Experimental and numerical study of a novel composite building wall U-value

The present study aims to minimize the overall heat transfer coefficient (U-value) and heat flux through building walls to improve indoor thermal comfort, using different bricks and insulating materials in building wall construction. The building walls of three different types of bricks (Type-1, Type-2, and Type-3) were tested to compare the U-value through the wall. The brick with the low U-value was used to build a composite wall with the addition of glass wool and air cavity. The experiment was conducted maintaining different hot chamber temperatures (40℃ to 65℃) to see the effect of hot chamber temperature on the U-value. The temperature of the cold fluid chamber is increased by 0.9℃ in 0 to 210 min of testing duration. The maximum heat flux using Type-3 brick in the composite wall is reduced by 3.37%, and the percentage reduction in indoor temperature is 40.83%. Steady-state numerical analysis was also performed to perceive the temperature distribution on the composite wall surface and found to be well-matched with the experimental model with a percentage deviation of 1.96%. The results suggested that using glass wool and air cavities with low thermal conductivity, low density, and high specific heat capacity effectively reduces the U-value throughout the building wall.