{"title":"锂-固体电解质界面的电-化学-机械失效建模:空洞演化和锂渗透","authors":"","doi":"10.1016/j.jmps.2024.105799","DOIUrl":null,"url":null,"abstract":"<div><p>The solid-solid contact interface is crucial for the reliability of solid-state energy storage systems. The contact condition becomes more complicated when lithium (Li) metal is used as the anode. The contact between solid electrolyte (SE) and Li metal is inferior compared to the liquid/solid interface in conventional Li-ion batteries. Experimental evidence has shown that improper operating conditions of solid-state batteries can lead to electro-chemo-mechanical failures at the Li/SE interface, including the formation of voids and the penetration of Li. In this study, a unified phase-field model is developed to investigate these two mechanisms. The model considers the coupled electro-chemo-mechanical processes including void diffusion, lattice annihilation, stripping and plating reactions, and plastic deformation of Li metal. The study begins with a revisit of the deformation-mechanism map for Li metal under a wide range of temperatures, stress, and deformation rates. This map serves as the basis for the mechanical characterization in the phase-field model. The large inelastic deformation of Li is considered by introducing an advection term into the Allen-Cahn equation, which is used to describe the dynamic evolution of the Li and void phases. The effects of current density and stack pressure on void evolution and Li penetration are studied based on the model predictions. By combining the simulation results with the experimental data from publications, we obtain the stable operation zone of stack pressure and applied current density. In this zone, the Li/SE interface can enable stable stripping and plating of Li metal. The same phase-field modeling framework is transferred to investigate the Li-Mg alloy/SE interface considering Li-Mg alloy is also used as the anode. The fundamental difference between Li/SE and Li-Mg/SE is analyzed accordingly. This study provides a useful tool for the design, manufacturing, and management of next-generation batteries by providing important scientific insights into the electro-chemo-mechanical processes of different anode materials under various operational conditions.</p></div>","PeriodicalId":17331,"journal":{"name":"Journal of The Mechanics and Physics of Solids","volume":null,"pages":null},"PeriodicalIF":5.0000,"publicationDate":"2024-07-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S0022509624002655/pdfft?md5=09ae07d76b9943a188036487f2cedd8c&pid=1-s2.0-S0022509624002655-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Modeling the electro-chemo-mechanical failure at the lithium-solid electrolyte interface: Void evolution and lithium penetration\",\"authors\":\"\",\"doi\":\"10.1016/j.jmps.2024.105799\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The solid-solid contact interface is crucial for the reliability of solid-state energy storage systems. The contact condition becomes more complicated when lithium (Li) metal is used as the anode. The contact between solid electrolyte (SE) and Li metal is inferior compared to the liquid/solid interface in conventional Li-ion batteries. Experimental evidence has shown that improper operating conditions of solid-state batteries can lead to electro-chemo-mechanical failures at the Li/SE interface, including the formation of voids and the penetration of Li. In this study, a unified phase-field model is developed to investigate these two mechanisms. The model considers the coupled electro-chemo-mechanical processes including void diffusion, lattice annihilation, stripping and plating reactions, and plastic deformation of Li metal. The study begins with a revisit of the deformation-mechanism map for Li metal under a wide range of temperatures, stress, and deformation rates. This map serves as the basis for the mechanical characterization in the phase-field model. The large inelastic deformation of Li is considered by introducing an advection term into the Allen-Cahn equation, which is used to describe the dynamic evolution of the Li and void phases. The effects of current density and stack pressure on void evolution and Li penetration are studied based on the model predictions. By combining the simulation results with the experimental data from publications, we obtain the stable operation zone of stack pressure and applied current density. In this zone, the Li/SE interface can enable stable stripping and plating of Li metal. The same phase-field modeling framework is transferred to investigate the Li-Mg alloy/SE interface considering Li-Mg alloy is also used as the anode. The fundamental difference between Li/SE and Li-Mg/SE is analyzed accordingly. This study provides a useful tool for the design, manufacturing, and management of next-generation batteries by providing important scientific insights into the electro-chemo-mechanical processes of different anode materials under various operational conditions.</p></div>\",\"PeriodicalId\":17331,\"journal\":{\"name\":\"Journal of The Mechanics and Physics of Solids\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.0000,\"publicationDate\":\"2024-07-27\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S0022509624002655/pdfft?md5=09ae07d76b9943a188036487f2cedd8c&pid=1-s2.0-S0022509624002655-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of The Mechanics and Physics of Solids\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0022509624002655\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of The Mechanics and Physics of Solids","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0022509624002655","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Modeling the electro-chemo-mechanical failure at the lithium-solid electrolyte interface: Void evolution and lithium penetration
The solid-solid contact interface is crucial for the reliability of solid-state energy storage systems. The contact condition becomes more complicated when lithium (Li) metal is used as the anode. The contact between solid electrolyte (SE) and Li metal is inferior compared to the liquid/solid interface in conventional Li-ion batteries. Experimental evidence has shown that improper operating conditions of solid-state batteries can lead to electro-chemo-mechanical failures at the Li/SE interface, including the formation of voids and the penetration of Li. In this study, a unified phase-field model is developed to investigate these two mechanisms. The model considers the coupled electro-chemo-mechanical processes including void diffusion, lattice annihilation, stripping and plating reactions, and plastic deformation of Li metal. The study begins with a revisit of the deformation-mechanism map for Li metal under a wide range of temperatures, stress, and deformation rates. This map serves as the basis for the mechanical characterization in the phase-field model. The large inelastic deformation of Li is considered by introducing an advection term into the Allen-Cahn equation, which is used to describe the dynamic evolution of the Li and void phases. The effects of current density and stack pressure on void evolution and Li penetration are studied based on the model predictions. By combining the simulation results with the experimental data from publications, we obtain the stable operation zone of stack pressure and applied current density. In this zone, the Li/SE interface can enable stable stripping and plating of Li metal. The same phase-field modeling framework is transferred to investigate the Li-Mg alloy/SE interface considering Li-Mg alloy is also used as the anode. The fundamental difference between Li/SE and Li-Mg/SE is analyzed accordingly. This study provides a useful tool for the design, manufacturing, and management of next-generation batteries by providing important scientific insights into the electro-chemo-mechanical processes of different anode materials under various operational conditions.
期刊介绍:
The aim of Journal of The Mechanics and Physics of Solids is to publish research of the highest quality and of lasting significance on the mechanics of solids. The scope is broad, from fundamental concepts in mechanics to the analysis of novel phenomena and applications. Solids are interpreted broadly to include both hard and soft materials as well as natural and synthetic structures. The approach can be theoretical, experimental or computational.This research activity sits within engineering science and the allied areas of applied mathematics, materials science, bio-mechanics, applied physics, and geophysics.
The Journal was founded in 1952 by Rodney Hill, who was its Editor-in-Chief until 1968. The topics of interest to the Journal evolve with developments in the subject but its basic ethos remains the same: to publish research of the highest quality relating to the mechanics of solids. Thus, emphasis is placed on the development of fundamental concepts of mechanics and novel applications of these concepts based on theoretical, experimental or computational approaches, drawing upon the various branches of engineering science and the allied areas within applied mathematics, materials science, structural engineering, applied physics, and geophysics.
The main purpose of the Journal is to foster scientific understanding of the processes of deformation and mechanical failure of all solid materials, both technological and natural, and the connections between these processes and their underlying physical mechanisms. In this sense, the content of the Journal should reflect the current state of the discipline in analysis, experimental observation, and numerical simulation. In the interest of achieving this goal, authors are encouraged to consider the significance of their contributions for the field of mechanics and the implications of their results, in addition to describing the details of their work.