Xiong Du , Liexing Zhou , Jun Li , Zhenwei Xie , Shaohong Li , Hongbo Xiao , Mengnie Li , Yuanjie Zhao
{"title":"通过在低碳钢中构建马氏体-铁素体异质网络实现高强度和低屈强比","authors":"Xiong Du , Liexing Zhou , Jun Li , Zhenwei Xie , Shaohong Li , Hongbo Xiao , Mengnie Li , Yuanjie Zhao","doi":"10.1016/j.msea.2024.147526","DOIUrl":null,"url":null,"abstract":"<div><div>In this research, focusing on low-carbon steel, a martensite-ferrite heterogeneous structure dual-phase (MFDP) steel with a network morphology where ferrite is surrounded by martensite was obtained via cyclic annealing and subcritical quenching heat treatment processes. With the initial microstructure of ferrite and lamellar pearlite, a spherical pearlite and martensitic structure surrounding the ferrite was first obtained by applying the cyclic annealing process near the Ac<sub>1</sub> temperature. Subsequently, the annealed structure was subjected to subcritical quenching heat treatment, thereby establishing a network-like martensite-ferrite dual-phase heterogeneous structure and named N-760 °C and N-780 °C. In comparison with the ferrite-martensite dual-phase steel where ferrite envelopes martensite, N-780 °C witnessed a marked increase in tensile strength and uniform elongation, while the yield ratio dropped by 20 %. Through cyclic loading and unloading tensile tests, it was found that the N-760 °C showed a more obvious heterogeneous deformation-induced (HDI) strengthening effect. The results from electron backscattering and transmission electron microscopy indicate that, in the N-760 °C, a small quantity of dislocations is produced in the ferrite due to the martensitic phase transformation prior to the tensile test. During the tensile process, as the strain increases, the ferrite undergoes significant deformation, and the intragranular dislocations re-arrange to form dislocation cells and deformation-induced grain boundaries (SIBs). Meanwhile, geometrically necessary dislocations (GNDs) accumulate at the ferrite/martensite interface. Therefore, the non-coordinated deformation between the mesh-like dual-phase microstructure offers additional HDI strengthening for MFDP steel.</div></div>","PeriodicalId":385,"journal":{"name":"Materials Science and Engineering: A","volume":"920 ","pages":"Article 147526"},"PeriodicalIF":6.1000,"publicationDate":"2024-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Achieving high strength and low yield ratio by constructing the network martensite-ferrite heterogeneous in low carbon steels\",\"authors\":\"Xiong Du , Liexing Zhou , Jun Li , Zhenwei Xie , Shaohong Li , Hongbo Xiao , Mengnie Li , Yuanjie Zhao\",\"doi\":\"10.1016/j.msea.2024.147526\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>In this research, focusing on low-carbon steel, a martensite-ferrite heterogeneous structure dual-phase (MFDP) steel with a network morphology where ferrite is surrounded by martensite was obtained via cyclic annealing and subcritical quenching heat treatment processes. With the initial microstructure of ferrite and lamellar pearlite, a spherical pearlite and martensitic structure surrounding the ferrite was first obtained by applying the cyclic annealing process near the Ac<sub>1</sub> temperature. Subsequently, the annealed structure was subjected to subcritical quenching heat treatment, thereby establishing a network-like martensite-ferrite dual-phase heterogeneous structure and named N-760 °C and N-780 °C. In comparison with the ferrite-martensite dual-phase steel where ferrite envelopes martensite, N-780 °C witnessed a marked increase in tensile strength and uniform elongation, while the yield ratio dropped by 20 %. Through cyclic loading and unloading tensile tests, it was found that the N-760 °C showed a more obvious heterogeneous deformation-induced (HDI) strengthening effect. The results from electron backscattering and transmission electron microscopy indicate that, in the N-760 °C, a small quantity of dislocations is produced in the ferrite due to the martensitic phase transformation prior to the tensile test. During the tensile process, as the strain increases, the ferrite undergoes significant deformation, and the intragranular dislocations re-arrange to form dislocation cells and deformation-induced grain boundaries (SIBs). Meanwhile, geometrically necessary dislocations (GNDs) accumulate at the ferrite/martensite interface. Therefore, the non-coordinated deformation between the mesh-like dual-phase microstructure offers additional HDI strengthening for MFDP steel.</div></div>\",\"PeriodicalId\":385,\"journal\":{\"name\":\"Materials Science and Engineering: A\",\"volume\":\"920 \",\"pages\":\"Article 147526\"},\"PeriodicalIF\":6.1000,\"publicationDate\":\"2024-11-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Materials Science and Engineering: A\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0921509324014576\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materials Science and Engineering: A","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0921509324014576","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Achieving high strength and low yield ratio by constructing the network martensite-ferrite heterogeneous in low carbon steels
In this research, focusing on low-carbon steel, a martensite-ferrite heterogeneous structure dual-phase (MFDP) steel with a network morphology where ferrite is surrounded by martensite was obtained via cyclic annealing and subcritical quenching heat treatment processes. With the initial microstructure of ferrite and lamellar pearlite, a spherical pearlite and martensitic structure surrounding the ferrite was first obtained by applying the cyclic annealing process near the Ac1 temperature. Subsequently, the annealed structure was subjected to subcritical quenching heat treatment, thereby establishing a network-like martensite-ferrite dual-phase heterogeneous structure and named N-760 °C and N-780 °C. In comparison with the ferrite-martensite dual-phase steel where ferrite envelopes martensite, N-780 °C witnessed a marked increase in tensile strength and uniform elongation, while the yield ratio dropped by 20 %. Through cyclic loading and unloading tensile tests, it was found that the N-760 °C showed a more obvious heterogeneous deformation-induced (HDI) strengthening effect. The results from electron backscattering and transmission electron microscopy indicate that, in the N-760 °C, a small quantity of dislocations is produced in the ferrite due to the martensitic phase transformation prior to the tensile test. During the tensile process, as the strain increases, the ferrite undergoes significant deformation, and the intragranular dislocations re-arrange to form dislocation cells and deformation-induced grain boundaries (SIBs). Meanwhile, geometrically necessary dislocations (GNDs) accumulate at the ferrite/martensite interface. Therefore, the non-coordinated deformation between the mesh-like dual-phase microstructure offers additional HDI strengthening for MFDP steel.
期刊介绍:
Materials Science and Engineering A provides an international medium for the publication of theoretical and experimental studies related to the load-bearing capacity of materials as influenced by their basic properties, processing history, microstructure and operating environment. Appropriate submissions to Materials Science and Engineering A should include scientific and/or engineering factors which affect the microstructure - strength relationships of materials and report the changes to mechanical behavior.