Lucas Oliveira Cardoso , Bruno Santos Conceição , Márcio Luis Lyra Paredes , Silvana Mattedi
{"title":"利用 EoS 预测相行为,研究离子液体中天然气成分溶解度的相互作用二元参数","authors":"Lucas Oliveira Cardoso , Bruno Santos Conceição , Márcio Luis Lyra Paredes , Silvana Mattedi","doi":"10.1016/j.cherd.2024.09.013","DOIUrl":null,"url":null,"abstract":"<div><div>This paper describes multicomponent solubilities in ionic liquids using non-associative and associative equations of state (EoS). The parameterization routine was developed from liquid density and speed of sound data as an implementation procedure confirmed with the Aspen Plus simulator, which was used to evaluate the EoS’ phase equilibrium predictive performance. The [EMIM][BF<sub>4</sub>] and [BMIM][NTf<sub>2</sub>] ionic liquids were employed in this work. PC-SAFT with the 4 C associative scheme showed the best results in fitting the density and speed of sound curves. The deviation for [EMIM][BF<sub>4</sub>] was 0.12 % and 0.02 %, respectively, while for [BMIM][NTf<sub>2</sub>] was 0.05 % and 0.57 %, respectively. Regarding vapor-liquid equilibria, the CPA and PC-SAFT models presented the best predictive results, while PC-SAFT (4 C) presented, in general, a better fit for the binaries studied. The binary interaction parameter <span><math><mrow><mfenced><mrow><msub><mrow><mi>k</mi></mrow><mrow><mi>ij</mi></mrow></msub></mrow></mfenced></mrow></math></span> is near zero using PC-SAFT for C<sub>4+</sub>. So, we recommend using PC-SAFT with <span><math><msub><mrow><mi>k</mi></mrow><mrow><mi>ij</mi></mrow></msub></math></span>=0 between ionic liquids and C<sub>5+</sub> or heavier hydrocarbons.</div></div>","PeriodicalId":10019,"journal":{"name":"Chemical Engineering Research & Design","volume":"210 ","pages":"Pages 684-697"},"PeriodicalIF":3.7000,"publicationDate":"2024-09-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Investigation of interaction binary parameters for solubilities of the natural gas components in ionic liquids with EoS for predicting phase behavior\",\"authors\":\"Lucas Oliveira Cardoso , Bruno Santos Conceição , Márcio Luis Lyra Paredes , Silvana Mattedi\",\"doi\":\"10.1016/j.cherd.2024.09.013\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>This paper describes multicomponent solubilities in ionic liquids using non-associative and associative equations of state (EoS). The parameterization routine was developed from liquid density and speed of sound data as an implementation procedure confirmed with the Aspen Plus simulator, which was used to evaluate the EoS’ phase equilibrium predictive performance. The [EMIM][BF<sub>4</sub>] and [BMIM][NTf<sub>2</sub>] ionic liquids were employed in this work. PC-SAFT with the 4 C associative scheme showed the best results in fitting the density and speed of sound curves. The deviation for [EMIM][BF<sub>4</sub>] was 0.12 % and 0.02 %, respectively, while for [BMIM][NTf<sub>2</sub>] was 0.05 % and 0.57 %, respectively. Regarding vapor-liquid equilibria, the CPA and PC-SAFT models presented the best predictive results, while PC-SAFT (4 C) presented, in general, a better fit for the binaries studied. The binary interaction parameter <span><math><mrow><mfenced><mrow><msub><mrow><mi>k</mi></mrow><mrow><mi>ij</mi></mrow></msub></mrow></mfenced></mrow></math></span> is near zero using PC-SAFT for C<sub>4+</sub>. So, we recommend using PC-SAFT with <span><math><msub><mrow><mi>k</mi></mrow><mrow><mi>ij</mi></mrow></msub></math></span>=0 between ionic liquids and C<sub>5+</sub> or heavier hydrocarbons.</div></div>\",\"PeriodicalId\":10019,\"journal\":{\"name\":\"Chemical Engineering Research & Design\",\"volume\":\"210 \",\"pages\":\"Pages 684-697\"},\"PeriodicalIF\":3.7000,\"publicationDate\":\"2024-09-18\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Chemical Engineering Research & Design\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0263876224005434\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Chemical Engineering Research & Design","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0263876224005434","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
Investigation of interaction binary parameters for solubilities of the natural gas components in ionic liquids with EoS for predicting phase behavior
This paper describes multicomponent solubilities in ionic liquids using non-associative and associative equations of state (EoS). The parameterization routine was developed from liquid density and speed of sound data as an implementation procedure confirmed with the Aspen Plus simulator, which was used to evaluate the EoS’ phase equilibrium predictive performance. The [EMIM][BF4] and [BMIM][NTf2] ionic liquids were employed in this work. PC-SAFT with the 4 C associative scheme showed the best results in fitting the density and speed of sound curves. The deviation for [EMIM][BF4] was 0.12 % and 0.02 %, respectively, while for [BMIM][NTf2] was 0.05 % and 0.57 %, respectively. Regarding vapor-liquid equilibria, the CPA and PC-SAFT models presented the best predictive results, while PC-SAFT (4 C) presented, in general, a better fit for the binaries studied. The binary interaction parameter is near zero using PC-SAFT for C4+. So, we recommend using PC-SAFT with =0 between ionic liquids and C5+ or heavier hydrocarbons.
期刊介绍:
ChERD aims to be the principal international journal for publication of high quality, original papers in chemical engineering.
Papers showing how research results can be used in chemical engineering design, and accounts of experimental or theoretical research work bringing new perspectives to established principles, highlighting unsolved problems or indicating directions for future research, are particularly welcome. Contributions that deal with new developments in plant or processes and that can be given quantitative expression are encouraged. The journal is especially interested in papers that extend the boundaries of traditional chemical engineering.