Luhao Yuan, Dongdong Gu, Xin Liu, Keyu Shi, Kaijie Lin, He Liu, Han Zhang, D. Dai, Jianfeng Sun, Wenxin Chen, Jie Wang
{"title":"受海螵蛸启发设计和增材制造仿生混合结构,实现优异的机械性能和形状记忆功能","authors":"Luhao Yuan, Dongdong Gu, Xin Liu, Keyu Shi, Kaijie Lin, He Liu, Han Zhang, D. Dai, Jianfeng Sun, Wenxin Chen, Jie Wang","doi":"10.1088/2631-7990/ad5084","DOIUrl":null,"url":null,"abstract":"\n Lightweight porous materials with high load-bearing, damage tolerance and energy absorption as well as intelligence of shape recovery after material deformation are beneficial and critical for many applications, e.g., aerospace, automobiles, electronics, etc. Cuttlebone produced in the cuttlefish has evolved vertical walls with the optimal corrugation gradient, enabling stress homogenization, significant load bearing, and damage tolerance to protect the organism from high external pressures in the deep sea. This work illustrated that the complex hybrid wave shape in cuttlebone walls, becoming more tortuous from bottom to top, creates a lightweight, load-bearing structure with progressive failure. By mimicking the cuttlebone, a novel bionic hybrid structure (BHS) was proposed, and as a comparison, a regular corrugated structure (RCS) and a straight wall structure (SWS) were designed. Three types of designed structures have been successfully manufactured by laser powder bed fusion with NiTi powder. The LPBF-processed BHS exhibited a total porosity of 0.042% and a good dimensional accuracy with a peak deviation of 17.4 μm. Microstructural analysis indicated that the LPBF-processed BHS had a strong (001) crystallographic orientation and an average size of 9.85 μm. Mechanical analysis revealed the LPBF-processed BHS could withstand over 25 000 times its weight without significant deformation and had the highest specific energy absorption value (5.32 J/g) due to the absence of stress concentration and progressive wall failure during compression. Cyclic compression testing showed that LPBF-processed BHS possessed superior viscoelastic and elasticity energy dissipation capacity. Importantly, the uniform reversible phase transition from martensite to austenite in the walls enables the structure to largely recover its pre-deformation shape when heated (over 99% recovery rate). These design strategies can serve as valuable references for the development of intelligent components that possess high mechanical efficiency and shape memory capabilities.","PeriodicalId":52353,"journal":{"name":"International Journal of Extreme Manufacturing","volume":null,"pages":null},"PeriodicalIF":16.1000,"publicationDate":"2024-05-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Design and additive manufacturing of bionic hybrid structure inspired by cuttlebone to achieve superior mechanical properties and shape memory function\",\"authors\":\"Luhao Yuan, Dongdong Gu, Xin Liu, Keyu Shi, Kaijie Lin, He Liu, Han Zhang, D. Dai, Jianfeng Sun, Wenxin Chen, Jie Wang\",\"doi\":\"10.1088/2631-7990/ad5084\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n Lightweight porous materials with high load-bearing, damage tolerance and energy absorption as well as intelligence of shape recovery after material deformation are beneficial and critical for many applications, e.g., aerospace, automobiles, electronics, etc. Cuttlebone produced in the cuttlefish has evolved vertical walls with the optimal corrugation gradient, enabling stress homogenization, significant load bearing, and damage tolerance to protect the organism from high external pressures in the deep sea. This work illustrated that the complex hybrid wave shape in cuttlebone walls, becoming more tortuous from bottom to top, creates a lightweight, load-bearing structure with progressive failure. By mimicking the cuttlebone, a novel bionic hybrid structure (BHS) was proposed, and as a comparison, a regular corrugated structure (RCS) and a straight wall structure (SWS) were designed. Three types of designed structures have been successfully manufactured by laser powder bed fusion with NiTi powder. The LPBF-processed BHS exhibited a total porosity of 0.042% and a good dimensional accuracy with a peak deviation of 17.4 μm. Microstructural analysis indicated that the LPBF-processed BHS had a strong (001) crystallographic orientation and an average size of 9.85 μm. Mechanical analysis revealed the LPBF-processed BHS could withstand over 25 000 times its weight without significant deformation and had the highest specific energy absorption value (5.32 J/g) due to the absence of stress concentration and progressive wall failure during compression. Cyclic compression testing showed that LPBF-processed BHS possessed superior viscoelastic and elasticity energy dissipation capacity. Importantly, the uniform reversible phase transition from martensite to austenite in the walls enables the structure to largely recover its pre-deformation shape when heated (over 99% recovery rate). These design strategies can serve as valuable references for the development of intelligent components that possess high mechanical efficiency and shape memory capabilities.\",\"PeriodicalId\":52353,\"journal\":{\"name\":\"International Journal of Extreme Manufacturing\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":16.1000,\"publicationDate\":\"2024-05-24\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Extreme Manufacturing\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1088/2631-7990/ad5084\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MANUFACTURING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Extreme Manufacturing","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1088/2631-7990/ad5084","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MANUFACTURING","Score":null,"Total":0}
Design and additive manufacturing of bionic hybrid structure inspired by cuttlebone to achieve superior mechanical properties and shape memory function
Lightweight porous materials with high load-bearing, damage tolerance and energy absorption as well as intelligence of shape recovery after material deformation are beneficial and critical for many applications, e.g., aerospace, automobiles, electronics, etc. Cuttlebone produced in the cuttlefish has evolved vertical walls with the optimal corrugation gradient, enabling stress homogenization, significant load bearing, and damage tolerance to protect the organism from high external pressures in the deep sea. This work illustrated that the complex hybrid wave shape in cuttlebone walls, becoming more tortuous from bottom to top, creates a lightweight, load-bearing structure with progressive failure. By mimicking the cuttlebone, a novel bionic hybrid structure (BHS) was proposed, and as a comparison, a regular corrugated structure (RCS) and a straight wall structure (SWS) were designed. Three types of designed structures have been successfully manufactured by laser powder bed fusion with NiTi powder. The LPBF-processed BHS exhibited a total porosity of 0.042% and a good dimensional accuracy with a peak deviation of 17.4 μm. Microstructural analysis indicated that the LPBF-processed BHS had a strong (001) crystallographic orientation and an average size of 9.85 μm. Mechanical analysis revealed the LPBF-processed BHS could withstand over 25 000 times its weight without significant deformation and had the highest specific energy absorption value (5.32 J/g) due to the absence of stress concentration and progressive wall failure during compression. Cyclic compression testing showed that LPBF-processed BHS possessed superior viscoelastic and elasticity energy dissipation capacity. Importantly, the uniform reversible phase transition from martensite to austenite in the walls enables the structure to largely recover its pre-deformation shape when heated (over 99% recovery rate). These design strategies can serve as valuable references for the development of intelligent components that possess high mechanical efficiency and shape memory capabilities.
期刊介绍:
The International Journal of Extreme Manufacturing (IJEM) focuses on publishing original articles and reviews related to the science and technology of manufacturing functional devices and systems with extreme dimensions and/or extreme functionalities. The journal covers a wide range of topics, from fundamental science to cutting-edge technologies that push the boundaries of currently known theories, methods, scales, environments, and performance. Extreme manufacturing encompasses various aspects such as manufacturing with extremely high energy density, ultrahigh precision, extremely small spatial and temporal scales, extremely intensive fields, and giant systems with extreme complexity and several factors. It encompasses multiple disciplines, including machinery, materials, optics, physics, chemistry, mechanics, and mathematics. The journal is interested in theories, processes, metrology, characterization, equipment, conditions, and system integration in extreme manufacturing. Additionally, it covers materials, structures, and devices with extreme functionalities.