{"title":"基于开环谐振器的宽带高增益微型化双频 MIMO 天线","authors":"Ming-An Chung, Chia-Wei Lin, Chih-Wei Yang","doi":"10.1155/2024/3858416","DOIUrl":null,"url":null,"abstract":"<p>This paper proposes and analyzes a 2 × 2 multi-input multioutput antenna based on an open-loop resonator structure and an inverted L structure. The top layer of the antenna uses symmetric inverted hook-shaped and inverted L branches and is connected to the bottom layer of the dual-feed port and the ground plane using the VIAs, respectively. The open-loop resonator structure at the bottom of the antenna and the top layer of the branched circuit are resonated to provide wide-bandwidth and dual-frequency characteristics. The substrate uses FR4 with an area of 40 × 30 × 0.8 mm<sup>3</sup>. Although the two antenna feed ports are very close to each other, using via to connect the defective bottom ground structure and the top inverted L-shaped branch, the isolation still achieves an excellent performance of 15 dB. The antenna has multiband application characteristics, and the bands include 2.29–5.51, 6.14–10.26, 2.29–5.33, 5.19–6.64, and 6.78–10.16 GHz. In pattern and MIMO transmission efficiency measurement, the peak radiation efficiency is 89%, the peak gain is 8.5 dBi, and the ECC is less than 0.034. In the transmission efficiency measurement mode using 64-QAM, watching the error vector magnitude at 2.56 and 5.11 GHz, the demodulation effect is very good, and the respective throughput results are 100% and 79.2%. The broadband characteristics of the antenna have a variety of applications, and it is simulated at the specific absorption rate, which meets the standards set by the Federal Communications Commission and is very suitable for use in wearable devices. The antenna can be applied to the X-band, n77, n79, Sub-6 GHz, WiMax, DSRC, WiFi 6, WiFi 6E, WiFi 7, C-V2X, and C-band.</p>","PeriodicalId":54944,"journal":{"name":"International Journal of RF and Microwave Computer-Aided Engineering","volume":"2024 1","pages":""},"PeriodicalIF":0.9000,"publicationDate":"2024-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://onlinelibrary.wiley.com/doi/epdf/10.1155/2024/3858416","citationCount":"0","resultStr":"{\"title\":\"Miniaturize Dual-Band Open-Loop Resonator-Based MIMO Antenna With Wide Bandwidth and High Gain\",\"authors\":\"Ming-An Chung, Chia-Wei Lin, Chih-Wei Yang\",\"doi\":\"10.1155/2024/3858416\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>This paper proposes and analyzes a 2 × 2 multi-input multioutput antenna based on an open-loop resonator structure and an inverted L structure. The top layer of the antenna uses symmetric inverted hook-shaped and inverted L branches and is connected to the bottom layer of the dual-feed port and the ground plane using the VIAs, respectively. The open-loop resonator structure at the bottom of the antenna and the top layer of the branched circuit are resonated to provide wide-bandwidth and dual-frequency characteristics. The substrate uses FR4 with an area of 40 × 30 × 0.8 mm<sup>3</sup>. Although the two antenna feed ports are very close to each other, using via to connect the defective bottom ground structure and the top inverted L-shaped branch, the isolation still achieves an excellent performance of 15 dB. The antenna has multiband application characteristics, and the bands include 2.29–5.51, 6.14–10.26, 2.29–5.33, 5.19–6.64, and 6.78–10.16 GHz. In pattern and MIMO transmission efficiency measurement, the peak radiation efficiency is 89%, the peak gain is 8.5 dBi, and the ECC is less than 0.034. In the transmission efficiency measurement mode using 64-QAM, watching the error vector magnitude at 2.56 and 5.11 GHz, the demodulation effect is very good, and the respective throughput results are 100% and 79.2%. The broadband characteristics of the antenna have a variety of applications, and it is simulated at the specific absorption rate, which meets the standards set by the Federal Communications Commission and is very suitable for use in wearable devices. The antenna can be applied to the X-band, n77, n79, Sub-6 GHz, WiMax, DSRC, WiFi 6, WiFi 6E, WiFi 7, C-V2X, and C-band.</p>\",\"PeriodicalId\":54944,\"journal\":{\"name\":\"International Journal of RF and Microwave Computer-Aided Engineering\",\"volume\":\"2024 1\",\"pages\":\"\"},\"PeriodicalIF\":0.9000,\"publicationDate\":\"2024-10-16\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://onlinelibrary.wiley.com/doi/epdf/10.1155/2024/3858416\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of RF and Microwave Computer-Aided Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://onlinelibrary.wiley.com/doi/10.1155/2024/3858416\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of RF and Microwave Computer-Aided Engineering","FirstCategoryId":"5","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1155/2024/3858416","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS","Score":null,"Total":0}
引用次数: 0
摘要
本文提出并分析了一种基于开环谐振器结构和倒 L 结构的 2 × 2 多输入多输出天线。天线顶层采用对称的倒钩形和倒 L 支路,并利用 VIA 分别与底层的双馈端口和地平面相连。天线底部的开环谐振器结构与顶层的分支电路发生谐振,以提供宽带和双频特性。基板采用面积为 40 × 30 × 0.8 mm3 的 FR4。虽然天线的两个馈电端口非常接近,但通过使用通孔连接底部有缺陷的接地结构和顶部的倒 L 形分支,隔离性能仍然达到了 15 dB 的优异水平。该天线具有多频段应用特性,频段包括 2.29-5.51、6.14-10.26、2.29-5.33、5.19-6.64 和 6.78-10.16 GHz。在模式和 MIMO 传输效率测量中,峰值辐射效率为 89%,峰值增益为 8.5 dBi,ECC 小于 0.034。在使用 64-QAM 的传输效率测量模式下,观察 2.56 和 5.11 GHz 的误差矢量幅度,解调效果非常好,吞吐量结果分别为 100%和 79.2%。该天线的宽带特性有多种应用,其模拟的比吸收率符合美国联邦通信委员会制定的标准,非常适合用于可穿戴设备。该天线可应用于 X 波段、n77、n79、Sub-6 GHz、WiMax、DSRC、WiFi 6、WiFi 6E、WiFi 7、C-V2X 和 C 波段。
Miniaturize Dual-Band Open-Loop Resonator-Based MIMO Antenna With Wide Bandwidth and High Gain
This paper proposes and analyzes a 2 × 2 multi-input multioutput antenna based on an open-loop resonator structure and an inverted L structure. The top layer of the antenna uses symmetric inverted hook-shaped and inverted L branches and is connected to the bottom layer of the dual-feed port and the ground plane using the VIAs, respectively. The open-loop resonator structure at the bottom of the antenna and the top layer of the branched circuit are resonated to provide wide-bandwidth and dual-frequency characteristics. The substrate uses FR4 with an area of 40 × 30 × 0.8 mm3. Although the two antenna feed ports are very close to each other, using via to connect the defective bottom ground structure and the top inverted L-shaped branch, the isolation still achieves an excellent performance of 15 dB. The antenna has multiband application characteristics, and the bands include 2.29–5.51, 6.14–10.26, 2.29–5.33, 5.19–6.64, and 6.78–10.16 GHz. In pattern and MIMO transmission efficiency measurement, the peak radiation efficiency is 89%, the peak gain is 8.5 dBi, and the ECC is less than 0.034. In the transmission efficiency measurement mode using 64-QAM, watching the error vector magnitude at 2.56 and 5.11 GHz, the demodulation effect is very good, and the respective throughput results are 100% and 79.2%. The broadband characteristics of the antenna have a variety of applications, and it is simulated at the specific absorption rate, which meets the standards set by the Federal Communications Commission and is very suitable for use in wearable devices. The antenna can be applied to the X-band, n77, n79, Sub-6 GHz, WiMax, DSRC, WiFi 6, WiFi 6E, WiFi 7, C-V2X, and C-band.
期刊介绍:
International Journal of RF and Microwave Computer-Aided Engineering provides a common forum for the dissemination of research and development results in the areas of computer-aided design and engineering of RF, microwave, and millimeter-wave components, circuits, subsystems, and antennas. The journal is intended to be a single source of valuable information for all engineers and technicians, RF/microwave/mm-wave CAD tool vendors, researchers in industry, government and academia, professors and students, and systems engineers involved in RF/microwave/mm-wave technology.
Multidisciplinary in scope, the journal publishes peer-reviewed articles and short papers on topics that include, but are not limited to. . .
-Computer-Aided Modeling
-Computer-Aided Analysis
-Computer-Aided Optimization
-Software and Manufacturing Techniques
-Computer-Aided Measurements
-Measurements Interfaced with CAD Systems
In addition, the scope of the journal includes features such as software reviews, RF/microwave/mm-wave CAD related news, including brief reviews of CAD papers published elsewhere and a "Letters to the Editor" section.