Daniel A. Skaf, Tiago Carneiro Gomes, Robabeh Majidzadeh, R. N. Hussein, T. Carmichael, S. Rondeau‐Gagné
{"title":"有机场效应晶体管中的虫胶介电材料:从硅到纸基板","authors":"Daniel A. Skaf, Tiago Carneiro Gomes, Robabeh Majidzadeh, R. N. Hussein, T. Carmichael, S. Rondeau‐Gagné","doi":"10.1088/2058-8585/acda48","DOIUrl":null,"url":null,"abstract":"Recent advances in the design and preparation of electroactive materials, particularly semiconducting and conductive polymers, have resulted in the creation of novel organic electronics with advanced functionality and performance competitive with that of devices made of silicon. With an increasing number of organic and printed electronics being engineered and produced at a larger scale, the environmental cost of the final organic electronic devices (life cycle, environmental impact, etc) needs to be considered. While e-waste is already a growing global problem, improving the sustainability of emerging electronics through a careful materials selection is highly desirable. In this work, we explore the use of shellac as a sustainable greener dielectric material in organic field-effect transistors. A careful examination of shellac in combination with diketopyrrolopyrrole-based semiconducting polymers was performed on rigid substrates through atomic force microscopy (AFM) and the fabrication of thin film transistors. All devices made from this green dielectric showed good performance and device characteristics. Building from this investigation, shellac was further integrated with paper substrates to fabricate paper-based thin film transistors. Thin film samples based on shellac on both silicon wafer and paper substrates were characterized by AFM to investigate solid-state morphology of shellac and selected semiconducting materials. Through careful optimization of the device architecture and processing time, device characteristics and performances on paper substrates (average charge mobilities and on/off current ratios) were comparable to those of devices prepared on silicon wafers, confirming that shellac, in combination with organic semiconducting polymers, can be an advantageous dielectric material to be used for the fabrication of greener and sustainable thin film electronics from renewable feedstocks and components.","PeriodicalId":51335,"journal":{"name":"Flexible and Printed Electronics","volume":" ","pages":""},"PeriodicalIF":2.8000,"publicationDate":"2023-05-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Shellac as dielectric materials in organic field-effect transistors: from silicon to paper substrates\",\"authors\":\"Daniel A. Skaf, Tiago Carneiro Gomes, Robabeh Majidzadeh, R. N. Hussein, T. Carmichael, S. Rondeau‐Gagné\",\"doi\":\"10.1088/2058-8585/acda48\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Recent advances in the design and preparation of electroactive materials, particularly semiconducting and conductive polymers, have resulted in the creation of novel organic electronics with advanced functionality and performance competitive with that of devices made of silicon. With an increasing number of organic and printed electronics being engineered and produced at a larger scale, the environmental cost of the final organic electronic devices (life cycle, environmental impact, etc) needs to be considered. While e-waste is already a growing global problem, improving the sustainability of emerging electronics through a careful materials selection is highly desirable. In this work, we explore the use of shellac as a sustainable greener dielectric material in organic field-effect transistors. A careful examination of shellac in combination with diketopyrrolopyrrole-based semiconducting polymers was performed on rigid substrates through atomic force microscopy (AFM) and the fabrication of thin film transistors. All devices made from this green dielectric showed good performance and device characteristics. Building from this investigation, shellac was further integrated with paper substrates to fabricate paper-based thin film transistors. Thin film samples based on shellac on both silicon wafer and paper substrates were characterized by AFM to investigate solid-state morphology of shellac and selected semiconducting materials. Through careful optimization of the device architecture and processing time, device characteristics and performances on paper substrates (average charge mobilities and on/off current ratios) were comparable to those of devices prepared on silicon wafers, confirming that shellac, in combination with organic semiconducting polymers, can be an advantageous dielectric material to be used for the fabrication of greener and sustainable thin film electronics from renewable feedstocks and components.\",\"PeriodicalId\":51335,\"journal\":{\"name\":\"Flexible and Printed Electronics\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":2.8000,\"publicationDate\":\"2023-05-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Flexible and Printed Electronics\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1088/2058-8585/acda48\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Flexible and Printed Electronics","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1088/2058-8585/acda48","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Shellac as dielectric materials in organic field-effect transistors: from silicon to paper substrates
Recent advances in the design and preparation of electroactive materials, particularly semiconducting and conductive polymers, have resulted in the creation of novel organic electronics with advanced functionality and performance competitive with that of devices made of silicon. With an increasing number of organic and printed electronics being engineered and produced at a larger scale, the environmental cost of the final organic electronic devices (life cycle, environmental impact, etc) needs to be considered. While e-waste is already a growing global problem, improving the sustainability of emerging electronics through a careful materials selection is highly desirable. In this work, we explore the use of shellac as a sustainable greener dielectric material in organic field-effect transistors. A careful examination of shellac in combination with diketopyrrolopyrrole-based semiconducting polymers was performed on rigid substrates through atomic force microscopy (AFM) and the fabrication of thin film transistors. All devices made from this green dielectric showed good performance and device characteristics. Building from this investigation, shellac was further integrated with paper substrates to fabricate paper-based thin film transistors. Thin film samples based on shellac on both silicon wafer and paper substrates were characterized by AFM to investigate solid-state morphology of shellac and selected semiconducting materials. Through careful optimization of the device architecture and processing time, device characteristics and performances on paper substrates (average charge mobilities and on/off current ratios) were comparable to those of devices prepared on silicon wafers, confirming that shellac, in combination with organic semiconducting polymers, can be an advantageous dielectric material to be used for the fabrication of greener and sustainable thin film electronics from renewable feedstocks and components.
期刊介绍:
Flexible and Printed Electronics is a multidisciplinary journal publishing cutting edge research articles on electronics that can be either flexible, plastic, stretchable, conformable or printed. Research related to electronic materials, manufacturing techniques, components or systems which meets any one (or more) of the above criteria is suitable for publication in the journal. Subjects included in the journal range from flexible materials and printing techniques, design or modelling of electrical systems and components, advanced fabrication methods and bioelectronics, to the properties of devices and end user applications.