Lianji Liang , Zhihao Lu , Qitao Zhang , Hongshui Tian , Fuchu Dai , Hanchao Jiang , Ning Zhong
{"title":"振动台模拟湖沼沉积物中的软沉积物变形结构","authors":"Lianji Liang , Zhihao Lu , Qitao Zhang , Hongshui Tian , Fuchu Dai , Hanchao Jiang , Ning Zhong","doi":"10.1016/j.sedgeo.2024.106756","DOIUrl":null,"url":null,"abstract":"<div><div>Soft sediment deformation structures (SSDSs) in lacustrine sediments could record paleoearthquakes in tectonically active areas. However, their interpretations of deformation and triggering mechanisms still exist disagreement due to the lack of understanding of natural formation processes of SSDSs. In this study, two large shaking table experiments of saturated lacustrine sedimentary sequences, including Model 1 (simple stratigraphic system of thick silty-clay and sand layer) and Model 2 (stratigraphic systems of thin silty-clay and sand alternating layers) were carried out at the different peak ground accelerations (PGA) in order to simulate the earthquake-triggered SSDSs on the basis of field investigation in Tashkorgan of western China. The results showed that there were no SSDSs formed at the PGA 0.125<em>g</em>, and the excess pore-water pressure ratio (γ<sub><em>μ</em></sub>) measured in the sand layer was lower than 0.1; sand volcanos, pipes and sand veins were formed at the PGA 0.25<em>g</em>, and the γ<sub><em>μ</em></sub> value of the sand layer reached about 0.2 with the maximum liquefied depths of nearly 30 cm, indicating that weak liquefaction occurred in the sand layer; sand volcanos, pipes, sand veins, diapirs, load and flame structures, ball-and-pillow structures, silty-clay deformation structures were formed at the PGA 0.5<em>g</em> and 0.8<em>g</em>, and the γ<sub><em>μ</em></sub> value of sand layer reached about 0.91 and 0.94 with the maximum liquefied depths of nearly 60 cm and 100 cm, respectively. The γ<sub><em>μ</em></sub> value of silty-clay layers measured in all the tests was lower than 0.1, indicating that little liquefaction but thixotropy happened in the silty-clay layers. The tests showed that liquefied SSDSs could form at the PGA 0.25<em>g</em>, while thixotropic and gravity-driven SSDSs could form until the PGA reached 0.5<em>g</em>. This study also provided insights for single or closely spaced shaking events being responsible of superposed deformed beds. The simulated SSDSs have striking resemblance to that of ones identified in the field, supporting the earthquake triggering of SSDSs in the Tashkorgan area.</div></div>","PeriodicalId":21575,"journal":{"name":"Sedimentary Geology","volume":"472 ","pages":"Article 106756"},"PeriodicalIF":2.7000,"publicationDate":"2024-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Shaking table simulation of soft sediment deformation structures in lacustrine sediments\",\"authors\":\"Lianji Liang , Zhihao Lu , Qitao Zhang , Hongshui Tian , Fuchu Dai , Hanchao Jiang , Ning Zhong\",\"doi\":\"10.1016/j.sedgeo.2024.106756\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>Soft sediment deformation structures (SSDSs) in lacustrine sediments could record paleoearthquakes in tectonically active areas. However, their interpretations of deformation and triggering mechanisms still exist disagreement due to the lack of understanding of natural formation processes of SSDSs. In this study, two large shaking table experiments of saturated lacustrine sedimentary sequences, including Model 1 (simple stratigraphic system of thick silty-clay and sand layer) and Model 2 (stratigraphic systems of thin silty-clay and sand alternating layers) were carried out at the different peak ground accelerations (PGA) in order to simulate the earthquake-triggered SSDSs on the basis of field investigation in Tashkorgan of western China. The results showed that there were no SSDSs formed at the PGA 0.125<em>g</em>, and the excess pore-water pressure ratio (γ<sub><em>μ</em></sub>) measured in the sand layer was lower than 0.1; sand volcanos, pipes and sand veins were formed at the PGA 0.25<em>g</em>, and the γ<sub><em>μ</em></sub> value of the sand layer reached about 0.2 with the maximum liquefied depths of nearly 30 cm, indicating that weak liquefaction occurred in the sand layer; sand volcanos, pipes, sand veins, diapirs, load and flame structures, ball-and-pillow structures, silty-clay deformation structures were formed at the PGA 0.5<em>g</em> and 0.8<em>g</em>, and the γ<sub><em>μ</em></sub> value of sand layer reached about 0.91 and 0.94 with the maximum liquefied depths of nearly 60 cm and 100 cm, respectively. The γ<sub><em>μ</em></sub> value of silty-clay layers measured in all the tests was lower than 0.1, indicating that little liquefaction but thixotropy happened in the silty-clay layers. The tests showed that liquefied SSDSs could form at the PGA 0.25<em>g</em>, while thixotropic and gravity-driven SSDSs could form until the PGA reached 0.5<em>g</em>. This study also provided insights for single or closely spaced shaking events being responsible of superposed deformed beds. The simulated SSDSs have striking resemblance to that of ones identified in the field, supporting the earthquake triggering of SSDSs in the Tashkorgan area.</div></div>\",\"PeriodicalId\":21575,\"journal\":{\"name\":\"Sedimentary Geology\",\"volume\":\"472 \",\"pages\":\"Article 106756\"},\"PeriodicalIF\":2.7000,\"publicationDate\":\"2024-10-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Sedimentary Geology\",\"FirstCategoryId\":\"89\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0037073824001799\",\"RegionNum\":2,\"RegionCategory\":\"地球科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"GEOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Sedimentary Geology","FirstCategoryId":"89","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0037073824001799","RegionNum":2,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"GEOLOGY","Score":null,"Total":0}
Shaking table simulation of soft sediment deformation structures in lacustrine sediments
Soft sediment deformation structures (SSDSs) in lacustrine sediments could record paleoearthquakes in tectonically active areas. However, their interpretations of deformation and triggering mechanisms still exist disagreement due to the lack of understanding of natural formation processes of SSDSs. In this study, two large shaking table experiments of saturated lacustrine sedimentary sequences, including Model 1 (simple stratigraphic system of thick silty-clay and sand layer) and Model 2 (stratigraphic systems of thin silty-clay and sand alternating layers) were carried out at the different peak ground accelerations (PGA) in order to simulate the earthquake-triggered SSDSs on the basis of field investigation in Tashkorgan of western China. The results showed that there were no SSDSs formed at the PGA 0.125g, and the excess pore-water pressure ratio (γμ) measured in the sand layer was lower than 0.1; sand volcanos, pipes and sand veins were formed at the PGA 0.25g, and the γμ value of the sand layer reached about 0.2 with the maximum liquefied depths of nearly 30 cm, indicating that weak liquefaction occurred in the sand layer; sand volcanos, pipes, sand veins, diapirs, load and flame structures, ball-and-pillow structures, silty-clay deformation structures were formed at the PGA 0.5g and 0.8g, and the γμ value of sand layer reached about 0.91 and 0.94 with the maximum liquefied depths of nearly 60 cm and 100 cm, respectively. The γμ value of silty-clay layers measured in all the tests was lower than 0.1, indicating that little liquefaction but thixotropy happened in the silty-clay layers. The tests showed that liquefied SSDSs could form at the PGA 0.25g, while thixotropic and gravity-driven SSDSs could form until the PGA reached 0.5g. This study also provided insights for single or closely spaced shaking events being responsible of superposed deformed beds. The simulated SSDSs have striking resemblance to that of ones identified in the field, supporting the earthquake triggering of SSDSs in the Tashkorgan area.
期刊介绍:
Sedimentary Geology is a journal that rapidly publishes high quality, original research and review papers that cover all aspects of sediments and sedimentary rocks at all spatial and temporal scales. Submitted papers must make a significant contribution to the field of study and must place the research in a broad context, so that it is of interest to the diverse, international readership of the journal. Papers that are largely descriptive in nature, of limited scope or local geographical significance, or based on limited data will not be considered for publication.