Study on the influence of high permeability magnetic iron on energy consumption reduction in high gradient magnetic separator

The green processing of weakly magnetic iron ore is inseparable from high-intensity and high-gradient magnetic separator (HGMS), which is one of the most energy-intensive magnetic separation equipment. Iron (Fe) armor serves as the key primary structure for enhancing magnetic field conduction efficiency within the magnetic system. The order of magnetic properties of commonly used magnetic yoke materials is: ordinary carbon structural steel < Q235 steel < DT4 electrical pure iron. But the utilization cost of DT4 electrical pure iron is the highest, especially the magnetic properties of DT4C super electrical pure iron are unstable and the yield is low. On the basis of ordinary pure iron materials, this article has developed a new type of 411 pure iron (411) upon controlling the levels of harmful elements, while increasing the concentration of beneficial elements.intensity Furthermore, through the utilization of magnetic field simulation software, the impact of 411 on the background magnetic field intensity of HGMS was analyzed. The results indicated that the newly developed 411 pure Fe exhibited a coercivity of 24.07 A/m, a saturation magnetization intensity of ∼ 1.69 T, a maximum relative magnetic permeability of 24.38 × 10^-3H/m, demonstrating superior magnetic properties in comparison with Q235 and DT4C. When using 411 pure iron as the magnetic yoke material, the background magnetic field intensity of the HGMS can be increased by 6.85 % − 14.64 % compared with using DT4C super pure iron under the same excitation current conditions. The magnetic yoke with better magnetic conductivity will enhance the magnetic field utilization efficiency of the magnetic system, a reduce the excitation energy consumption, and improve the sorting performance of HGMS.