation results, it is proved that they are reasonable, and then the classification is made. Sensitivity analysis was performed on the results, and OAT was used to adjust its parameters to achieve the best subclassification effect.","PeriodicalId":355471,"journal":{"name":"Advances in Engineering Technology Research","volume":"32 33","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140980253","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-05-06DOI: 10.56028/aetr.10.1.746.2024
Feifei Pei
In the rapid development of the theory of big data technology, people in the pursuit of the unique beauty of natural landscape at the same time, the design and transformation of rural art space put forward higher requirements, research scholars in the practice of research, the use of big data information transmission can be more intuitive expression of the pattern of people and landscape. According to the transformation of rural art space design in recent years, rural space, as a basic component of environmental landscape design, has begun to develop towards the direction of diversification, multi-level and digitalization under the influence of big data technology theory. Based on the understanding of the research status of big data technology, according to the basic requirements of rural art space design and transformation, this paper deeply discusses the practical significance of big data for rural art space design and transformation, in order to provide technical support for the creation of high-quality natural landscape in the new era.
{"title":"The Significance of Big Data to the Design and Transformation of Rural Art Space","authors":"Feifei Pei","doi":"10.56028/aetr.10.1.746.2024","DOIUrl":"https://doi.org/10.56028/aetr.10.1.746.2024","url":null,"abstract":"In the rapid development of the theory of big data technology, people in the pursuit of the unique beauty of natural landscape at the same time, the design and transformation of rural art space put forward higher requirements, research scholars in the practice of research, the use of big data information transmission can be more intuitive expression of the pattern of people and landscape. According to the transformation of rural art space design in recent years, rural space, as a basic component of environmental landscape design, has begun to develop towards the direction of diversification, multi-level and digitalization under the influence of big data technology theory. Based on the understanding of the research status of big data technology, according to the basic requirements of rural art space design and transformation, this paper deeply discusses the practical significance of big data for rural art space design and transformation, in order to provide technical support for the creation of high-quality natural landscape in the new era.","PeriodicalId":355471,"journal":{"name":"Advances in Engineering Technology Research","volume":"32 3‐4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141006722","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-03-26DOI: 10.56028/aetr.9.1.888.2024
Rui Han
To investigate the structural dynamic characteristics of a beam-arch composite continuous rigid structure bridge under the action of parallel moving loads on a multi-lane highway, a joint simulation analysis program based on Easy Language and ANSYS was developed. This study was conducted using a six-span beam-arch composite continuous rigid structure bridge located in Shaanxi Province as the reference project. The research focused on the most adverse dynamic coupled responses of the main beam midspan, arch crown, and suspension rods caused by double-axle cars, double-axle trucks, and three-axle trucks on a single-direction three-lane road surface.
为研究多车道高速公路平行移动荷载作用下梁拱组合连续刚构桥的结构动力特性，开发了基于 Easy Language 和 ANSYS 的联合仿真分析程序。该研究以陕西省的一座六跨梁拱组合连续刚构桥为参考项目。研究重点是在单向三车道路面上，双轴汽车、双轴卡车和三轴卡车对主梁中跨、拱顶和悬杆造成的最不利动态耦合响应。
{"title":"Coupled Vibration Analysis of a Beam-Arch Composite Continuous Rigid Structure with Parallel Traffic Flow","authors":"Rui Han","doi":"10.56028/aetr.9.1.888.2024","DOIUrl":"https://doi.org/10.56028/aetr.9.1.888.2024","url":null,"abstract":"To investigate the structural dynamic characteristics of a beam-arch composite continuous rigid structure bridge under the action of parallel moving loads on a multi-lane highway, a joint simulation analysis program based on Easy Language and ANSYS was developed. This study was conducted using a six-span beam-arch composite continuous rigid structure bridge located in Shaanxi Province as the reference project. The research focused on the most adverse dynamic coupled responses of the main beam midspan, arch crown, and suspension rods caused by double-axle cars, double-axle trucks, and three-axle trucks on a single-direction three-lane road surface.","PeriodicalId":355471,"journal":{"name":"Advances in Engineering Technology Research","volume":"120 23","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140380201","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-02-26DOI: 10.56028/aetr.9.1.873.2024
Longfei Xue, Bingnan Yang, Fan Yang, Xue Li
To explore the development of China's energy power generation enterprises, undertake reasonable resource allocation and optimization, and promote sustainable development. We apply an index calculation approach within the data envelopment analysis framework, collecting data from 50 enterprises in 2007-2022, resulting in a total of 800 observations (16*50) for the in-depth analysis of productivity decomposition. The results highlight that during the study years, the sample enterprises experienced the following changes on average per year: an increase of 0.244% in efficiency change (effch), a decline of 0.293% in technical progress (techch), an increase of 0.119% in pure efficiency change (pech), an increase of 0.134% in scale efficiency change (sech), and a decline of 0.057% in total factor of productivity (tfpch). These findings suggest an ongoing improvement in overall efficiency, indicating that energy generators are achieving better results in terms of operations, resource utilization, and scale effects, but need to focus on research and adoption of new technologies while seeking opportunities to further enhance productivity.
{"title":"Productivity Decomposition of Chinese Energy Generation Enterprises: an Index Calculation Approach Embedded in the Data Envelopment Analysis Framework","authors":"Longfei Xue, Bingnan Yang, Fan Yang, Xue Li","doi":"10.56028/aetr.9.1.873.2024","DOIUrl":"https://doi.org/10.56028/aetr.9.1.873.2024","url":null,"abstract":"To explore the development of China's energy power generation enterprises, undertake reasonable resource allocation and optimization, and promote sustainable development. We apply an index calculation approach within the data envelopment analysis framework, collecting data from 50 enterprises in 2007-2022, resulting in a total of 800 observations (16*50) for the in-depth analysis of productivity decomposition. The results highlight that during the study years, the sample enterprises experienced the following changes on average per year: an increase of 0.244% in efficiency change (effch), a decline of 0.293% in technical progress (techch), an increase of 0.119% in pure efficiency change (pech), an increase of 0.134% in scale efficiency change (sech), and a decline of 0.057% in total factor of productivity (tfpch). These findings suggest an ongoing improvement in overall efficiency, indicating that energy generators are achieving better results in terms of operations, resource utilization, and scale effects, but need to focus on research and adoption of new technologies while seeking opportunities to further enhance productivity.","PeriodicalId":355471,"journal":{"name":"Advances in Engineering Technology Research","volume":"201 S604","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140428100","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-02-26DOI: 10.56028/aetr.9.1.868.2024
Weiyu Lin, Ziwei Chen
Falls constitute a significant health risk, particularly among the elderly, thus prompting the introduction of various wearable devices capable of fall detection. However, the majority of these devices prioritize accuracy over wearer comfort, which significantly influences user adherence and, by extension, the broader development of wearable technologies. Addressing this oversight, this review first summarizes the current methods for predicting the comfort of wearable devices, evaluating them in terms of feasibility and accuracy, reliability and effectiveness, as well as safety and privacy. Subsequently, building upon the evaluation of existing methods, this review proposes a predictive solution based on the XGBoost algorithm.
{"title":"Comfort Prediction Method for Wearable Devices: Current Progress and Future Direction","authors":"Weiyu Lin, Ziwei Chen","doi":"10.56028/aetr.9.1.868.2024","DOIUrl":"https://doi.org/10.56028/aetr.9.1.868.2024","url":null,"abstract":"Falls constitute a significant health risk, particularly among the elderly, thus prompting the introduction of various wearable devices capable of fall detection. However, the majority of these devices prioritize accuracy over wearer comfort, which significantly influences user adherence and, by extension, the broader development of wearable technologies. Addressing this oversight, this review first summarizes the current methods for predicting the comfort of wearable devices, evaluating them in terms of feasibility and accuracy, reliability and effectiveness, as well as safety and privacy. Subsequently, building upon the evaluation of existing methods, this review proposes a predictive solution based on the XGBoost algorithm.","PeriodicalId":355471,"journal":{"name":"Advances in Engineering Technology Research","volume":"55 21","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140431151","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-02-26DOI: 10.56028/aetr.9.1.858.2024
Hong Zhou
In response to the shortcomings of the current RPL routing protocol, fully utilizing the idea of opportunistic routing, this study proposes an improved RPL routing protocol node mobility switching method to enhance the mobility support of wireless sensor IPv6 networks. Analyze existing RPL routing protocol solutions and identify their shortcomings; Analyze the challenges encountered in designing and improving routing protocols, and based on the specific application of RPL in 6LoWPAN technology, propose an overall design concept for the mobile switching method of an improved RPL routing protocol; Then, specific design will be carried out for the improved routing protocol mobile switching method, including mobile node detection, discovery and selection of the optimal parent node, link switching, etc; Finally, simulation implementation is carried out to verify its low energy consumption and low latency. Its research content involves disciplines such as the Internet of Things, computer simulation technology, and computer network technology, and has high theoretical and practical value.
{"title":"Research on Improvement and Optimization Design of Mobile Switching in RPL Routing Protocol","authors":"Hong Zhou","doi":"10.56028/aetr.9.1.858.2024","DOIUrl":"https://doi.org/10.56028/aetr.9.1.858.2024","url":null,"abstract":"In response to the shortcomings of the current RPL routing protocol, fully utilizing the idea of opportunistic routing, this study proposes an improved RPL routing protocol node mobility switching method to enhance the mobility support of wireless sensor IPv6 networks. Analyze existing RPL routing protocol solutions and identify their shortcomings; Analyze the challenges encountered in designing and improving routing protocols, and based on the specific application of RPL in 6LoWPAN technology, propose an overall design concept for the mobile switching method of an improved RPL routing protocol; Then, specific design will be carried out for the improved routing protocol mobile switching method, including mobile node detection, discovery and selection of the optimal parent node, link switching, etc; Finally, simulation implementation is carried out to verify its low energy consumption and low latency. Its research content involves disciplines such as the Internet of Things, computer simulation technology, and computer network technology, and has high theoretical and practical value.","PeriodicalId":355471,"journal":{"name":"Advances in Engineering Technology Research","volume":"18 9","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140430170","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-02-26DOI: 10.56028/aetr.9.1.852.2024
Lei Hua
In this paper, a hybrid encryption algorithm based on AES and 3DES is proposed to improve the security of data transmission in human resources and social security informatization. We first analyze the advantages and disadvantages of AES and 3DES, and then elaborate on why the two algorithms are used in combination. Then, this paper discusses the implementation process and mathematical principle of the hybrid algorithm. Finally, we implement the hybrid algorithm in the C + + language and present an application example.
{"title":"Application of AES and 3DES Hybrid Encryption Algorithm Based on Optimized S Box in the Data Transmission of Human Resources and Social Security Informatization","authors":"Lei Hua","doi":"10.56028/aetr.9.1.852.2024","DOIUrl":"https://doi.org/10.56028/aetr.9.1.852.2024","url":null,"abstract":"In this paper, a hybrid encryption algorithm based on AES and 3DES is proposed to improve the security of data transmission in human resources and social security informatization. We first analyze the advantages and disadvantages of AES and 3DES, and then elaborate on why the two algorithms are used in combination. Then, this paper discusses the implementation process and mathematical principle of the hybrid algorithm. Finally, we implement the hybrid algorithm in the C + + language and present an application example.","PeriodicalId":355471,"journal":{"name":"Advances in Engineering Technology Research","volume":"172 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140428825","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-02-26DOI: 10.56028/aetr.9.1.862.2024
Lingli Fang, Junye Zhang, Haoran Shi
Spray painting wastewater is industrial wastewater created during the painting process; its composition is complicated, comprising a significant number of difficult biodegradable organic matter; nevertheless, the existing technology is not optimal, and the process cannot reach the desired criteria. The water quality of the entry has a higher demand for investment and occupying a vast land. High maintenance expenses, high water quality after treatment, and other issues exist. In this study, the oily spray paint wastewater was treated using an electrochemical and Fenton process, which has a high oxidation capacity, a fast oxidation rate, and a wide application of the characteristics of the Electro-Fenton process used in the pretreatment of spray paint wastewater. This study focuses on the electrochemical optimization and improvement of the Fenton technique, and it employs Fe2+ and H2O2 generated by the electrochemical approach as a continuous source of Fenton reagent. Simultaneously, electrode-related oxidation may destroy organic matter, effectively reducing the concentration of organic matter in spray paint wastewater, and when paired with the traditional Sequencing Batch Reactor Activated Sludge Process (SBR) operation treatment mode, offers a comprehensive process idea. While improving the efficiency and quality of spray paint wastewater treatment, the cost should be kept as low as feasible in order to provide effective reference schemes for spray paint wastewater treatment, allowing for future study.
{"title":"Treatment of Spray Paint Wastewater by a Coupled Electro-Fenton and SBR Technology","authors":"Lingli Fang, Junye Zhang, Haoran Shi","doi":"10.56028/aetr.9.1.862.2024","DOIUrl":"https://doi.org/10.56028/aetr.9.1.862.2024","url":null,"abstract":"Spray painting wastewater is industrial wastewater created during the painting process; its composition is complicated, comprising a significant number of difficult biodegradable organic matter; nevertheless, the existing technology is not optimal, and the process cannot reach the desired criteria. The water quality of the entry has a higher demand for investment and occupying a vast land. High maintenance expenses, high water quality after treatment, and other issues exist. In this study, the oily spray paint wastewater was treated using an electrochemical and Fenton process, which has a high oxidation capacity, a fast oxidation rate, and a wide application of the characteristics of the Electro-Fenton process used in the pretreatment of spray paint wastewater. This study focuses on the electrochemical optimization and improvement of the Fenton technique, and it employs Fe2+ and H2O2 generated by the electrochemical approach as a continuous source of Fenton reagent. Simultaneously, electrode-related oxidation may destroy organic matter, effectively reducing the concentration of organic matter in spray paint wastewater, and when paired with the traditional Sequencing Batch Reactor Activated Sludge Process (SBR) operation treatment mode, offers a comprehensive process idea. While improving the efficiency and quality of spray paint wastewater treatment, the cost should be kept as low as feasible in order to provide effective reference schemes for spray paint wastewater treatment, allowing for future study.","PeriodicalId":355471,"journal":{"name":"Advances in Engineering Technology Research","volume":"7 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140430557","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：