Dynamic analysis of whipping behavior induced by the circumferential fracture of high energy pipes considering fluid-structure interaction effect

To analyze the dynamic characteristics of whipping behavior induced by the circumferential fracture of high energy pipes, a numerical model of the piping system was presented based on the bidirectional fluid-structure interaction method. The reliability of this model was validated against experimental results. Furthermore, the dynamic characteristics of whipping behavior were studied, as well as the effects of some main parameters. The numerical results suggest that the entire whipping behavior can be divided into four stages: free-whipping stage Ⅰ, free-whipping stage Ⅱ, collision stage and periodic stage. The dynamic response of whipping behavior is different in the four stages and is dominated by a single mode with a frequency of 29.35 Hz under the combined action of the thrust force and U-bolt restraints. The increase of inlet flow rate causes the enhancement of thrust force and thus makes its dynamic response more complicated. The parameter analysis shows that the whipping behavior can be suppressed by choosing the small initial clearance, setting the suitable gap and increasing the straight segment length of U-bolt restraints. The above results are helpful to understand the dynamic characteristics of whipping behavior and provide valuable suggestions for the optimization of the protection measures.