Quantity–quality-based water allocation programming in a reservoir–river system

Simulation–optimization approaches are useful methods for the assessment of water resource engineering plans and finding the best management policy at the watershed scale. In this study, to find the optimum operation for a reservoir with the purpose of satisfying water demands while meeting the water quantity and quality criteria, a generic reservoir and river basin simulation model (MODSIM) is coupled with the particle swarm optimization (PSO) algorithm leading to construct the PSO–MODSIM model. With the decision variables of the reservoir's monthly releases, the objective function is to maximize the supply for downstream demands while keeping the electrical conductivity (EC) in the river flow lower than a predefined level at the downstream checkpoint, which is a function of the EC in the agricultural return flows. Moreover, a safe flow rate is defined in which the streamflow should not exceed at the checkpoint resulting in mitigation of the submerging lands damage. Results obtained by the PSO–MODSIM model indicate the ability of the proposed simulation–optimization approach for solving the problem of optimal quantity–quality-based water allocation in a reservoir–river system. For instance, the EC at the checkpoint is decreased by 61% in the optimum reservoir operation state comparing the present situation, whereas the municipal and environmental demands are fully met and the agricultural demands are supplied with a desirable reliability satisfaction level.