评估双高螺杆轧制过程中的剪切应变、运动状态和变形区

IF 0.8 4区材料科学 Q4 METALLURGY & METALLURGICAL ENGINEERING Metallurgist Pub Date : 2024-11-07 DOI:10.1007/s11015-024-01815-1

B. A. Romantsev, M. M. Skripalenko, M. N. Skripalenko, V. S. Yusupov, V. A. Vorotnikov, A. A. Sidorov

{"title":"评估双高螺杆轧制过程中的剪切应变、运动状态和变形区","authors":"B. A. Romantsev, M. M. Skripalenko, M. N. Skripalenko, V. S. Yusupov, V. A. Vorotnikov, A. A. Sidorov","doi":"10.1007/s11015-024-01815-1","DOIUrl":null,"url":null,"abstract":"<div><p>Two-high screw rolling of stainless-steel billets at feed angles of 6, 12, 18, and 24° was numerically simulated. It was established that increasing the feed angle of the rolls decreases the magnitude and inhomogeneity of the shear strains in the billet cross-section. With increase in the feed angle, the difference between the total velocities zone on the surface and at the center of the billet in the deformation decreases by 57%, the length of the geometric deformation zone decreases, and the length of the actual deformation zone increases by 16%.</p></div>","PeriodicalId":702,"journal":{"name":"Metallurgist","volume":"68 7","pages":"1059 - 1064"},"PeriodicalIF":0.8000,"publicationDate":"2024-11-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Assessment of shear strains, kinematic state, and deformation zone in two-high screw rolling processes\",\"authors\":\"B. A. Romantsev, M. M. Skripalenko, M. N. Skripalenko, V. S. Yusupov, V. A. Vorotnikov, A. A. Sidorov\",\"doi\":\"10.1007/s11015-024-01815-1\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Two-high screw rolling of stainless-steel billets at feed angles of 6, 12, 18, and 24° was numerically simulated. It was established that increasing the feed angle of the rolls decreases the magnitude and inhomogeneity of the shear strains in the billet cross-section. With increase in the feed angle, the difference between the total velocities zone on the surface and at the center of the billet in the deformation decreases by 57%, the length of the geometric deformation zone decreases, and the length of the actual deformation zone increases by 16%.</p></div>\",\"PeriodicalId\":702,\"journal\":{\"name\":\"Metallurgist\",\"volume\":\"68 7\",\"pages\":\"1059 - 1064\"},\"PeriodicalIF\":0.8000,\"publicationDate\":\"2024-11-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Metallurgist\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11015-024-01815-1\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Metallurgist","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11015-024-01815-1","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}

引用次数: 0

摘要

对进料角为 6、12、18 和 24°的不锈钢坯料的双螺旋轧制进行了数值模拟。结果表明，增大轧辊的进给角会减小钢坯横截面上剪切应变的大小和不均匀性。随着进给角的增大，变形过程中钢坯表面和中心总速度区之间的差值减小了 57%，几何变形区的长度减小，实际变形区的长度增加了 16%。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

Assessment of shear strains, kinematic state, and deformation zone in two-high screw rolling processes

Two-high screw rolling of stainless-steel billets at feed angles of 6, 12, 18, and 24° was numerically simulated. It was established that increasing the feed angle of the rolls decreases the magnitude and inhomogeneity of the shear strains in the billet cross-section. With increase in the feed angle, the difference between the total velocities zone on the surface and at the center of the billet in the deformation decreases by 57%, the length of the geometric deformation zone decreases, and the length of the actual deformation zone increases by 16%.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Metallurgist 工程技术-冶金工程

CiteScore

1.50

自引率

44.40%

发文量

151

审稿时长

4-8 weeks

期刊介绍： Metallurgist is the leading Russian journal in metallurgy. Publication started in 1956. Basic topics covered include: State of the art and development of enterprises in ferrous and nonferrous metallurgy and mining; Metallurgy of ferrous, nonferrous, rare, and precious metals; Metallurgical equipment; Automation and control; Protection of labor; Protection of the environment; Resources and energy saving; Quality and certification; History of metallurgy; Inventions (patents).