Investigation of vaned diffuser endwall contouring technology for improving the stable operating range of a centrifugal compressor with an asymmetric volute

In this study, nonaxisymmetric endwall contouring technology is employed as a passive control strategy to enhance the stable operating range of a centrifugal compressor with an asymmetric volute. The endwall contouring method is applied to the hub-side wall of the vaned diffuser within a centrifugal compressor stage. Instead of utilizing a flat hub as the baseline diffuser, various diffuser configurations featuring hub-side contoured endwalls are explored, with adjustments in the peak radial position and peak height of the convex and concave profiles. Numerical simulations are conducted to evaluate the performance of the centrifugal compressor stage with both the baseline and contoured vaned diffusers. The investigation explores the underlying flow control mechanisms and establishes the effective endwall contouring guidelines. The findings highlight the effectiveness of endwall contouring in enhancing the stable operating range of centrifugal compressors. Notably, a substantial enhancement of 15.1% in the stable operating range is achieved by employing the contoured diffuser with the peak radial position near the vane leading edge (LE) and the peak height at 20% of the vane height. The endwall contoured diffusers reduce the positive LE incidence angles to direct the fluid toward the suction side (SS), and increase the radial velocity near the SS to suppress the hub-suction corner separations in the diffuser passages near the volute tongue. These improvements collectively contribute to the enhancement of diffuser flow characteristics. Finally, a set of effective endwall contouring guidelines is proposed to guide the endwall contouring design for enhancing the stable operating range of centrifugal compressors.