B-006 Use of Sysmex UN-3000 Research Parameters for Semiquantitative Analysis of Urine Microscopic Elements

Background Microscopic examination of urine is an important component of urine analysis. However, it is labor-intensive and requires a skilled microscopist. The Sysmex UN-3000 (Kobe, JP) combines a Siemens CLINITEK Novus (Munich, GER) with a Sysmex UF-5000 flow cytometer and Sysmex UD-10 digital imaging device for fully automated urine analysis. It is FDA-approved for quantitation of red and white blood cells, epithelial cells, casts, and bacteria. It also flags for other particles such as sperm, yeast, pathologic casts, and crystals, which can then be confirmed on the UD-10. We sought to determine if and how the UF-5000 research parameter results could be used for semi-quantitative grading of pathologic casts, squamous epithelial cells, non-squamous epithelial cells, and crystals to match our reporting system. Methods Urine samples were analyzed by the UN-3000 and by manual review of urine sediment per laboratory protocols. Epithelial cells and crystals grades were none seen, few, moderate, many. Cast grades were 0, 1-3, 4-10, and >10. Results of manual microscopy were used to determine numerical cutoffs for the UF-5000 results which would agree within one grade in ≥90% of samples. Sperm and yeast are reported as either present or absent. For these particles, manual microscopy was compared to the results of the UF-5000 flagging and subsequent review of the UD-10 images. Results Rate of agreement between the methods is shown in the table. For sperm the UN-3000 showed 91.7% sensitivity and 100% specificity; for yeast, 93.8% sensitivity and 97.7% specificity. Conclusions We were able to use the research parameters from the UF-5000, in conjunction with the UD-10, to perform semi-quantitative grading. Adoption of this analyzer increases automation, with 70% of samples auto-validating per our protocols, while still conforming to our previous reporting system.