{"title":"工艺条件对新型日光模拟光伏辅助干燥系统中番茄渣干燥的影响","authors":"Damla Bayana, Filiz İçier","doi":"10.1007/s11947-024-03411-2","DOIUrl":null,"url":null,"abstract":"<p>The tomato pomace (TP), which is a by-product of the production of tomato paste, was dried in a novel custom-designed daylight simulated photovoltaic assisted dryer (DPVD). The different light applications (daylight, UV light, daylight + UV light, and without light), different air velocities (1.5 and 2 m/s), and different heating source modes (hot air and infrared) were applied to dry TP having a moisture content of 80.60 ± 0.73% to the moisture content of 7.66 ± 1.72%. The average water activity values of all dried samples were measured as 0.52 ± 0.08. Analysis was conducted to compare sun drying with the effects of process conditions on the quality (color properties, lycopene, β-carotene, and total mesophilic aerobic bacteria count) and performance (energy efficiency, exergy efficiency, specific moisture evaporation rate, and improvement potential) characteristics of TP. The effects of process conditions for each heating source mode were determined separately, and the improvement of the system performance for each mode was investigated. The effect of the process conditions on total aerobic mesophilic bacteria (TAMB) count was similar in general. In the infrared heating mode, the loss in lycopene and β-carotene contents was 59.55 ± 2.22 and 57.87 ± 2.51 minimum for 1.5 m/s air velocity without light application and for 2 m/s with ultraviolet + daylight application. In general, the performance of the system decreased in case of using ultraviolet light. The retention in the lycopene and β-carotene contents was higher in the infrared mode with light applications compared to hot air mode without light. The optimum drying conditions were air velocity of 2 m/s with “daylight” assistance in the hot air heating mode and with “ultraviolet + daylight” assistance in the infrared heating mode. All the energy and the daylight source used in drying applications were obtained from the sun, a renewable energy source, thanks to the photovoltaic panel and the solar tube units in the novel custom-designed drying system.</p>","PeriodicalId":562,"journal":{"name":"Food and Bioprocess Technology","volume":null,"pages":null},"PeriodicalIF":5.3000,"publicationDate":"2024-05-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effects of Process Conditions on Drying of Tomato Pomace in a Novel Daylight Simulated Photovoltaic-Assisted Drying System\",\"authors\":\"Damla Bayana, Filiz İçier\",\"doi\":\"10.1007/s11947-024-03411-2\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>The tomato pomace (TP), which is a by-product of the production of tomato paste, was dried in a novel custom-designed daylight simulated photovoltaic assisted dryer (DPVD). The different light applications (daylight, UV light, daylight + UV light, and without light), different air velocities (1.5 and 2 m/s), and different heating source modes (hot air and infrared) were applied to dry TP having a moisture content of 80.60 ± 0.73% to the moisture content of 7.66 ± 1.72%. The average water activity values of all dried samples were measured as 0.52 ± 0.08. Analysis was conducted to compare sun drying with the effects of process conditions on the quality (color properties, lycopene, β-carotene, and total mesophilic aerobic bacteria count) and performance (energy efficiency, exergy efficiency, specific moisture evaporation rate, and improvement potential) characteristics of TP. The effects of process conditions for each heating source mode were determined separately, and the improvement of the system performance for each mode was investigated. The effect of the process conditions on total aerobic mesophilic bacteria (TAMB) count was similar in general. In the infrared heating mode, the loss in lycopene and β-carotene contents was 59.55 ± 2.22 and 57.87 ± 2.51 minimum for 1.5 m/s air velocity without light application and for 2 m/s with ultraviolet + daylight application. In general, the performance of the system decreased in case of using ultraviolet light. The retention in the lycopene and β-carotene contents was higher in the infrared mode with light applications compared to hot air mode without light. The optimum drying conditions were air velocity of 2 m/s with “daylight” assistance in the hot air heating mode and with “ultraviolet + daylight” assistance in the infrared heating mode. All the energy and the daylight source used in drying applications were obtained from the sun, a renewable energy source, thanks to the photovoltaic panel and the solar tube units in the novel custom-designed drying system.</p>\",\"PeriodicalId\":562,\"journal\":{\"name\":\"Food and Bioprocess Technology\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.3000,\"publicationDate\":\"2024-05-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Food and Bioprocess Technology\",\"FirstCategoryId\":\"97\",\"ListUrlMain\":\"https://doi.org/10.1007/s11947-024-03411-2\",\"RegionNum\":2,\"RegionCategory\":\"农林科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"FOOD SCIENCE & TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Food and Bioprocess Technology","FirstCategoryId":"97","ListUrlMain":"https://doi.org/10.1007/s11947-024-03411-2","RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"FOOD SCIENCE & TECHNOLOGY","Score":null,"Total":0}
Effects of Process Conditions on Drying of Tomato Pomace in a Novel Daylight Simulated Photovoltaic-Assisted Drying System
The tomato pomace (TP), which is a by-product of the production of tomato paste, was dried in a novel custom-designed daylight simulated photovoltaic assisted dryer (DPVD). The different light applications (daylight, UV light, daylight + UV light, and without light), different air velocities (1.5 and 2 m/s), and different heating source modes (hot air and infrared) were applied to dry TP having a moisture content of 80.60 ± 0.73% to the moisture content of 7.66 ± 1.72%. The average water activity values of all dried samples were measured as 0.52 ± 0.08. Analysis was conducted to compare sun drying with the effects of process conditions on the quality (color properties, lycopene, β-carotene, and total mesophilic aerobic bacteria count) and performance (energy efficiency, exergy efficiency, specific moisture evaporation rate, and improvement potential) characteristics of TP. The effects of process conditions for each heating source mode were determined separately, and the improvement of the system performance for each mode was investigated. The effect of the process conditions on total aerobic mesophilic bacteria (TAMB) count was similar in general. In the infrared heating mode, the loss in lycopene and β-carotene contents was 59.55 ± 2.22 and 57.87 ± 2.51 minimum for 1.5 m/s air velocity without light application and for 2 m/s with ultraviolet + daylight application. In general, the performance of the system decreased in case of using ultraviolet light. The retention in the lycopene and β-carotene contents was higher in the infrared mode with light applications compared to hot air mode without light. The optimum drying conditions were air velocity of 2 m/s with “daylight” assistance in the hot air heating mode and with “ultraviolet + daylight” assistance in the infrared heating mode. All the energy and the daylight source used in drying applications were obtained from the sun, a renewable energy source, thanks to the photovoltaic panel and the solar tube units in the novel custom-designed drying system.
期刊介绍:
Food and Bioprocess Technology provides an effective and timely platform for cutting-edge high quality original papers in the engineering and science of all types of food processing technologies, from the original food supply source to the consumer’s dinner table. It aims to be a leading international journal for the multidisciplinary agri-food research community.
The journal focuses especially on experimental or theoretical research findings that have the potential for helping the agri-food industry to improve process efficiency, enhance product quality and, extend shelf-life of fresh and processed agri-food products. The editors present critical reviews on new perspectives to established processes, innovative and emerging technologies, and trends and future research in food and bioproducts processing. The journal also publishes short communications for rapidly disseminating preliminary results, letters to the Editor on recent developments and controversy, and book reviews.