解读异质结硅太阳能电池在低温条件下的性能退化和发展趋势

IF 6.3 2区 材料科学 Q2 ENERGY & FUELS Solar Energy Materials and Solar Cells Pub Date : 2024-11-04 DOI:10.1016/j.solmat.2024.113214
Moustafa Y. Ghannam , Jef Poortmans
{"title":"解读异质结硅太阳能电池在低温条件下的性能退化和发展趋势","authors":"Moustafa Y. Ghannam ,&nbsp;Jef Poortmans","doi":"10.1016/j.solmat.2024.113214","DOIUrl":null,"url":null,"abstract":"<div><div>A compact model that combines numerical simulations using AFORS-HET and accurate equivalent circuit modelling is proposed and used to interpret the origins of the degradation and anomality's in the performance of the a-Si:H/c-Si heterojunction solar cells and its parameters at low temperature. The interpretations are applied to several trends reported on real cells. It is shown that as T decreases the a-Si:H(i) layer is depleted gradually from holes and that the cell operation fails once the layer is totally depleted and becoming intrinsic. The failure is caused by a substantial and sharp increase in the cell series resistance causing the collapse of the fill factor and of the cell current. It is found that at low temperature the open circuit voltage is significantly affected and its temperature dependence strongly distorted by hole depletion in the a-Si:H(i) spacer especially when the TCO work function is not appropriate. It is aslo shown that the S-shape in the cell I-V characteristics under illumination is closely linked to the TCO barrier reverse saturation current which explains its higher probability of appearnce at low temperature. Finally, it is concluded that the HJT cell would perform optimally down to the low 200 K range when the a-Si:H(p) is heavily doped and the front contact is ideally ohmic. Failing to satisfy such conditions the temperature range in which the HJT cell is useful is very limited.</div></div>","PeriodicalId":429,"journal":{"name":"Solar Energy Materials and Solar Cells","volume":"279 ","pages":"Article 113214"},"PeriodicalIF":6.3000,"publicationDate":"2024-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Interpretation of the degradation and trends in the performance of heterojunction silicon solar cells at low temperature\",\"authors\":\"Moustafa Y. Ghannam ,&nbsp;Jef Poortmans\",\"doi\":\"10.1016/j.solmat.2024.113214\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>A compact model that combines numerical simulations using AFORS-HET and accurate equivalent circuit modelling is proposed and used to interpret the origins of the degradation and anomality's in the performance of the a-Si:H/c-Si heterojunction solar cells and its parameters at low temperature. The interpretations are applied to several trends reported on real cells. It is shown that as T decreases the a-Si:H(i) layer is depleted gradually from holes and that the cell operation fails once the layer is totally depleted and becoming intrinsic. The failure is caused by a substantial and sharp increase in the cell series resistance causing the collapse of the fill factor and of the cell current. It is found that at low temperature the open circuit voltage is significantly affected and its temperature dependence strongly distorted by hole depletion in the a-Si:H(i) spacer especially when the TCO work function is not appropriate. It is aslo shown that the S-shape in the cell I-V characteristics under illumination is closely linked to the TCO barrier reverse saturation current which explains its higher probability of appearnce at low temperature. Finally, it is concluded that the HJT cell would perform optimally down to the low 200 K range when the a-Si:H(p) is heavily doped and the front contact is ideally ohmic. Failing to satisfy such conditions the temperature range in which the HJT cell is useful is very limited.</div></div>\",\"PeriodicalId\":429,\"journal\":{\"name\":\"Solar Energy Materials and Solar Cells\",\"volume\":\"279 \",\"pages\":\"Article 113214\"},\"PeriodicalIF\":6.3000,\"publicationDate\":\"2024-11-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Solar Energy Materials and Solar Cells\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0927024824005269\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENERGY & FUELS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Solar Energy Materials and Solar Cells","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0927024824005269","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
引用次数: 0

摘要

我们提出了一个结合 AFORS-HET 数值模拟和精确等效电路建模的紧凑模型,用于解释 a-Si:H/c-Si 异质结太阳能电池及其参数在低温下性能下降和异常的原因。这些解释适用于实际电池的几种趋势。结果表明,随着温度的降低,a-Si:H(i) 层中的空穴逐渐耗尽,一旦该层完全耗尽并成为本征层,电池就会失效。电池失效的原因是电池串联电阻大幅急剧增加,导致填充因子和电池电流崩溃。研究发现,在低温条件下,a-Si:H(i) 间隔层中的空穴耗竭会显著影响开路电压,并严重扭曲其温度依赖性,尤其是在 TCO 功函数不合适的情况下。此外,研究还表明,光照下电池 I-V 特性中的 S 形与 TCO 势垒反向饱和电流密切相关,这也是其在低温下出现概率较高的原因。最后,得出的结论是,当 a-Si:H(p) 被大量掺杂且前触点为理想欧姆时,HJT 电池在低至 200 K 的范围内性能最佳。如果不满足这些条件,HJT 电池的适用温度范围就非常有限。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Interpretation of the degradation and trends in the performance of heterojunction silicon solar cells at low temperature
A compact model that combines numerical simulations using AFORS-HET and accurate equivalent circuit modelling is proposed and used to interpret the origins of the degradation and anomality's in the performance of the a-Si:H/c-Si heterojunction solar cells and its parameters at low temperature. The interpretations are applied to several trends reported on real cells. It is shown that as T decreases the a-Si:H(i) layer is depleted gradually from holes and that the cell operation fails once the layer is totally depleted and becoming intrinsic. The failure is caused by a substantial and sharp increase in the cell series resistance causing the collapse of the fill factor and of the cell current. It is found that at low temperature the open circuit voltage is significantly affected and its temperature dependence strongly distorted by hole depletion in the a-Si:H(i) spacer especially when the TCO work function is not appropriate. It is aslo shown that the S-shape in the cell I-V characteristics under illumination is closely linked to the TCO barrier reverse saturation current which explains its higher probability of appearnce at low temperature. Finally, it is concluded that the HJT cell would perform optimally down to the low 200 K range when the a-Si:H(p) is heavily doped and the front contact is ideally ohmic. Failing to satisfy such conditions the temperature range in which the HJT cell is useful is very limited.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Solar Energy Materials and Solar Cells
Solar Energy Materials and Solar Cells 工程技术-材料科学:综合
CiteScore
12.60
自引率
11.60%
发文量
513
审稿时长
47 days
期刊介绍: Solar Energy Materials & Solar Cells is intended as a vehicle for the dissemination of research results on materials science and technology related to photovoltaic, photothermal and photoelectrochemical solar energy conversion. Materials science is taken in the broadest possible sense and encompasses physics, chemistry, optics, materials fabrication and analysis for all types of materials.
期刊最新文献
Oxide-nitride nanolayer stacks for enhanced passivation of p-type surfaces in silicon solar cells Accurately quantifying the recombination pathways unique in back contact solar cells Analyzing the effectiveness of various coatings to mitigate photovoltaic modules soiling in desert climate Solar energy harvester based on polarization insensitive and wide angle stable UWB absorber for UV, visible and IR frequency range Experimental evaluation of photovoltaic thermal (PVT) system using a modular heat collector with flat back shape fins, pipe, nanofluids and phase change material
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1